Hello,
We are testing the scripts provided by “Citrix Ready” on our hardware infrastructure, and when we execute the logical steps that are required, it finally fails.
We have tried it on different servers, ports and switch without success.
Our Hardware:
IBM servers: X3550M4 witch Emulex OneConnect Ethernet Network Adapter.
Brocade switch interconnection IBM 2498
IBM disk cabin Stormwize V7000
The script command is the following one:
./XenCert Lvmohba -b -m -u <full path> /XenCert/blockunblockhbapathsBrocade-fc-and-switch-ip: username: password: <port1>, <port2>
This maps a 10Gb HBA LUN target and destroys it, evidence for I/O error, tests the multipath config, switch off the ports of the interconnect brocade and switch on again, and repeats this operation 100 times, in our case until the 19 iteration, because it finally fails:
Good one:
Iteration 3:
-> Blocking paths (ip:user:password)
- Paths failover time: 29 seconds
- Maximum IO completion time: 27.7039 seconds. Data: 1MB. Throughput: 37.8 kB/s
PASS [Completed]
-> Unblocking paths, waiting for restoration.
PASS [Completed 1 seconds]
Bad one:
Iteration 19:
-> Blocking paths (ip:user:password)
FAIL [Thu May 28 18:16:35 2015]
- There was an exception while performing multipathing configuration tests.
Exception: - Paths did not failover within expected time.
FAIL [Thu May 28 18:16:45 2015]
Destroy the SR.
PASS [Completed]
We’ve checked everything (hardware, server logs). We need to send the succesful results to:
Citrix Ready Online Application
citrixready@xxxxxxxxxx
We would appreciate some help on this to make it work permanently
Thanks in advance.
Marc Poll
Technical Area – SWHosting
http://www.serveisweb.com
http://blog.serveisweb.com
http://www.ticketday.es
Tel. 902 010 664 - Tel. Int. +34 972 010 550
Fax 902 510 664 - Fax Int. +34 972 010 555
Please, consider the environment before printing this email.
LEGAL NOTICE
SW Hosting & Communications Technologies, SL informs you that this message is intended exclusively for its addressee and contains confidential and / or sensitive information subject to professional secrecy and protected by the current legislation. If you are not the intended recipient, we notify you that the reading, use, disclosure, reproduction, distribution, printing and / or copy of this communication, information and / or any attachments to it are strictly prohibited by law. If you have received this message by mistake, please notify it to us immediately replying to the sender of the message and then delete it with all the attachments if any.
