[Xen-users] [xen-4.6-ARM][Renesas-Lager Board]All CPU didn't bring up

[ììí <charlescho64@xxxxxxxxx>]

Hello,Â

There are some issue during bring-up. one of them is "All CPU didn't bring up". The message for error is Âvery simple like below. Current only one CPU were brought up.

.................................................................................

Starting kernel ...

- UART enabled -

- CPU 00000000 booting -

- Xen starting in Hyp mode -

- Zero BSS -

- Setting up control registers -

- Turning on paging -

- Ready -

(XEN) Checking for initrd in /chosen

(XEN) RAM: 0000000040000000 - 000000007fffffff

(XEN) RAM: 0000000140000000 - 00000001ffffffff

(XEN)Â

(XEN) MODULE[0]: 00000000407f3000 - 00000000407fd000 Device Tree Â

(XEN) MODULE[1]: 0000000072000000 - 000000007225e890 Kernel   ÂÂ

(XEN) ÂRESVD[0]: 0000000070f00000 - 0000000070f0a000

(XEN) ÂRESVD[1]: 000000007ff9a000 - 000000007ff9a120

(XEN) ÂRESVD[2]: 00000000407f3000 - 00000000407fd000

(XEN)Â

(XEN) Command line: console=dtuart dom0_mem=1G

(XEN) Placing Xen at 0x000000007fc00000-0x000000007fe00000

(XEN) Update BOOTMOD_XEN from 0000000090000000-0000000090101701 => 000000007fc00000-000000007fd01701

(XEN) Xen heap: 00000001f8000000-0000000200000000 (32768 pages)

(XEN) Dom heap: 1015808 pages

(XEN) Domain heap initialised

(XEN) Platform: Renesas R-Car Gen2

(XEN) Taking dtuart configuration from /chosen/stdout-path

(XEN) Looking for dtuart at "/serial@e6e60000", options ""

ÂXen 4.6.0

(XEN) Xen version 4.6.0 (charles@) (arm-linux-gnueabihf-gcc (Linaro GCC 4.9-2015.01-3) 4.9.3 20150113 (prerelease)) debug=y Wed Oct 28 10:29:39 KS5

(XEN) Latest ChangeSet: Mon Oct 5 15:33:39 2015 +0100 git:b24ad7b

(XEN) Processor: 413fc0f2: "ARM Limited", variant: 0x3, part 0xc0f, rev 0x2

(XEN) 32-bit Execution:

(XEN) Â Processor Features: 00001131:00011011

(XEN) Â Â Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle

(XEN) Â Â Extensions: GenericTimer Security

(XEN) Â Debug Features: 02010555

(XEN) Â Auxiliary Features: 00000000

(XEN) Â Memory Model Features: 10201105 40000000 01240000 02102211

(XEN) ÂISA Features: 02101110 13112111 21232041 11112131 10011142 00000000

(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 10000 KHz

(XEN) GICv2 initialization:

(XEN) Â Â Â Â gic_dist_addr=00000000f1001000

(XEN) Â Â Â Â gic_cpu_addr=00000000f1002000

(XEN) Â Â Â Â gic_hyp_addr=00000000f1004000

(XEN) Â Â Â Â gic_vcpu_addr=00000000f1006000

(XEN) Â Â Â Â gic_maintenance_irq=25

(XEN) GICv2: 416 lines, 8 cpus, secure (IID 0200043b).

(XEN) Using scheduler: SMP Credit Scheduler (credit)

(XEN) Allocated console ring of 64 KiB.

(XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0

(XEN) Bringing up CPU1

(XEN) CPU1 never came online

(XEN) Failed to bring up CPU 1 (error -5)

(XEN) Bringing up CPU2

(XEN) CPU2 never came online

(XEN) Failed to bring up CPU 2 (error -5)

(XEN) Bringing up CPU3

(XEN) CPU3 never came online

(XEN) Failed to bring up CPU 3 (error -5)

(XEN) Bringing up CPU4

(XEN) CPU4 never came online

(XEN) Failed to bring up CPU 4 (error -5)

(XEN) Bringing up CPU5

(XEN) CPU5 never came online

(XEN) Failed to bring up CPU 5 (error -5)

(XEN) Bringing up CPU6

(XEN) CPU6 never came online

(XEN) Failed to bring up CPU 6 (error -5)

(XEN) Bringing up CPU7

(XEN) CPU7 never came online

(XEN) Failed to bring up CPU 7 (error -5)

(XEN) Brought up 1 CPUs

(XEN) P2M: 40-bit IPA

(XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558

(XEN) I/O virtualisation disabled

(XEN) *** LOADING DOMAIN 0 ***

(XEN) Loading kernel from boot module @ 0000000072000000

(XEN) Allocating 1:1 mappings totalling 1024MB for dom0:

(XEN) BANK[0] 0x00000048000000-0x00000070000000 (640MB)

(XEN) BANK[1] 0x000001d8000000-0x000001f0000000 (384MB)

(XEN) Grant table range: 0x0000007fc00000-0x0000007fc61000

(XEN) Loading zImage from 0000000072000000 to 000000004fc00000-000000004fe5e890

(XEN) Allocating PPI 16 for event channel interrupt

(XEN) Loading dom0 DTB to 0x0000000050000000-0x0000000050008b91

(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs

(XEN) ................................done.

(XEN) Initial low memory virq threshold set at 0x4000 pages.

(XEN) Std. Loglevel: All

(XEN) Guest Loglevel: All

(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)

(XEN) Freed 264kB init memory.

(XEN) do_physdev_op 16 cmd=25: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

(XEN) do_physdev_op 16 cmd=15: not implemented yet

.................................................................................

BR

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users