|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] FW: RE: How to change VM from para-virtualization to full-virtualization?
Forwarding to Alexandre....
Regards,
Jerry ECN: (887) 17175 Phone: +86 10 6439 4175 This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer ______________________________________________
From: Jing Chen
Sent: Thursday, November 08, 2012 2:14 PM
To: xen-users-bounces@xxxxxxxxxxxxx
Cc: Jerry Gao
Subject: RE: [Xen-users] How to change VM from para-virtualization to full-virtualization?
Hello Alexandre.
This is Jing and I work with Jerry for this issue. I saw your email and do some test following your instruction. As our case, I met lots of issues since there are lots of track as you said. I list them here and need your help to check.
Seems it is a little bit longger. But your help is grateful.
I create a PV for DomU and install the SUSE linux 11 SP2. my configurations are as below.
1) partition.
 2) /etc/fstab file
 3) /boot/grub/menu.lst
 in PV, grub has been installed. The option 0 is the one work normally in PV. I add the second option for HVM.
4) the conf file in Dom0 is as below.
 To chagne PV to HVM. I do the following modification.
5) change conf file in Dom0
 6) change /etc/fstab as below
 7) change /etc/mtab as below
 Then. I start up the HVM using xm create command. And the error is as below.
 I try to change root parameter in menu.lst, such as "root=/dev/hda2". But it still can not startup saying can not mount /dev/hda2 to root.
Please give your advise what can I do.
Thanks very much.
Jing Chen
CBC/XIB/K
No.5 Lize East Street, Chaoyang District
100102, Beijing, China
Phone +86 10 84767586
Mobile +86 13801223973
jing.chen@xxxxxxxxxxxx
This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer
-----Original Message-----
From: Jerry Gao
Sent: Monday, November 05, 2012 4:28 PM
To: Jing Chen
Subject: FW: [Xen-users] How to change VM from para-virtualization to full-virtualization?
Regards,
Jerry
ECN: (887) 17175
Phone: +86 10 6439 4175
This Communication is Confidential. We only send and receive email on the basis of the terms set out at www.ericsson.com/email_disclaimer
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxx] On Behalf Of Alexandre Kouznetsov
Sent: Friday, November 02, 2012 1:22 AM
To: xen-users@xxxxxxxxxxxxx
Subject: Re: [Xen-users] How to change VM from para-virtualization to full-virtualization?
Hello.
El 31/10/12 18:54, Jerry Gao escribió:
> "3. Re-write your .cfg file within Dom0 to make it start the DomU as HVM."
> Which .cfg file are you referring to? Is there an example of it? Thanks.
HVM and PV guests needs different options in the config file. They share some basic variables, such as "name", "memory", etc, but, for example, "root" option has nothing to do in a config for HVM, and "builder" is not suitable for PV mode.
The PV configs I use are generated by Debian's xen-tools, and my HVM regular config has been copied from one place to another multiple times with minor changes, since I build it years ago.
As command reference, i have used this link back then:
A quick look around suggests this link as a good start to create own's HVM config:
(it is one of many, pick whatever you like)
> About the 4th step:
> "4. Install the boot loader into you DomU storage's MBR, watch the kernel command line for root= parameter. I would recommend doing this booting the HVM DomU with a LiveCD, Knoppix or systemrescuecd should do fine."
> Are you talking about to change the menu.list file of grub? Would you please help to give me more details about this step.
A common PV DomU have no grub or menu.lst at all. The bootloader's function (obtain and execute kernel, unpack initrd in DomU's memory) is handled by the hypervisor and controlled from scripts within Dom0. In some cases it's desirable to allow DomU to
control what kernel it shall boot, so a special tool "pygrub" is used: it is executed in Dom0, finds the DomU's disk image and extracts from it a minimalistic menu.lst file.
That menu.lst mentions a kernel and initrd images that are usually stored in the same disk image, so pygrub extracts them as well. If that is your case, you already have a menu.lst but need to make it usable by a normal Grub.
Recently I had to do something similar, I has do change the paths to the kernel and initrd files, and add parameters "root=/dev/hda2 ro" to the kernel line. Note that menu.lst config is used by legacy Grub, while
Grub2 (most commonly encountered this days) uses a completely different format and config filename.
In case of HVM, the boot loading process is more "normal", compared to a bare metal computer. Treat it as any other grub-enabled system. In case of Debian[-based] you might just use update-grub script and it will generate a nice config for you.
I mention Grub because it is the most common. Strictly speaking, lilo or syslinux would work well here as well, but you will find less reference about them, specially related to Xen.
> About the 5th step:
> "5. Modify your /etc/fstab to reflect the change of the block devices naming (from /dev/xvdaN to /dev/hda or whatever)."
> My previous VM is created on a virtual hard disk like /dev/drbd00. Then do I still need to change the storage device name?
Definitely yes.
Even if you pass /dev/drbd00 as is to HVM DomU, it will see it as /dev/hda or whatever you specified in your config file. Boot your DomU with a LiveCD and verify the correct device names.
Also take in account that the common baremetal installations does not put a FS directly on a block device. The block device are partitioned first. For sake of simplicity, Xen PV use to put FS directly on the
device: for example, /dev/xvda1 is not the first partition of xvda, instead it's whole device named xvda1, which shares nothing with xvda2.
If you use this approach within a HVM, you might confuse it, because it will expect to access FS on partitioned devices.
Another trick is, that legacy Grub can't read ext4 filesystem. Even better, it can't read ext3 filesystem if formatted with inode size of
256 bytes, which is the default for a modern mkfs.ext3. In my case, i had to use "mkfs.ext -I 128" in order to make it work with legacy Grub.
Grub2 does not have this problem.
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxx] On Behalf Of Alexandre
> Kouznetsov
> Sent: Wednesday, October 31, 2012 1:30 PM
> To: xen-users@xxxxxxxxxxxxx
> Subject: Re: [Xen-users] How to change VM from para-virtualization to full-virtualization?
>
> Hi.
>
> El 31/10/12 10:27, Jerry Gao escribió:
>> I've created a domU in para-virtualization. But now I need to change
>> it to full-virtualization.
>> Is it possible to upgrade/change the VM virtualization mode without
>> impact the OS+App in the VM? And How?
>
> Yes, it is possible. Can be a bit tricky because there are many details to take care of, even if each of this details is trivial by itself.
> From DomU's point of view, the change will affect the kernel used in the DomU, the boot loader and the storage devices naming.
>
> This is a small overview of what need to be done:
> 1. Make sure your DomU system has a regular kernel and a boot loader installed.
> 2. Make sure the storage is presented to the DomU as a partitioned block device(s).
> 3. Re-write your .cfg file within Dom0 to make it start the DomU as HVM.
> 4. Install the boot loader into you DomU storage's MBR, watch the kernel command line for root= parameter. I would recommend doing this booting the HVM DomU with a LiveCD, Knoppix or systemrescuecd should do fine.
> 5. Modify your /etc/fstab to reflect the change of the block devices naming (from /dev/xvdaN to /dev/hda or whatever).
>
> Word of advice, in many cases it's preferable to re-install the guest system, then move data and configs. This way you get a more predictable result.
>
> --
> Alexandre Kouznetsov
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxx
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxx
>
--
Alexandre Kouznetsov
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |