# -*- sh -*-
#
# Xend configuration file.
#
# This example configuration is appropriate for an
installation that
# utilizes a bridged network configuration. Access to
xend via http
# is disabled.
# Commented out entries show the default for that entry,
unless otherwise
# specified.
#(logfile /var/log/xend.log)
#(loglevel DEBUG)
#(xend-http-server no)
(xend-unix-server yes)
#(xend-tcp-xmlrpc-server no)
#(xend-unix-xmlrpc-server yes)
#(xend-relocation-server no)
(xend-relocation-server yes)
#(xend-unix-path /var/lib/xend/xend-socket)
# Port xend should use for the HTTP interface, if
xend-http-server is set.
#(xend-port 8000)
# Port xend should use for the relocation interface, if
xend-relocation-server
# is set.
#(xend-relocation-port 8002)
# Address xend should listen on for HTTP connections, if
xend-http-server is
# set.
# Specifying 'localhost' prevents remote connections.
# Specifying the empty string '' (the default) allows all
connections.
#(xend-address '')
#(xend-address localhost)
# Address xend should listen on for relocation-socket
connections, if
# xend-relocation-server is set.
# Meaning and default as for xend-address above.
#(xend-relocation-address '')
# The hosts allowed to talk to the relocation port. If
this is empty (the
# default), then all connections are allowed (assuming
that the connection
# arrives on a port and interface on which we are
listening; see
# xend-relocation-port and xend-relocation-address
above). Otherwise, this
# should be a space-separated sequence of regular
expressions. Any host with
# a fully-qualified domain name or an IP address that
matches one of these
# regular expressions will be accepted.
#
# For example:
# (xend-relocation-hosts-allow '^localhost$
^.*\.example\.org$')
#
#(xend-relocation-hosts-allow '')
(xend-relocation-hosts-allow '')
# The limit (in kilobytes) on the size of the console
buffer
#(console-limit 1024)
##
# To bridge network traffic, like this:
#
# dom0: fake eth0 -> vif0.0 -+
# |
# bridge -> real eth0 ->
the network
# |
# domU: fake eth0 -> vifN.0 -+
#
# use
#
#(network-script network-bridge)
#
# Your default ethernet device is used as the outgoing
interface, by default.
# To use a different one (e.g. eth1) use
#
#(network-script 'network-bridge netdev=eth0')
#
# The bridge is named xenbr0, by default. To rename the
bridge, use
#
(network-script 'network-bridge bridge=br-xen0')
#
# It is possible to use the network-bridge script in more
complicated
# scenarios, such as having two outgoing interfaces, with
two bridges, and
# two fake interfaces per guest domain. To do things
like this, write
# yourself a wrapper script, and call network-bridge from
it, as appropriate.
#
(network-script network-bridge)
# The script used to control virtual interfaces. This
can be overridden on a
# per-vif basis when creating a domain or a configuring a
new vif. The
# vif-bridge script is designed for use with the
network-bridge script, or
# similar configurations.
#
# If you have overridden the bridge name using
# (network-script 'network-bridge bridge=<name>')
then you may wish to do the
# same here. The bridge name can also be set when
creating a domain or
# configuring a new vif, but a value specified here would
act as a default.
#
# If you are using only one bridge, the vif-bridge script
will discover that,
# so there is no need to specify it explicitly.
#
(vif-script vif-bridge)
## Use the following if network traffic is routed, as an
alternative to the
# settings for bridged networking given above.
#(network-script network-route)
#(vif-script vif-route)
## Use the following if network traffic is routed with
NAT, as an alternative
# to the settings for bridged networking given above.
#(network-script network-nat)
#(vif-script vif-nat)
# Dom0 will balloon out when needed to free memory for
domU.
# dom0-min-mem is the lowest memory level (in MB) dom0
will get down to.
# If dom0-min-mem=0, dom0 will never balloon out.
(dom0-min-mem 196)
# In SMP system, dom0 will use dom0-cpus # of CPUS
# If dom0-cpus = 0, dom0 will take all cpus available
(dom0-cpus 0)
# Whether to enable core-dumps when domains crash.
#(enable-dump no)
