[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] substantial shutdown delay for PV guests with PCI -passthrough
Hi list,I am experiencing a substantial delay if I shutdown a PV linux guest which has PCI devices passed-through: I start the domain using xl create -c domain Then I login from the connected console and do a shutdown -h nowwhich results in normal shutdown messages (w/o errors) showing on the console screen. The last line of messages then reads: [ 36.535466] reboot: System haltedSo all seems normal and as expected; the strange thing, however, is that the prompt in dom0 only returns after a substantial amount of time which appears to be _proportional_ to the number of PCI devices passed through: For every device specified in the pci = [ bb:dd.f, ... ]entry in the guest configuration file the delay is 10 seconds. In other words for 4 PCI devices passed through, it takes 40 seconds before the prompt in dom0 returns (though I did not make any test with more than 4 devices). If I issue the command xl listfrom an other terminal connected to dom0 while the delay is on-going it shows that the domain in question remains in the state 's', which according to the man page indicates that "the guest OS has shut down (SCHEDOP_shutdown has been called) but the domain is not dying yet". This state does not change until the prompt in dom0 returns (at least repeated 'xl list' commands show the same output) and then the line for the domain is gone. If no devices are passed through, the prompt in dom0 after having shut down the domU appears without any noticeable delay. All tests have been performed using the same environment while only changing the relevant line in the domU configuration file. The xen version used is 4.3.1-r5, xen-tools is also 4.3.1-r5 and the kernel used for both dom0 and domUs is 3.11.7 (hardende gentoo sources). The system is capable of vt-d and uses a Xeon E3-1260L processor.Do these observations ring a bell with anybody or is this even expected behaviour. If this is not normal - which I would expect as I have not been able to find any information relating to substantial delays during shutdown - how would I go about getting to the grounds of this? Thanks and regards Atom2 _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |