[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] DomU not starting under pvhv2



Hi.

Running Xen 4.10.0

A VM is not starting with type = 'pvh'. The VM starts, but exits prior to any data being read off the domU disk image.

The same VMs works if the type is changed to 'pv'.

Other VMs on other hosts (with the exact same setup) work with pvh fine.

The main difference between hosts where type=pvh does not work and ones where it does is that the pvh does not work on older CPUs:
 Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz
 Intel(R) Xeon(R) CPU           E3110  @ 3.00GHz
 Intel(R) Xeon(R) CPU           E5310  @ 1.60GHz
 Intel(R) Xeon(R) CPU           E5320  @ 1.86GHz
 Intel(R) Xeon(R) CPU           E5420  @ 2.50GHz
 Intel(R) Xeon(R) CPU           X3220  @ 2.40GHz


Newer CPUs seem to be fine (start VMs with type = pvh):
 Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
 Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
 Intel(R) Xeon(R) CPU E3-1230 v3 @ 3.30GHz
 Intel(R) Xeon(R) CPU E3-1231 v3 @ 3.40GHz
 Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz
 Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
 Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz
 Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz
 Intel(R) Xeon(R) CPU E5-2630 v2 @ 2.60GHz
 Intel(R) Xeon(R) CPU           E5506  @ 2.13GHz
 Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz
 Intel(R) Xeon(R) CPU           E5620  @ 2.40GHz
 Intel(R) Xeon(R) CPU           E5645  @ 2.40GHz
 Intel(R) Xeon(R) CPU           X3440  @ 2.53GHz

Dom0 command line is: dom0_max_vcpus=2 dom0_vcpus_pin loglvl=info vcpu_migration_delay=1000

I see (all?) the older CPUs don't have VT-d. However some of the CPUs where pvh is working do not report hvm_directio in xl info virt_caps (e.g. the E5506 servers) though they do have VT-d available per ark.intel.com.

And ideas on what may be stopping type=pvh VMs starting on those hosts? And how we could get it working?

Else we'll likely be dumping some hardware....

I did a diff of xl info; xl dmesg and xl create startup messages. Between one of the non-pvh-able hosts (the - line) and a host where pvh works (the + line):
diff host of xl -v create and xlinfo:
-hw_caps : bfebfbff:0004e3bd:20100800:00000001:00000000:00000000:00000000:00000000
-virt_caps              : hvm
+hw_caps : bfebfbff:009ee3fd:2c100800:00000001:00000000:00000000:00000000:00000100
+virt_caps              : hvm hvm_directio

+libxl: detail: libxl_dom.c:204:numa_place_domain: NUMA placement candidate with 1 nodes, 8 cpus and 16819 KB free selected

- (XEN) Enabling APIC mode:  Flat.  Using 2 I/O APICs
+ (XEN) Enabling APIC mode:  Phys.  Using 2 I/O APICs

- (XEN) I/O virtualisation disabled
+ (XEN) Intel VT-d Snoop Control enabled.
+ (XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
+ (XEN) Intel VT-d Queued Invalidation enabled.
+ (XEN) Intel VT-d Interrupt Remapping enabled.
+ (XEN) Intel VT-d Posted Interrupt not enabled.
+ (XEN) Intel VT-d Shared EPT tables not enabled.
+ (XEN) I/O virtualisation enabled

-(XEN)  -> Using new ACK method
+(XEN)  -> Using old ACK method

  (XEN) VMX: Supported advanced features:
+ (XEN)  - APIC MMIO access virtualisation
+ (XEN)  - Extended Page Tables (EPT)
+ (XEN)  - Virtual-Processor Identifiers (VPID)
+ (XEN)  - Virtual NMI
+ (XEN)  - Unrestricted Guest


-(XEN) HVM: Hardware Assisted Paging (HAP) not detected
+(XEN) HVM: Hardware Assisted Paging (HAP) detected

+(XEN) Found masked UR signaling on 0000:00:00.0
+(XEN) Masked UR signaling on 0000:00:01.0
+(XEN) Masked UR signaling on 0000:00:03.0
+(XEN) Masked UR signaling on 0000:00:05.0
+(XEN) Masked UR signaling on 0000:00:07.0
+(XEN) Masked VT-d error signaling on 0000:00:14.0


Regards, Peter

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.