> Depending on which behaviour you are after you should drop either
> EFI_DIR or EFI_VENDOR from your cfg I think. I think the intention is
> that people only normally specify EFI_VENDOR.
>
> Ian.
Ian,
Thank you I did not know that. I will add information as comment in PKGBUILD.
I had an error in a previous xen ver if I didn't put i the EFI_VENDOR. I saw in docs that
EFI_DIR let you put the efi directly were it was to go. I will comment out EFI_VENDOR.
as soon as I get the PKGBUILD 100% stable then I will likely reformat so my /boot is FAT32
so that the kernels will be updates properly. My current test box is setup with
sda1 as fat32, sda2 & xen-dom0 as ext4. I am booting off of /boot/efi/EFI/arch_grub
so when I had things wrong and xen.efi failed it fell back to grub2 and booted xen.
# lsblk
sda 8:0 0 477G 0 disk
sda1 8:1 0 512M 0 part /boot/efi
sda2 8:2 0 244M 0 part /boot
sda3 8:3 0 476.2G 0 part
xen-dom0 254:0 0 28.2G 0 lvm /
xen-win8 254:1 0 100G 0 lvm
sdb 8:16 1 29.8G 0 disk
sdb1 8:17 1 29.8G 0 part
sr0 11:0 1 3.1G 0 rom
The xen.conf had all of these in it. Is there something in my parameters(below) that is
also causing all these to be populated?
#xen-evtchn builtin kernel
#xen-gntdev builtin kernel
# xen-gntalloc builtin kernel
xen-blkback
#xen-netback builtin kernel
#xen-pciback builtin kernel
#evtchn no module
#gntdev no module
#netbk no module
#blkbk no module
#xen-scsibk no module
#usbbk no module
#pciback no module
xen-acpi-processor
#blktap2 no module
#blktap no module
> The report states "/run/run/xenstored"? Please tell how you did
> run "configure".
>
> Olaf
All,
Since what you all talked about I am really hoping I configured something incorrectly here as in the EFI_VENDOR case.
My bad sorry I didn't think that most probably aren't familiar with Arch on top of which I didn't point that I was trying to make
an arch package so the parameters. compile configuration, the dependencies etc were in the attached PKGBUILD.
Here are the parameters
export xen_export_check="true"
export AS86=/usr/bin/as86
export BASH=/usr/bin/bash
export BCC=/usr/bin/bcc
export BISON=/usr/bin/bison
export CMAKE=/usr/bin/cmake
export COMPILER_PATH=/usr/bin
export CURL=/usr/bin/curl-config
export EFI_VENDOR=arch
export EFI_DIR=/boot/efi/EFI/arch_grub
export BOOT_DIR=/boot/
export FIG2DEV=/usr/bin/fig2dev
export FLEX=/usr/bin/flex
export IASL=/usr/bin/iasl
export LD86=/usr/bin/ld86
export LD_EFI=/usr/x86_64-w64-mingw32/bin/ld
export MARKDOWN=/usr/bin/markdown
export PANDOC=/usr/bin/pandoc
export PERL=/usr/bin/perl
export PKG_CONFIG=/usr/bin/pkg-config
export POD2HTML=/usr/bin/core_perl/pod2html
export POD2MAN=/usr/bin/core_perl/pod2man
export POD2TEXT=/usr/bin/core_perl/pod2text
export PYTHON="/usr/bin/python2"
export XML=/usr/bin/xml2-config
export XGETTEXT=/usr/bin/xgettext
# Things that should not be exported that will break this git build
#export ZLIB_URL="http://xenbits.xen.org/xen-extfiles/zlib-1.2.3.tar.gz"
#export LIBPCI_URL="http://xenbits.xen.org/xen-extfiles/pciutils-2.2.9.tar.bz2"
#export NEWLIB_URL="http://xenbits.xen.org/xen-extfiles/newlib-1.16.0.tar.gz"
#export LWIP_URL=" http://xenbits.xen.org/xen-extfiles/lwip-1.3.0.tar.gz"
#export GRUB_URL="http://xenbits.xen.org/xen-extfiles/grub-0.97.tar.gz"
#export OCAML_URL="http://caml.inria.fr/ocaml/pub/distrib/ocaml-4.02/ocaml-4.02.1.tar.gz"
#export GMP_URL="http://xenbits.xen.org/xen-extfiles/gmp-4.3.2.tar.bz2"
#export POLARSSL_URL="http://xenbits.xen.org/xen-extfiles/polarssl-1.1.4-gpl.tgz"
#export TPMEMU_URL="http://xenbits.xen.org/xen-extfiles/tpm_emulator-0.7.4.tar.gz"
msg2 "Starting make..."
./autogen.sh
./configure \
--prefix=/usr \
--libdir=/usr/lib/ \
--bindir=/usr/bin/ \
--sbindir=/usr/bin/ \
--enable-rpath \
--localstatedir=/run \
--with-sysconfig-leaf-dir="default" \
--with-system-ovmf="/usr/share/ovmf" \
--with-xenstored=oxenstored \
--enable-systemd \
--with-systemd="/usr/lib/systemd/system" \
--with-systemd-modules-load="/etc/modules-load.d" \
--enable-stubdom
# --with-initddir="/etc/xen/scripts" \
# --enable-blktap2 \
# --with-linux-backend-modules="xen-evtchn xen-gntdev xen-gntalloc xen-blkback xen-netback xen-pciback xen-acpi-processor"
# --enable-caml-stubdom
### need to check this -> --with-initddir="/etc/xen/scripts"
I manually created /run/lib/xenstored when I rebooted it was gone
I noticed for some reason in my email I cut the bottom off the error message so here
is the complete message plus some additional systemctl info
[root@archxen ~]# systemctl status var-lib-xenstored.mount
● var-lib-xenstored.mount - mount xenstore file system
Loaded: error (Reason: Invalid argument)
Active: inactive (dead)
Where: /run/lib/xenstored
What: xenstore
Jan 11 12:37:20 archxen systemd[1]: var-lib-xenstored.mount's Where= setting doesn't match unit name. Refusing.
Jan 11 12:37:20 archxen systemd[1]: var-lib-xenstored.mount's Where= setting doesn't match unit name. Refusing.
Jan 11 12:37:22 archxen systemd[1]: var-lib-xenstored.mount's Where= setting doesn't match unit name. Refusing.
[root@archxen ~]# systemctl status xenstored.service
● xenstored.service - The Xen xenstore
Loaded: loaded (/usr/lib/systemd/system/xenstored.service; disabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sun 2015-01-11 12:21:57 CST; 1min 57s ago
Process: 325 ExecStart=/bin/sh -c exec $XENSTORED --no-fork $XENSTORED_ARGS (code=exited, status=2)
Process: 322 ExecStartPre=/bin/mkdir -p /run/run/xen (code=exited, status=0/SUCCESS)
Process: 319 ExecStartPre=/bin/rm -f /run/lib/xenstored/tdb* (code=exited, status=0/SUCCESS)
Process: 311 ExecStartPre=/bin/grep -q control_d /proc/xen/capabilities (code=exited, status=0/SUCCESS)
Main PID: 325 (code=exited, status=2)
Status: "Mismatch on number (2): Invalid request descriptor"
Error: 53 (Invalid request descriptor)
Jan 11 12:21:57 archxen sh[325]: Expected 2 fds but given 1
Jan 11 12:21:57 archxen sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() mismatch")
Jan 11 12:21:57 archxen systemd[1]: xenstored.service: main process exited, code=exited, status=2/INVALIDARGUMENT
Jan 11 12:21:57 archxen systemd[1]: Failed to start The Xen xenstore.
Jan 11 12:21:57 archxen systemd[1]: Unit xenstored.service entered failed state.
Jan 11 12:21:57 archxen systemd[1]: xenstored.service failed.
journalctl _PID=325
-- Logs begin at Sat 2014-12-20 04:39:45 CST, end at Mon 2015-01-12 12:37:28 CST. --
Dec 25 18:57:51 localhost systemd-fsck[325]: /dev/sda2: clean, 354/62496 files, 78342/249856 blocks
-- Reboot --
Dec 26 13:39:36 localhost sh[325]: Expected 2 fds but given 1
Dec 26 13:39:36 localhost sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() mismatch")
-- Reboot --
Dec 26 14:22:54 localhost dhcpcd[325]: version 6.6.7 starting
Dec 26 14:22:54 localhost dhcpcd[325]: enp5s0: adding address fe80::42d8:d41e:f5f5:d2e9
Dec 26 14:22:54 localhost dhcpcd[325]: enp5s0: waiting for carrier
Dec 26 14:22:57 localhost dhcpcd[325]: enp5s0: carrier acquired
Dec 26 14:22:57 localhost dhcpcd[325]: DUID 00:01:00:01:1c:28:0e:72:d0:50:99:27:72:4e
Dec 26 14:22:57 localhost dhcpcd[325]: enp5s0: IAID 99:27:72:45
Dec 26 14:22:57 localhost dhcpcd[325]: enp5s0: rebinding lease of 192.168.1.234
Dec 26 14:22:58 localhost dhcpcd[325]: enp5s0: soliciting an IPv6 router
Dec 26 14:23:02 localhost dhcpcd[325]: enp5s0: leased 192.168.1.234 for 86400 seconds
Dec 26 14:23:02 localhost dhcpcd[325]: enp5s0: adding route to 192.168.1.0/24
Dec 26 14:23:02 localhost dhcpcd[325]: enp5s0: adding default route via 192.168.1.1
Dec 26 14:23:02 localhost dhcpcd[325]: forked to background, child pid 494
-- Reboot --
Jan 09 17:53:49 archxen sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() failed to get any sockets"
-- Reboot --
Jan 11 11:35:55 archxen sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() failed to get any sockets"
-- Reboot --
Jan 11 12:15:02 archxen sh[325]: Expected 2 fds but given 1
Jan 11 12:15:02 archxen sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() mismatch")
-- Reboot --
Jan 11 12:21:57 archxen sh[325]: Expected 2 fds but given 1
Jan 11 12:21:57 archxen sh[325]: Fatal error: exception Failure("ocaml_sd_listen_fds() mismatch")
