Re: [Xen-users] Windows "modern.ie" Network Problem

[Wanderson Camargo <wandersonwhcr@xxxxxxxxx>]

I don't remember which driver I installed, I tried a lot of them! Haha!

I'll try to convert and run the box again, without drivers.

But I have another boxes from modern.ie, clean, with the same problem.

Give me 1 hour, I'll check if it works.

--
Wanderson Henrique Camargo Rosa

http://www.wanderson.camargo.nom.br/

On Tue, Jan 20, 2015 at 9:48 AM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote:

On Tue, 2015-01-20 at 09:24 -0200, Wanderson Camargo wrote:
> I don't know why, but when I paste my source inside the forum editor,
> it prefix the mac with "1". My current vif configuration is:
>
>
> vif = [ 'mac=13:D3:93:36:40:37,bridge=xenbr0,type=ioemu' ]

OK, that's good thanks.

>
> Yesterday I found a typo, "bridge-ports" is "bridge_ports", with
> underscore. I change it, but it didn't fix my problem.

What does "brctl show" show?

> Verifying it, qemu opens a vif named "vif11.0-emu". But when I execute
> "ifconfig" after "xm create", there's not interface named like that.

You may need "ifconfig -a" to see it, if it isn't up. That would
indicate an issue with your hotplug scripts.

> We can see a lot of console errors. I'll find a way to disable it.

What are they? They might be interesting.

> Thinking about that, there's a way to check if my guest is configured
> with NAT instead of bridge?

(network-script network-bridge)
(vif-script vif-bridge)

means you are using bridged and not NAT. In any case I don't think this
will be related to the problem you are seeing.

Ah, I've just noticed that your qemu log shows:
> Unknown PV product 2 loaded in guest
> PV driver build 1

Which indicates you have some PV drivers in your guest, which ones are
they? In general these drivers will unplug the emulated path as part of
switching to the PV path, i.e. vifX.Y-emu will disappear (as you've
observed) leaving you with just vifX.Y, however "type=ioemu" requests
that there be no PV path created. Try removing "type=ioemu" from your
vif config and I think the PV path should work.

If for some reason you want to use emulation and not PV drivers, then
remove or disable the in guest drivers. You will almost always want to
use PV drivers though, emulation can be rather slow.

Ian.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users