|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [ARM PCI] Rockchip PCI devices not recognized in Dom0
Hi Rahul, > IRQ related failure here.. >> [ 0.090309] irq: type mismatch, failed to map hwirq-32 for >> interrupt-controller! >> [ 0.107181] platform ff940000.hdmi: Fixing up cyclic dependency with >> ff8f0000.vop >> [ 0.107368] platform ff940000.hdmi: Fixing up cyclic dependency with >> ff900000.vop >> [ 0.108136] irq: type mismatch, failed to map hwirq-32 for >> interrupt-controller! > PCIe bus init failed here because of that none of the PCI device recognized. > As there is IRQ related failure in logs above > maybe something related to PCI legacy interrupt causing the failure here. > > The only difference I can see between the native Linux logs and dom0 logs is > that PCI devices use MSI/MSI-X interrupt in > native Linux. Could you try to enable ITS in XEN and try again if PCI devices > are recognized? > > You can enable ITS in XEN via CONFIG_HAS_ITS. > > diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig > index be9eff0141..88f3837d80 100644 > --- a/xen/arch/arm/Kconfig > +++ b/xen/arch/arm/Kconfig > @@ -17,6 +17,7 @@ config ARM > select HAS_PDX > select HAS_PMAP > select IOMMU_FORCE_PT_SHARE > + select HAS_ITS > > config ARCH_DEFCONFIG > string > > Regards, > Rahul > I recompiled the hypervisor with CONFIG_HAS_ITS as requested but problem persists. Please see new hypervisor and dom0 log below. # hypervisor.log # (XEN) Checking for initrd in /chosen (XEN) RAM: 0000000000200000 - 00000000080ecfff (XEN) RAM: 0000000008113000 - 00000000b5b67fff (XEN) RAM: 00000000b5b68000 - 00000000b5b7afff (XEN) RAM: 00000000b5b7b000 - 00000000b5cabfff (XEN) RAM: 00000000b5cbc000 - 00000000b7bb3fff (XEN) RAM: 00000000b7bb4000 - 00000000f4ee2fff (XEN) RAM: 00000000f4ee3000 - 00000000f4ee3fff (XEN) RAM: 00000000f4ee6000 - 00000000f4ee9fff (XEN) RAM: 00000000f4eea000 - 00000000f4f0dfff (XEN) RAM: 00000000f4f15000 - 00000000f4f15fff (XEN) RAM: 00000000f4f1a000 - 00000000f4f1afff (XEN) RAM: 00000000f4f20000 - 00000000f4f20fff (XEN) RAM: 00000000f4f22000 - 00000000f4f22fff (XEN) RAM: 00000000f4f24000 - 00000000f4f25fff (XEN) RAM: 00000000f4f27000 - 00000000f4f28fff (XEN) RAM: 00000000f4f29000 - 00000000f7f3ffff (XEN) RAM: 00000000f7f50000 - 00000000f7ffffff (XEN) (XEN) MODULE[0]: 00000000b5b7b000 - 00000000b5cab0c8 Xen (XEN) MODULE[1]: 00000000b5b69000 - 00000000b5b7a000 Device Tree (XEN) MODULE[2]: 00000000b6102000 - 00000000b7ac7200 Kernel (XEN) MODULE[3]: 00000000b5cbc000 - 00000000b6100721 Ramdisk (XEN) (XEN) CMDLINE[00000000b6102000]:chosen modloop=/modloop-nanopi-r4s modules=loop,squashfs,usb-storage noquiet ro loglevel=8 clk_ignore_unused console=hvc0 earlycon=xen earlyprintk=xen (XEN) (XEN) Command line: console=dtuart dtuart=serial2 loglvl=all guest_loglvl=all dom0_mem=1G dom0_vpcus=1 (XEN) parameter "dom0_vpcus" unknown! (XEN) Domain heap initialised (XEN) Booting using Device Tree (XEN) Platform: Generic System (XEN) Looking for dtuart at "serial2", options "" Xen 4.16.1 (XEN) Xen version 4.16.1 (bob@my.domain) (gcc (Alpine 11.2.1_git20220219) 11.2.1 20220219) debug=n Tue Jul 5 16:01:55 BST 2022 (XEN) Latest ChangeSet: (XEN) build-id: 07222392a56897d1ce72b6465c15c0c8d7c58398 (XEN) Processor: 00000000410fd034: "ARM Limited", variant: 0x0, part 0xd03,rev 0x4 (XEN) 64-bit Execution: (XEN) Processor Features: 0000000001002222 0000000000000000 (XEN) Exception Levels: EL3:64+32 EL2:64+32 EL1:64+32 EL0:64+32 (XEN) Extensions: FloatingPoint AdvancedSIMD GICv3-SysReg (XEN) Debug Features: 0000000010305106 0000000000000000 (XEN) Auxiliary Features: 0000000000000000 0000000000000000 (XEN) Memory Model Features: 0000000000001122 0000000000000000 (XEN) ISA Features: 0000000000011120 0000000000000000 (XEN) 32-bit Execution: (XEN) Processor Features: 0000000000000131:0000000010011011 (XEN) Instruction Sets: AArch32 A32 Thumb Thumb-2 Jazelle (XEN) Extensions: GenericTimer Security (XEN) Debug Features: 0000000003010066 (XEN) Auxiliary Features: 0000000000000000 (XEN) Memory Model Features: 0000000010201105 0000000040000000 (XEN) 0000000001260000 0000000002102211 (XEN) ISA Features: 0000000002101110 0000000013112111 0000000021232042 (XEN) 0000000001112131 0000000000011142 0000000000011121 (XEN) Using SMC Calling Convention v1.2 (XEN) Using PSCI v1.1 (XEN) SMP: Allowing 6 CPUs (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 24000 KHz (XEN) GICv3 initialization: (XEN) gic_dist_addr=0x000000fee00000 (XEN) gic_maintenance_irq=25 (XEN) gic_rdist_stride=0 (XEN) gic_rdist_regions=1 (XEN) redistributor regions: (XEN) - region 0: 0x000000fef00000 - 0x000000fefc0000 (XEN) GICv3 compatible with GICv2 cbase 0x000000fff00000 vbase 0x000000fff20000 (XEN) GICv3: using at most 57344 LPIs on the host. (XEN) GICv3: 288 lines, (IID 0001143b). (XEN) GICv3: Found ITS @0xfee20000 (XEN) using non-cacheable ITS command queue (XEN) GICv3: CPU0: Found redistributor in region 0 @000000004001c000 (XEN) XSM Framework v1.0.1 initialized (XEN) Initialising XSM SILO mode (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2) (XEN) Initializing Credit2 scheduler (XEN) load_precision_shift: 18 (XEN) load_window_shift: 30 (XEN) underload_balance_tolerance: 0 (XEN) overload_balance_tolerance: -3 (XEN) runqueues arrangement: socket (XEN) cap enforcement granularity: 10ms (XEN) load tracking window length 1073741824 ns (XEN) Allocated console ring of 64 KiB. (XEN) CPU0: Guest atomics will try 7 times before pausing the domain (XEN) Bringing up CPU1 (XEN) GICv3: CPU1: Found redistributor in region 0 @000000004003c000 (XEN) CPU1: Guest atomics will try 9 times before pausing the domain (XEN) CPU 1 booted. (XEN) Bringing up CPU2 (XEN) GICv3: CPU2: Found redistributor in region 0 @000000004005c000 (XEN) CPU2: Guest atomics will try 8 times before pausing the domain (XEN) CPU 2 booted. (XEN) Bringing up CPU3 (XEN) GICv3: CPU3: Found redistributor in region 0 @000000004007c000 (XEN) CPU3: Guest atomics will try 10 times before pausing the domain (XEN) CPU 3 booted. (XEN) Bringing up CPU4 (XEN) CPU4 MIDR (0x00000000410fd082) does not match boot CPU MIDR (0x00000000410fd034), (XEN) disable cpu (see big.LITTLE.txt under docs/). (XEN) CPU4 never came online (XEN) Failed to bring up CPU 4 (error -5) (XEN) Bringing up CPU5 (XEN) CPU5 MIDR (0x00000000410fd082) does not match boot CPU MIDR (0x00000000410fd034), (XEN) disable cpu (see big.LITTLE.txt under docs/). (XEN) CPU5 never came online (XEN) Failed to bring up CPU 5 (error -5) (XEN) Brought up 4 CPUs (XEN) I/O virtualisation disabled (XEN) P2M: 40-bit IPA with 40-bit PA and 8-bit VMID (XEN) P2M: 3 levels with order-1 root, VTCR 0x0000000080023558 (XEN) Scheduling granularity: cpu, 1 CPU per sched-resource (XEN) Adding cpu 0 to runqueue 0 (XEN) First cpu on runqueue, activating (XEN) Adding cpu 1 to runqueue 0 (XEN) Adding cpu 2 to runqueue 0 (XEN) Adding cpu 3 to runqueue 0 (XEN) alternatives: Patching with alt table 00000000002bcc88 -> 00000000002bd594 (XEN) *** LOADING DOMAIN 0 *** (XEN) Loading d0 kernel from boot module @ 00000000b6102000 (XEN) Loading ramdisk from boot module @ 00000000b5cbc000 (XEN) Allocating 1:1 mappings totalling 1024MB for dom0: (XEN) BANK[0] 0x00000040000000-0x00000080000000 (1024MB) (XEN) Grant table range: 0x000000b5b7b000-0x000000b5bbb000 (XEN) /pinctrl/pcie: Missing device_type (XEN) /pinctrl/pcie: Missing device_type (XEN) Allocating PPI 16 for event channel interrupt (XEN) Extended region 0: 0x200000->0x8000000 (XEN) Extended region 1: 0x8200000->0x40000000 (XEN) Extended region 2: 0x80000000->0xb5a00000 (XEN) Extended region 3: 0xb5e00000->0xf4e00000 (XEN) Loading zImage from 00000000b6102000 to 0000000040000000-00000000419c5200 (XEN) Loading d0 initrd from 00000000b5cbc000 to 0x0000000048200000-0x0000000048644721 (XEN) Loading d0 DTB to 0x0000000048000000-0x000000004800dc06 (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Scrubbing Free RAM in background (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input) (XEN) Freed 328kB init memory. (XEN) d0v0 Unhandled SMC/HVC: 0x84000050 (XEN) d0v0 Unhandled SMC/HVC: 0x8600ff01 (XEN) d0v0: vGICD: RAZ on reserved register offset 0x00000c (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28 (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER32 (XEN) d0v0: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0 (XEN) d0v0 Unhandled SMC/HVC: 0x82000008 (XEN) d0v1: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0 (XEN) d0v2: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0 (XEN) d0v3: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0 # dom0.log # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.18.0-0-nanopi-r4s (bob@alpine-dev) (gcc (Alpine 11.2.1_git20220219) 11.2.1 20220219, GNU ld (GNU Binutils) 2.38) #1-Alpine SMP PREEMPT Wed, 29 Jun 2022 05:35:43 +0000 [ 0.000000] Machine model: FriendlyElec NanoPi R4S [ 0.000000] Xen 4.16 support found [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 16 MiB at 0x000000007dc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 28 pages/cpu s77368 r8192 d29128 u114688 [ 0.000000] pcpu-alloc: s77368 r8192 d29128 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Kernel command line: modloop=/modloop-nanopi-r4s modules=loop,squashfs,usb-storage noquiet ro loglevel=8 clk_ignore_unused console=hvc0 earlycon=xen earlyprintk=xen [ 0.000000] Unknown kernel command line parameters "noquiet modloop=/modloop-nanopi-r4s modules=loop,squashfs,usb-storage earlyprintk=xen", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 979800K/1048576K available (14272K kernel code, 2772K rwdata, 4132K rodata, 5120K init, 779K bss, 52392K reserved, 16384K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 44736 entries in 175 pages [ 0.000000] ftrace: allocated 175 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @41d80000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x00000000fee20000: allocated 32768 Interrupt Collections @41e00000 (flat, esz 2, psz 64K, shr 1) [ 0.000000] GICv3: using LPI property table @0x0000000041e10000 [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000041e20000 [ 0.000000] random: get_random_bytes called from start_kernel+0x4ec/0x6d8 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001275] Console: colour dummy device 80x25 [ 0.002745] printk: console [hvc0] enabled [ 0.002830] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002884] pid_max: default: 32768 minimum: 301 [ 0.003068] LSM: Security Framework initializing [ 0.003245] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.003307] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.006319] cblist_init_generic: Setting adjustable number of callback queues. [ 0.006386] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.006580] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.006790] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.007741] xen:grant_table: Grant tables using version 1 layout [ 0.007834] Grant table initialized [ 0.007897] xen:events: Using FIFO-based ABI [ 0.007995] Xen: initializing cpu0 [ 0.008310] rcu: Hierarchical SRCU implementation. [ 0.009518] Platform MSI: interrupt-controller domain created [ 0.010022] PCI/MSI: /interrupt-controller/interrupt-controller domain created [ 0.010295] EFI services will not be available. [ 0.011112] smp: Bringing up secondary CPUs ... [ 0.012450] Detected VIPT I-cache on CPU1 [ 0.012519] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.012628] GICv3: CPU1: using allocated LPI pending table @0x0000000041e30000 [ 0.012730] Xen: initializing cpu1 [ 0.012822] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.014251] Detected VIPT I-cache on CPU2 [ 0.014312] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.014399] GICv3: CPU2: using allocated LPI pending table @0x0000000041e40000 [ 0.014479] Xen: initializing cpu2 [ 0.014558] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.016055] Detected VIPT I-cache on CPU3 [ 0.016120] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.016209] GICv3: CPU3: using allocated LPI pending table @0x0000000041e50000 [ 0.016294] Xen: initializing cpu3 [ 0.016376] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.016652] smp: Brought up 1 node, 4 CPUs [ 0.017021] SMP: Total of 4 processors activated. [ 0.017050] CPU features: detected: 32-bit EL0 Support [ 0.017091] CPU features: detected: CRC32 instructions [ 0.018166] CPU: All CPU(s) started at EL1 [ 0.018268] alternatives: patching kernel code [ 0.020236] devtmpfs: initialized [ 0.022652] Duplicate name in interrupt-controller, renamed to "interrupt-controller#1" [ 0.040898] Registered cp15_barrier emulation handler [ 0.041009] Registered setend emulation handler [ 0.041390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.041464] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.042520] pinctrl core: initialized pinctrl subsystem [ 0.043690] DMI not present or invalid. [ 0.044672] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.048329] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.048650] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.048991] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.049137] audit: initializing netlink subsys (disabled) [ 0.049558] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1 [ 0.052352] thermal_sys: Registered thermal governor 'fair_share' [ 0.052367] thermal_sys: Registered thermal governor 'step_wise' [ 0.052664] OF: /thermal-zones/cpu-thermal/cooling-maps/map0: could not find phandle 6 [ 0.052792] thermal_sys: Add a cooling_device property with at least one device [ 0.052839] thermal_sys: failed to build thermal zone cpu-thermal: -2 [ 0.053435] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.053916] ASID allocator initialised with 65536 entries [ 0.054023] xen:swiotlb_xen: Warning: only able to allocate 4 MB for software IO TLB [ 0.055183] software IO TLB: mapped [mem 0x0000000042800000-0x0000000042c00000] (4MB) [ 0.057927] ------------[ cut here ]------------ [ 0.057964] WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic-v3.c:1555 gic_irq_domain_select+0x134/0x19c [ 0.058040] Modules linked in: [ 0.058071] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-0-nanopi-r4s #1-Alpine [ 0.058124] Hardware name: FriendlyElec NanoPi R4S (DT) [ 0.058151] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.058190] pc : gic_irq_domain_select+0x134/0x19c [ 0.058237] lr : gic_irq_domain_select+0xac/0x19c [ 0.058273] sp : ffffffc009aab910 [ 0.058294] x29: ffffffc009aab910 x28: 0000000000000000 x27: ffffff8001f46a80 [ 0.058360] x26: ffffffc009aaba18 x25: ffffff803fdb50c8 x24: 0000000000000001 [ 0.058412] x23: ffffff803fdb50b0 x22: ffffffc008f3e600 x21: 0000000000000000 [ 0.058476] x20: ffffff8001c14300 x19: ffffffc009aaba18 x18: ffffffffffffffff [ 0.058529] x17: 3030306332343030 x16: 0000000000000014 x15: ffffff800252de03 [ 0.058592] x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 [ 0.058644] x11: 0000000000000040 x10: 000000000005d9f8 x9 : ffffffc0086ec310 [ 0.058707] x8 : ffffffc009aabb38 x7 : 0000000000000000 x6 : 070f1900f2f2f5f0 [ 0.058758] x5 : ffffffc008f3e600 x4 : 00000000a110c8ee x3 : ffffffc009aab94c [ 0.058810] x2 : ffffffc009aab950 x1 : ffffffc009aaba18 x0 : 00000000ffffffea [ 0.058874] Call trace: [ 0.058892] gic_irq_domain_select+0x134/0x19c [ 0.058928] irq_find_matching_fwspec+0x84/0x120 [ 0.058977] irq_create_fwspec_mapping+0x48/0x32c [ 0.059014] irq_create_of_mapping+0x70/0xa0 [ 0.059048] of_irq_get+0x98/0xe0 [ 0.059093] of_irq_to_resource+0x40/0x110 [ 0.059125] of_irq_to_resource_table+0x5c/0x84 [ 0.059159] of_device_alloc+0x10c/0x200 [ 0.059199] of_platform_device_create_pdata+0x64/0x104 [ 0.059233] of_platform_bus_create+0x1bc/0x4cc [ 0.059264] of_platform_populate+0x6c/0x144 [ 0.059306] of_platform_default_populate_init+0xf0/0x110 [ 0.059344] do_one_initcall+0x50/0x29c [ 0.059375] kernel_init_freeable+0x22c/0x2b4 [ 0.059408] kernel_init+0x30/0x140 [ 0.059450] ret_from_fork+0x10/0x20 [ 0.059480] ---[ end trace 0000000000000000 ]--- [ 0.059576] irq: no irq domain found for interrupt-controller ! [ 0.091626] irq: type mismatch, failed to map hwirq-32 for interrupt-controller! [ 0.108460] platform ff940000.hdmi: Fixing up cyclic dependency with ff8f0000.vop [ 0.108647] platform ff940000.hdmi: Fixing up cyclic dependency with ff900000.vop [ 0.109452] irq: type mismatch, failed to map hwirq-32 for interrupt-controller! [ 0.124634] rockchip-gpio ff720000.gpio: probed /pinctrl/gpio@ff720000 [ 0.126113] rockchip-gpio ff730000.gpio: probed /pinctrl/gpio@ff730000 [ 0.127396] rockchip-gpio ff780000.gpio: probed /pinctrl/gpio@ff780000 [ 0.128755] rockchip-gpio ff788000.gpio: probed /pinctrl/gpio@ff788000 [ 0.130051] rockchip-gpio ff790000.gpio: probed /pinctrl/gpio@ff790000 [ 0.158741] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.158818] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.158853] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.158887] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.159832] cryptd: max_cpu_qlen set to 1000 [ 0.161674] xen:balloon: Initialising balloon driver [ 0.164418] iommu: Default domain type: Translated [ 0.164477] iommu: DMA domain TLB invalidation policy: strict mode [ 0.165026] SCSI subsystem initialized [ 0.165505] libata version 3.00 loaded. [ 0.165912] usbcore: registered new interface driver usbfs [ 0.166008] usbcore: registered new interface driver hub [ 0.166110] usbcore: registered new device driver usb [ 0.166303] pps_core: LinuxPPS API ver. 1 registered [ 0.166333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.166404] PTP clock support registered [ 0.168946] Bluetooth: Core ver 2.22 [ 0.169038] NET: Registered PF_BLUETOOTH protocol family [ 0.169068] Bluetooth: HCI device and connection manager initialized [ 0.169110] Bluetooth: HCI socket layer initialized [ 0.169157] Bluetooth: L2CAP socket layer initialized [ 0.169218] Bluetooth: SCO socket layer initialized [ 0.169284] NetLabel: Initializing [ 0.169307] NetLabel: domain hash size = 128 [ 0.169333] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.169603] NetLabel: unlabeled traffic allowed by default [ 0.170742] clocksource: Switched to clocksource arch_sys_counter [ 0.276961] VFS: Disk quotas dquot_6.6.0 [ 0.277106] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.277384] FS-Cache: Loaded [ 0.296510] NET: Registered PF_INET protocol family [ 0.296788] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.298288] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes, linear) [ 0.298508] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.298670] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.299106] TCP: Hash tables configured (established 8192 bind 8192) [ 0.299340] UDP hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.299460] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes, linear) [ 0.299864] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.300920] RPC: Registered named UNIX socket transport module. [ 0.300958] RPC: Registered udp transport module. [ 0.300996] RPC: Registered tcp transport module. [ 0.301023] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.301063] PCI: CLS 0 bytes, default 64 [ 0.301562] Trying to unpack rootfs image as initramfs... [ 0.654177] Freeing initrd memory: 4368K [ 1.857984] Initialise system trusted keyrings [ 1.858487] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 1.869803] zbud: loaded [ 1.874085] NFS: Registering the id_resolver key type [ 1.874176] Key type id_resolver registered [ 1.874203] Key type id_legacy registered [ 1.874366] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.874414] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.874900] fuse: init (API version 7.36) [ 1.949183] Key type asymmetric registered [ 1.949234] Asymmetric key parser 'x509' registered [ 1.949341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.949744] io scheduler mq-deadline registered [ 1.949778] io scheduler kyber registered [ 1.968981] irq: type mismatch, failed to map hwirq-32 for interrupt-controller! [ 1.970845] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.970913] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 1.971229] irq: type mismatch, failed to map hwirq-32 for interrupt-controller! [ 1.973754] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.973812] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.976210] xen:xen_evtchn: Event-channel device installed [ 1.980110] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled [ 1.989223] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.997642] brd: module loaded [ 2.009739] loop: module loaded [ 2.011175] zram: Added device: zram0 [ 2.013995] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 2.014402] db_root: cannot open: /etc/target [ 2.017304] QLogic/NetXen Network Driver v4.0.82 [ 2.019231] PPP generic driver version 2.4.2 [ 2.019597] xen_netfront: Initialising Xen virtual ethernet driver [ 2.019861] usbcore: registered new interface driver asix [ 2.019951] usbcore: registered new interface driver ax88179_178a [ 2.020040] usbcore: registered new interface driver cdc_ether [ 2.020125] usbcore: registered new interface driver qmi_wwan [ 2.020159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.020210] ehci-pci: EHCI PCI platform driver [ 2.020296] ehci-platform: EHCI generic platform driver [ 2.022803] ehci-platform fe380000.usb: EHCI Host Controller [ 2.022868] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1 [ 2.023174] ehci-platform fe380000.usb: irq 18, io mem 0xfe380000 [ 2.038775] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 2.039205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.039255] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.039296] usb usb1: Product: EHCI Host Controller [ 2.039327] usb usb1: Manufacturer: Linux 5.18.0-0-nanopi-r4s ehci_hcd [ 2.039361] usb usb1: SerialNumber: fe380000.usb [ 2.040316] hub 1-0:1.0: USB hub found [ 2.040393] hub 1-0:1.0: 1 port detected [ 2.041403] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 2.041451] ehci-platform fe3c0000.usb: EHCI Host Controller [ 2.041505] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2 [ 2.041806] ehci-platform fe3c0000.usb: irq 20, io mem 0xfe3c0000 [ 2.054790] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00 [ 2.055206] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.18 [ 2.055256] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.055297] usb usb2: Product: EHCI Host Controller [ 2.055330] usb usb2: Manufacturer: Linux 5.18.0-0-nanopi-r4s ehci_hcd [ 2.055365] usb usb2: SerialNumber: fe3c0000.usb [ 2.056248] hub 2-0:1.0: USB hub found [ 2.056333] hub 2-0:1.0: 1 port detected [ 2.057535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.057598] ohci-platform: OHCI generic platform driver [ 2.058072] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 2.058132] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3 [ 2.058397] ohci-platform fe3a0000.usb: irq 19, io mem 0xfe3a0000 [ 2.119062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.119127] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.119168] usb usb3: Product: Generic Platform OHCI controller [ 2.119203] usb usb3: Manufacturer: Linux 5.18.0-0-nanopi-r4s ohci_hcd [ 2.119245] usb usb3: SerialNumber: fe3a0000.usb [ 2.120159] hub 3-0:1.0: USB hub found [ 2.120243] hub 3-0:1.0: 1 port detected [ 2.121158] rockchip-usb2phy ff770000.syscon:usb2phy@e460: Requested PHY is disabled [ 2.121205] ohci-platform fe3e0000.usb: Generic Platform OHCI controller [ 2.121260] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4 [ 2.121558] ohci-platform fe3e0000.usb: irq 21, io mem 0xfe3e0000 [ 2.183072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.18 [ 2.183136] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.183177] usb usb4: Product: Generic Platform OHCI controller [ 2.183212] usb usb4: Manufacturer: Linux 5.18.0-0-nanopi-r4s ohci_hcd [ 2.183254] usb usb4: SerialNumber: fe3e0000.usb [ 2.184151] hub 4-0:1.0: USB hub found [ 2.184228] hub 4-0:1.0: 1 port detected [ 2.186421] usbcore: registered new interface driver cdc_acm [ 2.186460] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.186564] usbcore: registered new interface driver cdc_wdm [ 2.187153] usbcore: registered new interface driver uas [ 2.187332] usbcore: registered new interface driver usb-storage [ 2.187513] usbcore: registered new interface driver usbserial_generic [ 2.187581] usbserial: USB Serial support registered for generic [ 2.187684] usbcore: registered new interface driver ch341 [ 2.187744] usbserial: USB Serial support registered for ch341-uart [ 2.187856] usbcore: registered new interface driver cp210x [ 2.187916] usbserial: USB Serial support registered for cp210x [ 2.188063] usbcore: registered new interface driver ftdi_sio [ 2.188127] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.188369] usbcore: registered new interface driver option [ 2.188436] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.188776] usbcore: registered new interface driver pl2303 [ 2.188838] usbserial: USB Serial support registered for pl2303 [ 2.188953] usbcore: registered new interface driver qcserial [ 2.189021] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.189724] mousedev: PS/2 mouse device common for all mice [ 2.191217] i2c_dev: i2c /dev entries driver [ 2.203940] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.204017] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.205303] dw_wdt ff848000.watchdog: No valid TOPs array specified [ 2.206362] device-mapper: uevent: version 1.0.3 [ 2.206940] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@xxxxxxxxxx [ 2.207563] cpu cpu0: OPP table can't be empty [ 2.209177] sdhci: Secure Digital Host Controller Interface driver [ 2.209224] sdhci: Copyright(c) Pierre Ossman [ 2.209250] Synopsys Designware Multimedia Card Interface Driver [ 2.210112] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.213470] ledtrig-cpu: registered to indicate activity on CPUs [ 2.214610] hid: raw HID events driver (C) Jiri Kosina [ 2.215233] usbcore: registered new interface driver usbhid [ 2.215281] usbhid: USB HID core driver [ 2.218095] Initializing XFRM netlink socket [ 2.218927] NET: Registered PF_INET6 protocol family [ 2.220838] Segment Routing with IPv6 [ 2.220920] In-situ OAM (IOAM) with IPv6 [ 2.223003] bpfilter: Loaded bpfilter_umh pid 82 [ 2.223402] NET: Registered PF_PACKET protocol family [ 2.223765] Bluetooth: RFCOMM TTY layer initialized [ 2.223813] Bluetooth: RFCOMM socket layer initialized [ 2.223869] Bluetooth: RFCOMM ver 1.11 [ 2.223919] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.223970] Bluetooth: HIDP socket layer initialized [ 2.224111] Key type dns_resolver registered [ 2.224772] registered taskstats version 1 [ 2.224815] Loading compiled-in X.509 certificates [ 2.228143] zswap: loaded using pool zstd/zsmalloc [ 2.229044] Key type ._fscrypt registered [ 2.229088] Key type .fscrypt registered [ 2.229113] Key type fscrypt-provisioning registered [ 2.338938] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.339018] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.344059] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 2.347978] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 2.352009] rk808 0-001b: chip id: 0x0 [ 2.359278] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.359381] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.379611] random: fast init done [ 2.381238] rk808-rtc rk808-rtc: registered as rtc0 [ 2.382068] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:20 UTC (1358499020) [ 2.383772] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.383833] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.387018] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 2.387121] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 2.387163] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 2.387334] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 17,32 bit host data width,256 deep fifo [ 2.388166] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 2.388602] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.388705] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 2.388779] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 2.389775] rockchip-pcie f8000000.pcie: no vpcie12v regulator found [ 2.391148] genirq: Setting trigger mode 2 for irq 15 failed (gic_set_type+0x0/0x1b0) [ 2.391378] irq: no irq domain found for interrupt-controller ! [ 2.391417] rockchip-pcie f8000000.pcie: error -ENXIO: IRQ client not found [ 2.396400] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found [ 2.396475] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found [ 2.396728] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock [ 2.397045] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 2.397091] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 2.397128] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11). [ 2.397174] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 2.397299] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ 2.397336] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 2.401498] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.402387] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 2.402928] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 2.403153] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 [ 2.403194] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported [ 2.403239] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported [ 2.403276] rk_gmac-dwmac fe300000.ethernet: COE Type 2 [ 2.403307] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported [ 2.403348] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported [ 2.403480] rk_gmac-dwmac fe300000.ethernet: Normal descriptors [ 2.403517] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled [ 2.403549] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 2.403603] rk_gmac-dwmac fe300000.ethernet: device MAC address 0e:21:cc:19:21:29 [ 2.510543] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.510623] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.514114] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.514190] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.515701] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.515763] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.519469] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.520510] clk: Not disabling unused clocks [ 2.521558] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.521620] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 2.527507] Freeing unused kernel memory: 5120K [ 2.534811] Run /init as init process [ 2.534856] with arguments: [ 2.534882] /init [ 2.534902] noquiet [ 2.534922] with environment: [ 2.534944] HOME=/ [ 2.534964] TERM=linux [ 2.534984] modloop=/modloop-nanopi-r4s [ 2.535007] modules=loop,squashfs,usb-storage [ 2.535034] earlyprintk=xen [ 2.607827] Alpine Init 3.6.2-r0 [ 2.609664] Loading boot drivers... [ 2.628279] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.631141] Loading boot drivers: ok. [ 2.640816] Mounting boot media... [ 2.688338] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 2.840301] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 163 [ 2.840419] mmc1: new ultra high speed SDR104 SDHC card at address aaaa [ 2.848645] mmcblk1: mmc1:aaaa SD32G 29.7 GiB [ 2.862977] mmcblk1: p1 p2 p3 [ 2.865914] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 2.866006] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 3.555908] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 3.604980] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none. [ 3.658851] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Quota mode: none. [ 3.667107] Mounting boot media: ok. [ 3.676783] Loading user settings from /media/mmcblk1p2/boot.apkovl.tar.gz... [ 3.747007] Loading user settings from /media/mmcblk1p2/boot.apkovl.tar.gz: ok. [ 3.867666] Installing packages to root filesystem... [ 15.184165] Installing packages to root filesystem: ok. [ 16.743889] loop0: detected capacity change from 0 to 28456 [ 16.769173] FAT-fs (loop0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 16.772253] exFAT-fs (loop0): invalid boot record signature [ 16.772278] exFAT-fs (loop0): failed to read boot sector [ 16.772289] exFAT-fs (loop0): failed to recognize exfat type [ 16.777914] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0xcf480ed2) [ 16.777949] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock [ 16.778119] F2FS-fs (loop0): Magic Mismatch, valid(0xf2f52010) - read(0x6ca73354) [ 16.778137] F2FS-fs (loop0): Can't find valid F2FS filesystem in 2th superblock [ 16.824848] overlayfs: "xino" feature enabled using 3 upper inode bits. [ 33.676227] xen_wdt xen_wdt: initialized (timeout=60s, nowayout=0) [ 33.677920] rockchip-thermal ff260000.tsadc: failed to register sensor 0: -517 [ 33.677954] rockchip-thermal ff260000.tsadc: failed to register sensor[0] : error = -517 [ 33.705604] tun: Universal TUN/TAP device driver, 1.6 [ 33.762906] vbus_typec: disabling [ 33.762968] vcca0v9_s3: disabling [ 34.281799] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none. [ 34.430249] /dev/sda1: Can't open blockdev [ 35.400443] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=61) [ 35.434964] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 35.436266] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 35.436291] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 35.437933] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ 35.659250] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 35.666115] xenbr0: port 1(eth0) entered blocking state [ 35.666189] xenbr0: port 1(eth0) entered disabled state [ 35.666577] device eth0 entered promiscuous mode [ 37.761661] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 37.761728] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 37.761994] xenbr0: port 1(eth0) entered blocking state [ 37.762015] xenbr0: port 1(eth0) entered forwarding state [ 37.762160] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready [ 45.470773] random: crng init done
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |