Re: [Minios-devel] [UNIKRAFT PATCHv4 21/43] plat/kvm: Add Arm64 basic entry code

[Julien Grall <julien.grall@xxxxxxx>]

On 13/07/18 11:11, Wei Chen wrote:
> Hi Julien,
Hi Wei,

> > -----Original Message-----
> > From: Julien Grall <julien.grall@xxxxxxx>
> > Sent: 2018年7月12日 18:06
> > To: Wei Chen <Wei.Chen@xxxxxxx>; minios-devel@xxxxxxxxxxxxxxxxxxxx;
> > simon.kuenzer@xxxxxxxxx
> > Cc: Kaly Xin <Kaly.Xin@xxxxxxx>; nd <nd@xxxxxxx>
> > Subject: Re: [Minios-devel] [UNIKRAFT PATCHv4 21/43] plat/kvm: Add Arm64 basic
> > entry code
> >
> >
> >
> > On 12/07/18 10:43, Wei Chen wrote:
> > > Hi Julien,
> > Hi Wei,
> >
> > > > -----Original Message-----
> > > > From: Julien Grall <julien.grall@xxxxxxx>
> > > > Sent: 2018年7月11日 23:52
> > > > To: Wei Chen <Wei.Chen@xxxxxxx>; minios-devel@xxxxxxxxxxxxxxxxxxxx;
> > > > simon.kuenzer@xxxxxxxxx
> > > > Cc: Kaly Xin <Kaly.Xin@xxxxxxx>; nd <nd@xxxxxxx>
> > > > Subject: Re: [Minios-devel] [UNIKRAFT PATCHv4 21/43] plat/kvm: Add Arm64
> > basic
> > > > entry code
> > > >
> > > >
> > > >
> > > > On 11/07/18 10:50, Wei Chen wrote:
> > > > > Hi Julien,
> > > > Hi Wei,
> > > >
> > > > > > -----Original Message-----
> > > > > > From: Julien Grall <julien.grall@xxxxxxx>
> > > > > > Sent: 2018年7月8日 6:24
> > > > > > To: Wei Chen <Wei.Chen@xxxxxxx>; minios-devel@xxxxxxxxxxxxxxxxxxxx;
> > > > > > simon.kuenzer@xxxxxxxxx
> > > > > > Cc: Kaly Xin <Kaly.Xin@xxxxxxx>; nd <nd@xxxxxxx>
> > > > > > Subject: Re: [Minios-devel] [UNIKRAFT PATCHv4 21/43] plat/kvm: Add Arm64
> > > > basic
> > > > > > entry code
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > On 07/06/2018 10:03 AM, Wei Chen wrote:
> > > > > > > QEMU/KVM can boot an Arm64 elf image without multiboot. In this case,
> > > > > > > we can plage _libkvmplat_entry to entry64.S directly as the vCPU
> > > > > > > reset entry. In this basic entry code, we just initialize the boot
> > > > > > > stack and prepare jumping to _libkvmplat_start.
> > > > > > Can you clarify why you are using the ELF format and not Image? My main
> > > > > > concern is the former does not seem to have a clear description of the
> > > > > > state of the VM at boot.
> > > > > It's little hard for me to answer your question. This is why I reply this
> > > > > Comment at the last. Actually, when I was selecting the elf image I didn’t
> > > > > think so much. And most Unikernel projects that I have involved (ukvm,
> > mini-
> > > > os)
> > > > > are using the elf image, both for arm and x86.
> > > > Mini-OS ARM is using the zImage format, not ELF. For UKVM, IIRC, you
> > > Yes, arm32 is zImage, but x86_64 is using OUTPUT_FORMAT("elf64-x86-64").
> > > And about the ukvm, Yes, I wrote it by myself, because the ukvm requires elf
> > > format, it only support elf loader. We want to make our Unikernel
> > application
> > > like a normal elf application that can run on virtual machine directly. We
> > don't
> > > want to be compatible with the Linux image boot protocol, it's too complex
> > for us.
> > > And we don't have some many information need to pass.
> > Why is it too complex? The Image format is basically a couple fields to
> > slap at the top of your binary and a few guidelines for the tools how to
> > deal with the VM state. Most of the boot code will be the same.
> >
> > Also, most likely if you are going to support kvmtools, you would need
> > to use the Image format. For Xen, support for ELF will require a lot of
> > reworks and to be honest it is not worth the effort (I tried it before).
> I have read the Xen code and Shijie's Arm64 mini-OS patches. Shijie was
> Using elf format as image.From his code, I didn't see lots of reworks
> That I need to do If I will enable elf format for Xen?
Arm64 Mini-OS is not using ELF. Xen tools does not have ELF support for 
Arm, and you can look at the patch [1] to see the image been created 
using objcopy.

> Kvmtools doesn't support Arm elf loader. But it supports other architectures.
> And as your said, if we using the kernel image format? How about ukvm,
> it requires elf format? Relative to kvmtools, I am more like to support ukvm.
> Because in a way, qemu and kvmtools are overlapping. Actually, I don't mind to
> provide different image format for different platform.
May I ask why did you decide to require using ELF for UKVM? What was the 
rationale? Is that just because x86 was doing it?
But then why using that for QEMU? You need to compile your ELF assuming 
VA == PA, which is rather fragile. You also yet haven't told me what is 
the expect ABI (e.g state of the machine...) for ELF.
> > > > wrote it yourself. So I guess you based your understanding of the state
> > > > of the VM from somewhere?
> > > Each SoC, include QEMU virtual machine, they will give most system registers
> > > a default value. I am using cortex-a53 VCPU, the QEMU gives it a reset value
> > > to cpu->reset_sctlr = 0x00c50838; MMU, I/D cache are disabled.
> > > But yes, you're right, I ignore the MMU has been disabled already, and
> > disable
> > > It again in entry code.
> > This looks very fragile to rely on for a specific processor. What if we
> > decide to use another Cortex-A*? Or even another Arm CPU?
> >
> > We need a clear definition of the VM state. For instance, you say the
> > cache is disabled. Has the kernel image/DT been cleaned to PoC by the
> > tools? You will also have to be careful when writing the page-table as
> > "Cache disabled" does not rely mean "disabled". It is more a by-pass of
> > the cache.
> I can read them from sctlr if I want. I am curious about how does other
> Bootloader handle such case? Don't think my code is an entry code for
> OS. Let's treat it as a bootloader.
I don't understand what you mean. Whether your code is a bootloader or 
an OS, you have to know exactly what is the state of your platform when 
the processor jumps to your entry code.
Your Image has been loaded by QEMU in the memory. If you modify the 
page-table with cache disabled and not clean the DT. Then you may end up 
using stall information when re-enabling the cache.
If you disable the MMU, then this will still have an impact on your 
cache as well. This is because KVM has alias to that region you will 
modify and therefore you may have stall data in your cache when turning 
on the MMU.
Overall, I think you should treat Unikraft as an OS as usually the 
format will give you more guaranty than the platform itself. This will 
also allow you to re-use that code accross multiple environment rather 
than tailoring for QEMU.
Cheers,

[1] 
https://lists.xenproject.org/archives/html/minios-devel/2018-04/msg00139.html
--
Julien Grall

_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel