[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Wg-test-framework] Baroque 0/1 Status
Ian, We only removed Baroque 1, and replaced the motherboard in the system. We had to go to the latest updated versions of the BIOS and Chip set Firmware. Ray took a picture of the motherboard before he removed the old board so the wiring would be correct. Only after the update was completed did we pull Baroque 0 back from the COLO. We had to perform the same updates to make them identical. Sent from my iPhone Paul l. George 508-450-9332 PLG Enterprises, Inc. 42 East Main Street Westborough, MA 01581 > On Jun 8, 2015, at 7:58 AM, Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> wrote: > > Paul L. George writes ("Baroque 0/1 Status"): >> We setup the BIOS and reloaded the OS as a test on both baroque 0/1. We >> reinstalled them both back at the COLO. > > Thanks. > > Are you sure that everything was done as intended ? My understanding > is that you intended to replace the motherboard on baroque1. > > However, the onboard NIC MAC addresses aren't what I expect: > > baroque0 baroque1 > > NIC1 MAC recorded in ansible, 00:1e:67:99:42:9d 00:1e:67:99:46:e4 > from before hardware work (also > visible in old serial logs) > > NIC1 MAC reported by BIOS, 00:1e:67:af:e4:34 00:1e:67:99:46:e4 > now, after hardware work > > Also the disk wiring is unexpected: > > WDC hard disk connection SATA 1 SATA 0 > now, as reported by BIOS > > WDC hard disk connection ata1.00 ata1.00 > before, as reported by Linux > > For reference: > > Motherboard serial number BQRP41602880 BQRP33601232 > now (as reported by BIOS) > > > Are you sure you replaced the motherboard in the correct machine ? > > It seems likely that (a) the motherboard in baroque0 has been replaced > and (b) the hard disk SATA cable was plugged into a different > connector when the machine was reassembled. > > Thanks, > Ian. _______________________________________________ Wg-test-framework mailing list Wg-test-framework@xxxxxxxxxxxxxxxxxxxx http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |