Re: [Xen-users] HVM DomU+Dom0 crash with PCI USB passthrough

[Gordan Bobic <gordan@xxxxxxxxxx>]

On Wed, 31 Jul 2013 10:24:34 -0500, David Sutton <kantras@xxxxxxxxx> 
wrote:
> On Wed, Jul 31, 2013 at 9:17 AM, Gordan Bobic  wrote:
>
>  What may be relevant is that I get the following message when I 
> issue
>  "xl create xenwin.cfg":
>  libxl: error: libxl_pci.c:990:libxl__device_pci_reset: The kernel
>  doesn't support reset from sysfs for PCI device 0000:00:12.0
>
>  This isn't necessarily a problem - I see this reported for all
>  my passthrough GPUs. It seems to be mostly harmless.
>
> For reference, I also get that same error message on my install - 
> From
> running lspci on my main system:
>
> 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
>  00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI]
> SB7x0/SB8x0/SB9x0 USB EHCI Controller
>
> This is the USB controller I pass through to a Windows 7 domU, and
> it's been working fine (for the most part; on rare occasions, my kvm
> isn't detected correctly, but then I just replug it in and it works)
>
> One other thing you may want to try is to try using the traditional
> mode device model; add the following into your domU config:
>
> device_model_version = "qemu-xen-traditional"
Yes, forgot to mention that, I am only using traditional at the
moment, which may or may not make any difference.

Gordan

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users