Re: [Xen-users] XEN 4.3 sxp options ip, netmask, gateway no more available ?

[Giovanni Bellac <giovannib1979@xxxxxxxxx>]

Hello Ian,

yes, this is from a console output of the domU, when starting with "ip", "netmask" and "gateway" parameters in the sxp file.

Here is a complete "dmesg" output of a domU running on XEN 4.0.

The "Command line" line is interesting:

[    0.000000] Command line: root=/dev/xvda1 ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXX:eth0:off

Kind regards
Giovanni






root@vsrv70428:~# cat dmesg.txt
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.101 (root@backer64) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Mon Dec 30 13:15:49 CET 2013
[    0.000000] Command line: root=/dev/xvda1 ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXX:eth0:off
[    0.000000] ACPI in unprivileged domain disabled
[    0.000000] released 0 pages of unused memory
[    0.000000] Set 0 page(s) to 1-1 mapping.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 0000000200800000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x200800 max_arch_pfn = 0x400000000
[    0.000000] last_pfn = 0x100000 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 02858000
[    0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-0000000100000000
[    0.000000]  0000000000 - 0100000000 page 4k
[    0.000000] kernel direct mapping tables up to 0xffffffff @ [mem 0x007fb000-0x00ffffff]
[    0.000000] xen: setting RW the range fdc000 - 1000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000200800000
[    0.000000]  0100000000 - 0200800000 page 4k
[    0.000000] kernel direct mapping tables up to 0x2007fffff @ [mem 0xff7f6000-0xffffffff]
[    0.000000] xen: setting RW the range fffff000 - 100000000
[    0.000000] NUMA turned off
[    0.000000] Faking a node at 0000000000000000-0000000200800000
[    0.000000] Initmem setup node 0 0000000000000000-0000000200800000
[    0.000000]   NODE_DATA [00000001ffffb000 - 00000001ffffffff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00200800
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x00200800
[    0.000000] On node 0 totalpages: 2099088
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2022 pages reserved
[    0.000000]   DMA zone: 1906 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 1030200 pages, LIFO batch:31
[    0.000000]   Normal zone: 14364 pages used for memmap
[    0.000000]   Normal zone: 1036260 pages, LIFO batch:31
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] PCI: Warning: Cannot find a gap in the 32bit address range
[    0.000000] PCI: Unassigned devices with 32bit resource registers may break!
[    0.000000] Allocating PCI resources starting at 200900000 (gap: 200900000:400000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.0.3 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801ffc00000 s79552 r8192 d22848 u524288
[    0.000000] pcpu-alloc: s79552 r8192 d22848 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2068366
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/xvda1 ip=213.160.XX.XX:127.0.255.255:213.160.XX.1:255.255.255.0:vsrv70428.XXXXX:eth0:off
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8148136k/8396800k available (13024k kernel code, 448k absent, 248216k reserved, 8399k data, 808k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:304 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [hvc0] enabled
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] Detected 2400.154 MHz processor.
[    0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.30 BogoMIPS (lpj=2400154)
[    0.000999] pid_max: default: 32768 minimum: 301
[    0.000999] Security Framework initialized
[    0.000999] SELinux:  Initializing.
[    0.000999] SELinux:  Starting in permissive mode
[    0.001915] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.004217] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004919] Mount-cache hash table entries: 256
[    0.005088] Initializing cgroup subsys cpuacct
[    0.005098] Initializing cgroup subsys devices
[    0.005103] Initializing cgroup subsys freezer
[    0.005107] Initializing cgroup subsys net_cls
[    0.005111] Initializing cgroup subsys blkio
[    0.005180] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.005181] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.005202] CPU: Physical Processor ID: 0
[    0.005206] CPU: Processor Core ID: 0
[    0.005311] SMP alternatives: switching to UP code
[    0.076491] Performance Events: unsupported p6 CPU model 44 no PMU driver, software events only.
[    0.076649] installing Xen timer for CPU 1
[    0.076679] SMP alternatives: switching to SMP code
[    0.145292] installing Xen timer for CPU 2
[    0.145452] installing Xen timer for CPU 3
[    0.145559] Brought up 4 CPUs
[    0.145605] devtmpfs: initialized
[    0.145605] xor: automatically using best checksumming function: generic_sse
[    0.150600]    generic_sse:  2656.000 MB/sec
[    0.150606] xor: using function: generic_sse (2656.000 MB/sec)
[    0.150623] Grant table initialized
[    0.170276] Time: 165:165:165  Date: 165/165/65
[    0.170321] NET: Registered protocol family 16
[    0.171432] PCI: setting up Xen PCI frontend stub
[    0.171439] PCI: pci_cache_line_size set to 64 bytes
[    0.190008] bio: create slab <bio-0> at 0
[    0.206499] raid6: int64x1   2261 MB/s
[    0.223529] raid6: int64x2   2910 MB/s
[    0.240547] raid6: int64x4   1964 MB/s
[    0.257585] raid6: int64x8   2039 MB/s
[    0.274653] raid6: sse2x1    5902 MB/s
[    0.291698] raid6: sse2x2    6894 MB/s
[    0.308712] raid6: sse2x4    7335 MB/s
[    0.308717] raid6: using algorithm sse2x4 (7335 MB/s)
[    0.308977] ACPI: Interpreter disabled.
[    0.308986] xen/balloon: Initialising balloon driver.
[    0.308986] last_pfn = 0x200800 max_arch_pfn = 0x400000000
[    0.310966] xen-balloon: Initialising balloon driver.
[    0.310989] vgaarb: loaded
[    0.311023] SCSI subsystem initialized
[    0.311023] libata version 3.00 loaded.
[    0.311023] usbcore: registered new interface driver usbfs
[    0.311023] usbcore: registered new interface driver hub
[    0.311968] usbcore: registered new device driver usb
[    0.311991] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.311991] PCI: System does not support PCI
[    0.311991] PCI: System does not support PCI
[    0.312004] cfg80211: Calling CRDA to update world regulatory domain
[    0.312124] NetLabel: Initializing
[    0.312129] NetLabel:  domain hash size = 128
[    0.312133] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.312145] NetLabel:  unlabeled traffic allowed by default
[    0.312159] Switching to clocksource xen
[    0.312159] Switched to NOHz mode on CPU #0
[    0.312224] Switched to NOHz mode on CPU #1
[    0.312296] Switched to NOHz mode on CPU #2
[    0.312308] Switched to NOHz mode on CPU #3
[    0.316881] pnp: PnP ACPI: disabled
[    0.321899] PCI: max bus depth: 0 pci_try_num: 1
[    0.321921] NET: Registered protocol family 2
[    0.322445] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.324691] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.326244] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.326397] TCP: Hash tables configured (established 524288 bind 65536)
[    0.326403] TCP reno registered
[    0.326442] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.326500] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.326599] NET: Registered protocol family 1
[    0.326701] RPC: Registered named UNIX socket transport module.
[    0.326707] RPC: Registered udp transport module.
[    0.326711] RPC: Registered tcp transport module.
[    0.326714] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.326721] PCI: CLS 0 bytes, default 64
[    0.326760] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.326767] Placing 64MB software IO TLB between ffff8800fb7f6000 - ffff8800ff7f6000
[    0.326773] software IO TLB at phys 0xfb7f6000 - 0xff7f6000
[    0.326872] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.328713] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x13
[    0.328732] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x13
[    0.328750] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x13
[    0.328765] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x13
[    0.328839] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[    0.329156] audit: initializing netlink socket (disabled)
[    0.329168] type=2000 audit(1390300158.090:1): initialized
[    0.357317] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.361374] VFS: Disk quotas dquot_6.5.2
[    0.361461] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.361812] DLM installed
[    0.362991] NTFS driver 2.1.30 [Flags: R/W].
[    0.363268] fuse init (API version 7.16)
[    0.363757] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.366079] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    0.392866] SGI XFS Quota Management subsystem
[    0.392877] OCFS2 1.5.0
[    0.393101] ocfs2: Registered cluster interface o2cb
[    0.393168] ocfs2: Registered cluster interface user
[    0.393174] OCFS2 DLMFS 1.5.0
[    0.393279] OCFS2 User DLM kernel interface loaded
[    0.393285] OCFS2 Node Manager 1.5.0
[    0.393400] OCFS2 DLM 1.5.0
[    0.393857] GFS2 installed
[    0.393867] msgmni has been set to 15914
[    0.393976] SELinux:  Registering netfilter hooks
[    0.394566] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.394607] io scheduler noop registered
[    0.394612] io scheduler deadline registered
[    0.394694] io scheduler cfq registered (default)
[    0.394898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.395180] Event-channel device installed.
[    0.395842] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.457386] Non-volatile memory driver v1.3
[    0.457392] Linux agpgart interface v0.103
[    0.457583] [drm] Initialized drm 1.1.0 20060810
[    0.457590] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[    0.459632] brd: module loaded
[    0.460674] loop: module loaded
[    0.460814] nbd: registered device at major 43
[    0.465569] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96)
[    0.465577] drbd: built-in
[    0.465580] drbd: registered as block device major 147
[    0.465584] drbd: minor_table @ 0xffff8801f6c91100
[    0.465848] Loading iSCSI transport class v2.0-870.
[    0.466415] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.466731] SCSI Media Changer driver v0.25
[    0.467322] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    0.467329] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.467391] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[    0.467397] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    0.467460] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2
[    0.467466] Copyright (c) 2007-2011 Intel Corporation.
[    0.467519] Intel(R) Virtual Function Network Driver - version 1.0.8-k0
[    0.467524] Copyright (c) 2009 - 2010 Intel Corporation.
[    0.467589] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.3.8-k2
[    0.467595] ixgbe: Copyright (c) 1999-2011 Intel Corporation.
[    0.467655] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.0.0-k2
[    0.467663] Copyright (c) 2009 - 2010 Intel Corporation.
[    0.467715] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    0.467721] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    0.468044] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    0.468051] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
[    0.468640] blkfront: xvda1: barrier or flush: disabled
[    0.469969] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    0.469975] Copyright (c) 2007 Atheros Corporation.
[    0.470037] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[    0.470042] tehuti: Options: hw_csum
[    0.470093] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.13
[    0.470147] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    0.470250] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI
[    0.470301] Brocade 10G Ethernet driver
[    0.470655] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
[    0.470707] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[    0.470712] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.470765] tlan: ThunderLAN driver v1.17
[    0.470815] tlan: 0 devices installed, PCI: 0  EISA: 0
[    0.471215] ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
[    0.592776] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
[    0.592817] Broadcom NetXtreme II 5771x 10Gigabit Ethernet Driver bnx2x 1.62.12-0 (2011/03/20)
[    0.592950] sky2: driver version 1.28
[    0.593655] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.18
[    0.593787] PPP generic driver version 2.4.2
[    0.593904] PPP Deflate Compression module registered
[    0.593910] PPP BSD Compression module registered
[    0.593915] Initialising Xen virtual ethernet driver.
[    0.595294] eql: Equalizer2002: Simon Janes (simon@xxxxxxx) and David S. Miller (davem@xxxxxxxxxx)
[    0.595581] tun: Universal TUN/TAP device driver, 1.6
[    0.595588] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.595868] vxge: Copyright(c) 2002-2010 Exar Corp.
[    0.595874] vxge: Driver version: 2.5.3.22640-k
[    0.595941] myri10ge: Version 1.5.2-1.459
[    0.596173] console [netcon0] enabled
[    0.596178] netconsole: network logging started
[    0.596182] QLogic/NetXen Network Driver v4.0.75
[    0.596298] Solarflare NET driver v3.1
[    0.596651] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.596658] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[    0.596721] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.596728] ohci_hcd: block sizes: ed 80 td 96
[    0.596787] uhci_hcd: USB Universal Host Controller Interface driver
[    0.596938] usbcore: registered new interface driver usblp
[    0.596947] Initializing USB Mass Storage driver...
[    0.597035] usbcore: registered new interface driver usb-storage
[    0.597042] USB Mass Storage support registered.
[    0.597114] usbcore: registered new interface driver libusual
[    0.597344] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.606875] i8042: No controller found
[    1.606986] mousedev: PS/2 mouse device common for all mice
[    1.647359] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.647433] rtc_cmos: probe of rtc_cmos failed with error -38
[    1.647611] md: linear personality registered for level -1
[    1.647618] md: raid0 personality registered for level 0
[    1.647622] md: raid1 personality registered for level 1
[    1.647627] md: raid10 personality registered for level 10
[    1.647631] md: raid6 personality registered for level 6
[    1.647634] md: raid5 personality registered for level 5
[    1.647638] md: raid4 personality registered for level 4
[    1.647643] md: multipath personality registered for level -4
[    1.647648] md: faulty personality registered for level -5
[    1.647885] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx
[    1.647963] device-mapper: multipath: version 1.3.0 loaded
[    1.647970] device-mapper: multipath round-robin: version 1.0.0 loaded
[    1.647975] device-mapper: multipath queue-length: version 0.1.0 loaded
[    1.647979] device-mapper: multipath service-time: version 0.2.0 loaded
[    1.648093] cpuidle: using governor ladder
[    1.648099] cpuidle: using governor menu
[    1.648102] EFI Variables Facility v0.08 2004-May-17
[    1.649120] usbcore: registered new interface driver usbhid
[    1.649127] usbhid: USB HID core driver
[    1.649608] ALSA device list:
[    1.649614]   No soundcards found.
[    1.649648] Netfilter messages via NETLINK v0.30.
[    1.649670] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.649965] ctnetlink v0.93: registering with nfnetlink.
[    1.650163] xt_time: kernel timezone is -0000
[    1.650171] ip_set: protocol 6
[    1.650187] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[    1.650215] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    1.650281] IPVS: Creating netns size=2056 id=0
[    1.650287] IPVS: ipvs loaded.
[    1.650291] IPVS: [rr] scheduler registered.
[    1.650295] IPVS: [wrr] scheduler registered.
[    1.650299] IPVS: [lc] scheduler registered.
[    1.650302] IPVS: [wlc] scheduler registered.
[    1.650311] IPVS: [lblc] scheduler registered.
[    1.650321] IPVS: [lblcr] scheduler registered.
[    1.650325] IPVS: [dh] scheduler registered.
[    1.650329] IPVS: [sh] scheduler registered.
[    1.650333] IPVS: [sed] scheduler registered.
[    1.650337] IPVS: [nq] scheduler registered.
[    1.650342] IPVS: ftp: loaded support on port[0] = 21
[    1.650346] IPVS: [sip] pe registered.
[    1.650569] IPv4 over IPv4 tunneling driver
[    1.650877] GRE over IPv4 demultiplexor driver
[    1.650883] GRE over IPv4 tunneling driver
[    1.651415] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.651460] arp_tables: (C) 2002 David S. Miller
[    1.651474] TCP cubic registered
[    1.651477] Initializing XFRM netlink socket
[    1.651760] NET: Registered protocol family 10
[    1.653337] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.653400] IPv6 over IPv4 tunneling driver
[    1.654673] NET: Registered protocol family 17
[    1.654685] NET: Registered protocol family 15
[    1.654729] Bridge firewalling registered
[    1.654735] Ebtables v2.0 registered
[    1.654767] L2TP core driver, V2.0
[    1.654771] 802.1Q VLAN Support v1.8
[    1.655121] sctp: Hash tables configured (established 65536 bind 65536)
[    1.655401] Registering the dns_resolver key type
[    1.655585] PM: Hibernation image not present or could not be loaded.
[    1.655595] registered taskstats version 1
[    1.655617] XENBUS: Device with no driver: device/console/0
[    1.655621]   Magic number: 1:252:3141
[    1.667063] IP-Config: Complete:
[    1.667072]      device=eth0, addr=213.160.XX.XX, mask=255.255.255.0, gw=213.160.XX.XX,
[    1.667084]      host=vsrv70428, domain=, nis-domain=XXXXX
[    1.667094]      bootserver=127.0.255.255, rootserver=127.0.255.255, rootpath=
[    1.667162] md: Waiting for all devices to be available before autodetect
[    1.667168] md: If you don't use raid, use raid=noautodetect
[    1.667362] md: Autodetecting RAID arrays.
[    1.667367] md: Scanned 0 and added 0 devices.
[    1.667371] md: autorun ...
[    1.667373] md: ... autorun DONE.
[    1.687595] EXT3-fs: barriers not enabled
[    1.687789] kjournald starting.  Commit interval 5 seconds
[    1.687956] EXT3-fs (xvda1): using internal journal
[    1.687967] EXT3-fs (xvda1): mounted filesystem with writeback data mode
[    1.687984] VFS: Mounted root (ext3 filesystem) on device 202:1.
[    1.694482] devtmpfs: mounted
[    1.694805] Freeing unused kernel memory: 808k freed
[    1.694994] Write protecting the kernel read-only data: 20480k
[    1.702908] Freeing unused kernel memory: 1288k freed
[    1.703715] Freeing unused kernel memory: 1304k freed
[    1.999674] udev[1230]: starting version 164
[    3.042545] Adding 524284k swap on /swap.  Priority:-1 extents:133 across:541292k SS
[    4.078247] sshd (1850): /proc/1850/oom_adj is deprecated, please use /proc/1850/oom_score_adj instead.
[   11.970025] eth0: no IPv6 routers present

Ian Campbell <Ian.Campbell@xxxxxxxxxx> schrieb am 13:07 Dienstag, 28.Januar 2014:

On Tue, 2014-01-28 at 11:59 +0000, Giovanni Bellac wrote:
> The "ip", "netmask" and "gateway" options in the domU sxp file are
> forwarding the options to the kernel of the domU when starting:
>
> Output of console when starting the domU with "-c" (console):
> ...
> [    1.667063] IP-Config: Complete:
> [    1.667072]      device=eth0, addr=213.160.XX.XX, mask=255.255.255.0, gw=213.160.XX.XX,
> [    1.667084]      host=vsrv70428, domain=, nis-domain=XXXXX.tld,
> [    1.667094]      bootserver=127.0.255.255, rootserver=127.0.255.255, rootpath=
> ...

This is the domU console? I wonder if perhaps this stuff is causing
things to get added to the guest command line -- can you post a full
guest dmesg please?

Ian.



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users