|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Only one CPU available to Xen? (nr_cpus : 1)
[Moving over to xen-devel, cc'ing a few people] On Tue, Mar 6, 2018 at 8:16 AM, John Naggets <hostingnuggets@xxxxxxxxx> wrote: > Hi George, > > You will find the output of "xl dmesg" below. I also managed to > reproduce this problem on another test server. That test server is an > IBM System x3250 M5 server which uses UEFI. So the hardware is not at > fault. > > Regards, > John > > (XEN) Xen version 4.9.0 (Ubuntu 4.9.0-0ubuntu3) > (stefan.bader@xxxxxxxxxxxxx) (gcc (Ubuntu 7.2.0-8ubuntu2) 7.2.0) > debug=n Fri Oct 13 15:58:41 UTC 2017 > (XEN) Bootloader: GRUB 2.02~beta3-4ubuntu7 > (XEN) Command line: placeholder dom0_mem=4G,max:4G dom0_max_vcpus=2 > dom0_vcpus_pin no-real-mode edd=off > (XEN) Xen image load base address: 0 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) Disc information: > (XEN) Found 0 MBR signatures > (XEN) Found 0 EDD information structures > (XEN) Multiboot-e820 RAM map: > (XEN) 0000000000000000 - 00000000000a0000 (usable) > (XEN) 00000000000a0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000009e3f8000 (usable) > (XEN) 000000009e3f8000 - 000000009e568000 (ACPI data) > (XEN) 000000009e568000 - 000000009efe1000 (ACPI NVS) > (XEN) 000000009efe1000 - 00000000a0117000 (usable) > (XEN) 00000000a0117000 - 00000000ab6b9000 (reserved) > (XEN) 00000000ab6b9000 - 00000000ab865000 type 20 > (XEN) 00000000ab865000 - 00000000af3fc000 (usable) > (XEN) 00000000af3fc000 - 00000000af42e000 (reserved) > (XEN) 00000000af42e000 - 00000000af800000 (usable) > (XEN) 00000000af800000 - 00000000d0000000 (reserved) > (XEN) 00000000fd000000 - 00000000fe800000 (reserved) > (XEN) 00000000fed20000 - 00000000fed45000 (reserved) > (XEN) 00000000ff000000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000840000000 (usable) > (XEN) New Xen image base address: 0xaec00000 > (XEN) ACPI Error (tbxfroot-0217): A valid RSDP was not found [20070126] Here's the reason Xen only sees one pcpu: It can't find the ACPI table which tells it everything else about the system. Jan / Boris, any ideas here? Sorry, John seems to have top-posted the `xl dmesg` information; his original description of his system setup and problem is further below. -George > (XEN) System RAM: 32308MB (33083612kB) > (XEN) Domain heap initialised > (XEN) Found and enabled local APIC! > (XEN) Not enabling x2APIC: depends on iommu_supports_eim. > (XEN) xstate: size: 0xa88 and states: 0x2ff > (XEN) CMCI: threshold 0x2 too large for CPU0 bank 6, using 0x1 > (XEN) CMCI: threshold 0x2 too large for CPU0 bank 9, using 0x1 > (XEN) CMCI: threshold 0x2 too large for CPU0 bank 10, using 0x1 > (XEN) CMCI: threshold 0x2 too large for CPU0 bank 11, using 0x1 > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Platform timer is 1.193MHz PIT > (XEN) Detected 2095.087 MHz processor. > (XEN) Initing memory sharing. > (XEN) I/O virtualisation disabled > (XEN) Enabled directed EOI with ioapic_ack_old on! > (XEN) Allocated console ring of 16 KiB. > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Extended Page Tables (EPT) > (XEN) - Virtual-Processor Identifiers (VPID) > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) - Unrestricted Guest > (XEN) - APIC Register Virtualization > (XEN) - Virtual Interrupt Delivery > (XEN) - Posted Interrupt Processing > (XEN) - VMCS shadowing > (XEN) - VM Functions > (XEN) - Virtualisation Exceptions > (XEN) - Page Modification Logging > (XEN) - TSC Scaling > (XEN) HVM: ASIDs enabled. > (XEN) HVM: VMX enabled > (XEN) HVM: Hardware Assisted Paging (HAP) detected > (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB > (XEN) Brought up 1 CPUs > (XEN) Dom0 has maximum 208 PIRQs > (XEN) ACPI is disabled, notifying Domain 0 (acpi=off) > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2955000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000820000000->0000000824000000 (1020569 > pages to be allocated) > (XEN) Init. ramdisk: 000000083d299000->000000083fffff40 > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff82955000 > (XEN) Init. ramdisk: 0000000000000000->0000000000000000 > (XEN) Phys-Mach map: 0000008000000000->0000008000800000 > (XEN) Start info: ffffffff82955000->ffffffff829554b4 > (XEN) Page tables: ffffffff82956000->ffffffff8296f000 > (XEN) Boot stack: ffffffff8296f000->ffffffff82970000 > (XEN) TOTAL: ffffffff80000000->ffffffff82c00000 > (XEN) ENTRY ADDRESS: ffffffff824a4180 > (XEN) Dom0 has maximum 2 VCPUs > (XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs > (XEN) > ........................................................................................................................................................................................................................................................................done. > (XEN) Initial low memory virq threshold set at 0x4000 pages. > (XEN) Std. Loglevel: Errors and warnings > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) > (XEN) Xen is relinquishing VGA console. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen) > (XEN) Freed 460kB init memory > (XEN) Platform timer appears to have unexpectedly wrapped 1 times. > > On Mon, Mar 5, 2018 at 4:21 PM, George Dunlap <dunlapg@xxxxxxxxx> wrote: >> On Sat, Mar 3, 2018 at 11:19 AM, John Naggets <hostingnuggets@xxxxxxxxx> >> wrote: >>> Hello, >>> >>> I am running Xen 4.9.0 on Ubuntu 17.10 on a new Lenovo ThinkSystem >>> SR630 server and have noticed that Xen reports only one CPU available. >>> Is this normal? or is something wrong in my setup? >> >> No, that's distinctly not normal. Assuming your ThinkSystem server has >> more than one logical cpu of course. :-) >> >> Would you mind attaching the output of `xl dmesg` as well? >> >> Thanks, >> -George >> >>> >>> Here is the output of "xl info": >>> >>> release : 4.13.0-32-generic >>> version : #35-Ubuntu SMP Thu Jan 25 09:13:46 UTC 2018 >>> machine : x86_64 >>> nr_cpus : 1 >>> max_cpu_id : 0 >>> nr_nodes : 1 >>> cores_per_socket : 1 >>> threads_per_core : 1 >>> cpu_mhz : 2095 >>> hw_caps : >>> bfebfbff:77fef3f7:2c100800:00000121:0000000f:d19ffffb:00000008:00000100 >>> virt_caps : hvm >>> total_memory : 32308 >>> free_memory : 15534 >>> sharing_freed_memory : 0 >>> sharing_used_memory : 0 >>> outstanding_claims : 0 >>> free_cpus : 0 >>> xen_major : 4 >>> xen_minor : 9 >>> xen_extra : .0 >>> xen_version : 4.9.0 >>> xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 >>> hvm-3.0-x86_32p hvm-3.0-x86_64 >>> xen_scheduler : credit >>> xen_pagesize : 4096 >>> platform_params : virt_start=0xffff800000000000 >>> xen_changeset : >>> xen_commandline : placeholder dom0_mem=4G,max:4G >>> dom0_max_vcpus=2 dom0_vcpus_pin no-real-mode edd=off >>> cc_compiler : gcc (Ubuntu 7.2.0-8ubuntu2) 7.2.0 >>> cc_compile_by : stefan.bader >>> cc_compile_domain : canonical.com >>> cc_compile_date : Fri Oct 13 15:58:41 UTC 2017 >>> build_id : 889e50dffcb9ab064c376b1278be0a259e95dd43 >>> xend_config_format : 4 >>> >>> See under nr_cpus only "1" is available. Also have a look at the >>> output of "xl vcpu-list" where I have VM1 with 4 vCPUs and VM2 with 1 >>> vCPU: >>> >>> Name ID VCPU CPU State Time(s) >>> Affinity (Hard / Soft) >>> Domain-0 0 0 0 r-- 125665.8 all / all >>> Domain-0 0 1 - --p 0.0 all / all >>> vm2.somefancydomaintest.co 10 0 0 -b- 17377.2 all / all >>> vm1.somefancydomaintest.co 11 0 0 -b- 617.9 all / all >>> vm1.somefancydomaintest.co 11 1 0 -b- 630.7 all / all >>> vm1.somefancydomaintest.co 11 2 0 -b- 1065.0 all / all >>> vm1.somefancydomaintest.co 11 3 0 -b- 590.2 all / all >>> >>> Finally here is the output of "lscpu": >>> >>> Architecture: x86_64 >>> CPU op-mode(s): 32-bit, 64-bit >>> Byte Order: Little Endian >>> CPU(s): 1 >>> On-line CPU(s) list: 0 >>> Thread(s) per core: 1 >>> Core(s) per socket: 1 >>> Socket(s): 1 >>> NUMA node(s): 1 >>> Vendor ID: GenuineIntel >>> CPU family: 6 >>> Model: 85 >>> Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz >>> Stepping: 4 >>> CPU MHz: 2095.140 >>> BogoMIPS: 4190.17 >>> Hypervisor vendor: Xen >>> Virtualization type: none >>> L1d cache: 32K >>> L1i cache: 32K >>> L2 cache: 1024K >>> L3 cache: 11264K >>> NUMA node0 CPU(s): 0 >>> Flags: fpu de tsc msr pae mce cx8 apic sep mca cmov pat >>> clflush acpi mmx fxsr sse sse2 ss ht syscall nx lm constant_tsc >>> rep_good nopl nonstop_tsc cpuid pni pclmulqdq est ssse3 fma cx16 >>> sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor >>> lahf_lm abm 3dnowprefetch intel_ppin fsgsbase bmi1 hle avx2 bmi2 erms >>> rtm avx512f avx512dq rdseed adx clflushopt clwb avx512cd avx512bw >>> avx512vl xsaveopt xsavec xgetbv1 >>> >>> Here I should be seeing 2 CPUs as I am using the "dom0_max_vcpus=2 >>> kernel parameter but the output only shows 1. >>> >>> Any ideas what could be wrong in my setup? or is this normal? I have >>> the feeling my whole dom0 and domUs are running on a single core... >>> >>> Best regards, >>> John >>> >>> _______________________________________________ >>> Xen-users mailing list >>> Xen-users@xxxxxxxxxxxxxxxxxxxx >>> https://lists.xenproject.org/mailman/listinfo/xen-users > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxxx > https://lists.xenproject.org/mailman/listinfo/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |