[Xen-users] Messages related libvirtd and bond

[Srija G <srijavg@xxxxxxxxx>]

Hi,

 

In one of our  xen server,  I am using two  bonding.  

 

                    bond0  :    Is for  trunk, where the vlans are attached ,  port eth0 & eth1  is attached to bond0

                    bond1  :    eth2 & eth3 are attached to bond1, where physical  ip has been set .

 

In the  /etc/xen/xend-config.sxp,  I am using  

(network-script multi-network-bridge)  , the  multi-network-bridge  is as follows:

 

 

[root@lnhst039 scripts]# cat multi-network-bridge
#!/bin/sh
#
vconfig set_name_type DEV_PLUS_VID_NO_PAD
dir=$(dirname "$0")
#-------------------------------------------------------------------------

 /etc/xen/scripts/network-bridge  $@ vifnum=1 bridge=xenbr2 netdev=bond0.12

 /etc/xen/scripts/network-bridge  $@ vifnum=2 bridge=xenbr3 netdev=bond0.13

 /etc/xen/scripts/network-bridge  $@ vifnum=3 bridge=xenbr4 netdev=bond0.14

 /etc/xen/scripts/network-bridge  $@ vifnum=5 bridge=xenbr1 netdev=bond1

#-------------------------------------------------------------------------

 

The  hypervisor is working fine  with  bond1,  and  all the guests  under  the vlan 12,13,14 are  goof  too.. But  I am getting  the following errors  in the messages file

 

libvirtd: 15:24:02.149: error : xenXMDomainConfigParse:1075 : internal error MAC address  xx:xx:xx:xx:xx:xx,bridge=xenbr1,script=vif-bridge too big for destination

 

What  I watched, that  these  messages are in every two minutes, when the cron  script     (python /usr/share/rhn/virtualization/poller.py)   is being executed.

 

It seems something is conflicting with bond1... If somebody can help me out for giving me some pointers , it will be really appreciated.

 

Thanks in advance

 

 

 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users