(XEN) Bad console= option 'tty' Xen 4.4.3-12.el6 (XEN) Xen version 4.4.3-12.el6 (mockbuild@xxxxxxxxxx) (gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16)) debug=n Wed Feb 17 13:09:36 UTC 2016 (XEN) Latest ChangeSet: Wed Feb 17 12:38:38 2016 +0000 git:8978853-dirty (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: dom0_mem=1024M,max:1024M cpuinfo com1=115200,8n1 console=com1,tty loglvl=all guest_loglvl=all (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 3 MBR signatures (XEN) Found 3 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000e6000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000cff90000 (usable) (XEN) 00000000cff90000 - 00000000cff9e000 (ACPI data) (XEN) 00000000cff9e000 - 00000000cffe0000 (ACPI NVS) (XEN) 00000000cffe0000 - 00000000d0000000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 00000002b0000000 (usable) (XEN) ACPI: RSDP 000FAD70, 0014 (r0 ACPIAM) (XEN) ACPI: RSDT CFF90000, 003C (r1 7599MS A7599100 20090918 MSFT 97) (XEN) ACPI: FACP CFF90200, 0084 (r1 7599MS A7599100 20090918 MSFT 97) (XEN) ACPI Warning (tbfadt-0464): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20070126] (XEN) ACPI: DSDT CFF90450, 98AD (r1 A7599 A7599100 100 INTL 20051117) (XEN) ACPI: FACS CFF9E000, 0040 (XEN) ACPI: APIC CFF90390, 007C (r1 7599MS A7599100 20090918 MSFT 97) (XEN) ACPI: MCFG CFF90410, 003C (r1 7599MS OEMMCFG 20090918 MSFT 97) (XEN) ACPI: OEMB CFF9E040, 0072 (r1 7599MS A7599100 20090918 MSFT 97) (XEN) ACPI: HPET CFF99D00, 0038 (r1 7599MS OEMHPET 20090918 MSFT 97) (XEN) ACPI: SSDT CFF99D40, 088C (r1 A M I POWERNOW 1 AMD 1) (XEN) System RAM: 10239MB (10484924kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-00000002b0000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000ff780 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[cff9e00c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) (XEN) Processor #1 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) (XEN) Processor #2 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) (XEN) Processor #3 0:5 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8300 base: 0xfed00000 (XEN) ERST table was not found (XEN) Using ACPI (MADT) for SMP configuration information (XEN) SMP: Allowing 6 CPUs (2 hotplug CPUs) (XEN) IRQ limits: 24 GSI, 760 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2606.641 MHz processor. (XEN) Initing memory sharing. (XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 512K (64 bytes/line) (XEN) CPU 0(4) -> Processor 0, Core 0 (XEN) AMD Fam10h machine check reporting enabled (XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff (XEN) PCI: Not using MCFG for segment 0000 bus 00-ff (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) CPU0: AMD Athlon(tm) II X4 620 Processor stepping 02 (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET (XEN) Allocated console ring of 32 KiB. (XEN) HVM: ASIDs enabled. (XEN) SVM: Supported advanced features: (XEN) - Nested Page Tables (NPT) (XEN) - Last Branch Record (LBR) Virtualisation (XEN) - Next-RIP Saved on #VMEXIT (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging (HAP) detected (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB (XEN) HVM: PVH mode not supported on this platform (XEN) Booting processor 1/1 eip 8f000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 512K (64 bytes/line) (XEN) CPU 1(4) -> Processor 0, Core 1 (XEN) CPU1: AMD Athlon(tm) II X4 620 Processor stepping 02 (XEN) microcode: CPU1 collect_cpu_info: patch_id=0x1000086 (XEN) Booting processor 2/2 eip 8f000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 512K (64 bytes/line) (XEN) CPU 2(4) -> Processor 0, Core 2 (XEN) CPU2: AMD Athlon(tm) II X4 620 Processor stepping 02 (XEN) microcode: CPU2 collect_cpu_info: patch_id=0x1000086 (XEN) Booting processor 3/3 eip 8f000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 512K (64 bytes/line) (XEN) CPU 3(4) -> Processor 0, Core 3 (XEN) CPU3: AMD Athlon(tm) II X4 620 Processor stepping 02 (XEN) Brought up 4 CPUs (XEN) microcode: CPU3 collect_cpu_info: patch_id=0x1000086 (XEN) HPET: 3 timers usable for broadcast (4 total) (XEN) ACPI sleep modes: S3 (XEN) MCA: Use hw thresholding to adjust polling frequency (XEN) mcheck_poll: Machine check polling timer started. (XEN) Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2382000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000029c000000->00000002a0000000 (225652 pages to be allocated) (XEN) Init. ramdisk: 00000002ab174000->00000002affff800 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff82382000 (XEN) Init. ramdisk: 0000000000000000->0000000000000000 (XEN) Phys-Mach map: ffffffff82382000->ffffffff82582000 (XEN) Start info: ffffffff82582000->ffffffff825824b4 (XEN) Page tables: ffffffff82583000->ffffffff8259a000 (XEN) Boot stack: ffffffff8259a000->ffffffff8259b000 (XEN) TOTAL: ffffffff80000000->ffffffff82800000 (XEN) ENTRY ADDRESS: ffffffff81d761f0 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: ...........................................................................................done. (XEN) Initial low memory virq threshold set at 0x4000 pages. (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 280kB init memory. (XEN) traps.c:2524:d0 Domain attempted WRMSR 00000000c0010004 from 0x0000000000000000 to 0x000000000000ffff. (XEN) PCI add device 0000:00:00.0 (XEN) PCI add device 0000:00:02.0 (XEN) PCI add device 0000:00:06.0 (XEN) PCI add device 0000:00:11.0 (XEN) PCI add device 0000:00:12.0 (XEN) PCI add device 0000:00:12.1 (XEN) PCI add device 0000:00:12.2 (XEN) PCI add device 0000:00:13.0 (XEN) PCI add device 0000:00:13.1 (XEN) PCI add device 0000:00:13.2 (XEN) PCI add device 0000:00:14.0 (XEN) PCI add device 0000:00:14.1 (XEN) PCI add device 0000:00:14.2 (XEN) PCI add device 0000:00:14.3 (XEN) PCI add device 0000:00:14.4 (XEN) PCI add device 0000:00:14.5 (XEN) PCI add device 0000:00:18.0 (XEN) PCI add device 0000:00:18.1 (XEN) PCI add device 0000:00:18.2 (XEN) PCI add device 0000:00:18.3 (XEN) PCI add device 0000:00:18.4 (XEN) PCI add device 0000:01:00.0 (XEN) PCI add device 0000:02:00.0 (XEN) PCI: Using MCFG for segment 0000 bus 00-ff (d1) HVM Loader (d1) Detected Xen v4.4.3-12.el6 (d1) Xenbus rings @0xfeffc000, event channel 4 (d1) System requested SeaBIOS (d1) CPU speed is 2607 MHz (d1) Relocating guest memory for lowmem MMIO space disabled (XEN) irq.c:270: Dom1 PCI link 0 changed 0 -> 5 (d1) PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:270: Dom1 PCI link 1 changed 0 -> 10 (d1) PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:270: Dom1 PCI link 2 changed 0 -> 11 (d1) PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:270: Dom1 PCI link 3 changed 0 -> 5 (d1) PCI-ISA link 3 routed to IRQ5 (d1) pci dev 01:2 INTD->IRQ5 (d1) pci dev 01:3 INTA->IRQ10 (d1) pci dev 02:0 INTA->IRQ11 (d1) pci dev 03:0 INTA->IRQ5 (d1) pci dev 05:0 INTA->IRQ10 (d1) RAM in high memory; setting high_mem resource base to 10f800000 (d1) pci dev 04:0 bar 10 size 002000000: 0f0000008 (d1) pci dev 02:0 bar 14 size 001000000: 0f2000008 (d1) pci dev 05:0 bar 30 size 000040000: 0f3000000 (d1) pci dev 05:0 bar 10 size 000020000: 0f3040000 (d1) pci dev 04:0 bar 30 size 000010000: 0f3060000 (d1) pci dev 04:0 bar 14 size 000001000: 0f3070000 (d1) pci dev 02:0 bar 10 size 000000100: 00000c001 (d1) pci dev 03:0 bar 10 size 000000100: 00000c101 (d1) pci dev 05:0 bar 14 size 000000040: 00000c201 (d1) pci dev 01:2 bar 20 size 000000020: 00000c241 (d1) pci dev 01:1 bar 20 size 000000010: 00000c261 (d1) Multiprocessor initialisation: (d1) - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done. (d1) - CPU1 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... done. (d1) Testing HVM environment: (d1) - REP INSB across page boundaries ... passed (d1) - GS base MSRs and SWAPGS ... passed (d1) Passed 2 of 2 tests (d1) Writing SMBIOS tables ... (d1) Loading SeaBIOS ... (d1) Creating MP tables ... (d1) Loading ACPI ... (d1) vm86 TSS at fc00a080 (d1) BIOS map: (d1) 10000-100d3: Scratch space (d1) c0000-fffff: Main BIOS (d1) E820 table: (d1) [00]: 00000000:00000000 - 00000000:000a0000: RAM (d1) HOLE: 00000000:000a0000 - 00000000:000c0000 (d1) [01]: 00000000:000c0000 - 00000000:00100000: RESERVED (d1) [02]: 00000000:00100000 - 00000000:f0000000: RAM (d1) HOLE: 00000000:f0000000 - 00000000:fc000000 (d1) [03]: 00000000:fc000000 - 00000001:00000000: RESERVED (d1) [04]: 00000001:00000000 - 00000001:0f800000: RAM (d1) Invoking SeaBIOS ... (d1) SeaBIOS (version ?-20150729_130445-c1bg.rdu2.centos.org) (d1) (d1) Found Xen hypervisor signature at 40000000 (d1) Running on QEMU (i440fx) (d1) xen: copy e820... (d1) Relocating init from 0x000dd250 to 0xeffadca0 (size 74400) (d1) CPU Mhz=2607 (d1) Found 9 PCI devices (max PCI bus is 00) (d1) Allocated Xen hypercall page at effff000 (d1) Detected Xen v4.4.3-12.el6 (d1) xen: copy BIOS tables... (d1) Copying SMBIOS entry point from 0x00010010 to 0x000f5e50 (d1) Copying MPTABLE from 0xfc001160/fc001170 to 0x000f5d50 (d1) Copying PIR from 0x00010030 to 0x000f5cd0 (d1) Copying ACPI RSDP from 0x000100b0 to 0x000f5ca0 (d1) Using pmtimer, ioport 0xb008 (d1) Scan for VGA option rom (d1) WARNING! Found unaligned PCI rom (vd=1013:00b8) (d1) Running option rom at c000:0003 (XEN) stdvga.c:147:d1 entering stdvga and caching modes (d1) Turning on vga text mode console (d1) SeaBIOS (version ?-20150729_130445-c1bg.rdu2.centos.org) (d1) Machine UUID fec8c7ca-4b06-d1fd-d997-79df0f2e5f79 (d1) UHCI init on dev 00:01.2 (io=c240) (d1) Found 0 lpt ports (d1) Found 1 serial ports (d1) ATA controller 1 at 1f0/3f4/0 (irq 14 dev 9) (d1) ATA controller 2 at 170/374/0 (irq 15 dev 9) (d1) ata0-0: QEMU HARDDISK ATA-7 Hard-Disk (15362 MiBytes) (d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@0/disk@0 (d1) DVD/CD [ata1-0: QEMU DVD-ROM ATAPI-4 DVD/CD] (d1) Searching bootorder for: /pci@i0cf8/*@1,1/drive@1/disk@0 (d1) PS2 keyboard initialized (d1) All threads complete. (d1) Scan for option roms (d1) Running option rom at c900:0003 (d1) pmm call arg1=1 (d1) pmm call arg1=0 (d1) pmm call arg1=1 (d1) pmm call arg1=0 (d1) Searching bootorder for: /pci@i0cf8/*@5 (d1) (d1) Press F12 for boot menu. (d1) (d1) Searching bootorder for: HALT (d1) drive 0x000f5c50: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=31462528 (d1) Space available for UMB: ca000-ee000, f5670-f5bf0 (d1) Returned 258048 bytes of ZoneHigh (d1) e820 map has 7 items: (d1) 0: 0000000000000000 - 000000000009fc00 = 1 RAM (d1) 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED (d1) 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED (d1) 3: 0000000000100000 - 00000000effff000 = 1 RAM (d1) 4: 00000000effff000 - 00000000f0000000 = 2 RESERVED (d1) 5: 00000000fc000000 - 0000000100000000 = 2 RESERVED (d1) 6: 0000000100000000 - 000000010f800000 = 1 RAM (d1) enter handle_19: (d1) NULL (d1) Booting from Hard Disk... (d1) Booting from 0000:7c00 (XEN) stdvga.c:151:d1 leaving stdvga (XEN) stdvga.c:147:d1 entering stdvga and caching modes