|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Crash on Debian6
> Some days ago I posted about random reboots of my freshly installed
> Xen4 on Debian 6, fully updated.
Tried Debian7, Xen 4.1, Linux 3.2.0, result:
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff808001e00100
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)
full console log follows.
Any idea?
thanks
(XEN) Bootloader: GRUB 1.99-22.1
(XEN) Command line: placeholder dom0_mem=512M dom0_max_vcpus=1 dom0_vcpus_pin lt
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 0000000000099c00 (usable)
(XEN) 0000000000099c00 - 00000000000a0000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bff66d40 (usable)
(XEN) 00000000bff66d40 - 00000000bff76300 (ACPI data)
(XEN) 00000000bff76300 - 00000000d0000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000440000000 (usable)
(XEN) ACPI: RSDP 000FDBD0, 0014 (r0 IBM )
(XEN) ACPI: RSDT BFF76280, 003C (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: FACP BFF76200, 0074 (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: DSDT BFF66D40, 2F27 (r1 IBM EXA01ZEU 1000 INTL 20041203)
(XEN) ACPI: FACS BFF75DC0, 0040
(XEN) ACPI: APIC BFF76080, 0142 (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: SRAT BFF75F00, 0180 (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: HPET BFF75EC0, 0038 (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: MCFG BFF75E00, 003C (r1 IBM EXA01ZEU 1000 IBM 45444F43)
(XEN) ACPI: SSDT BFF69C80, C116 (r1 IBM VIGSSDT0 1000 INTL 20041203)
(XEN) System RAM: 16382MB (16776188kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 36 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 37 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 38 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 39 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 16 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 17 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 18 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 19 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 52 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 53 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 54 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 55 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-c0000000
(XEN) SRAT: Node 0 PXM 0 100000000-440000000
(XEN) NUMA: Using 20 for the hash shift.
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 00099d40
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x9c
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[484,504], pm1x_evt[94,500]
(XEN) ACPI: wakeup_vec[bff75dcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) Switched to APIC driver `summit'.
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
(XEN) Processor #3 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x24] enabled)
(XEN) Processor #36 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x25] enabled)
(XEN) Processor #37 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x26] enabled)
(XEN) Processor #38 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x27] enabled)
(XEN) Processor #39 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
(XEN) Processor #16 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
(XEN) Processor #17 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
(XEN) Processor #18 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)
(XEN) Processor #19 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled)
(XEN) Processor #52 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x35] enabled)
(XEN) Processor #53 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x36] enabled)
(XEN) Processor #54 15:6 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x37] enabled)
(XEN) Processor #55 15:6 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
(XEN) ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 15, version 17, address 0xfec00000, GSI 0-35
(XEN) ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[36])
(XEN) IOAPIC[1]: apic_id 14, version 17, address 0xfec01000, GSI 36-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ8 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) Enabling APIC mode: Phys. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x10142001 base: 0xfd984000
(XEN) PCI: MCFG configuration 0: base c0000000 segment 0 buses 10 - 29
(XEN) PCI: MCFG area at c0a00000 reserved in E820
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 72 GSI, 3016 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3336.350 MHz processor.
(XEN) Initing memory sharing.
(XEN) traps.c:3060: GPF (0000): ffff82c480195ea7 -> ffff82c4802003c0
(XEN) mce_intel.c:1162: MCA Capability: BCAST 0 SER 0 CMCI 0 firstbank 0 extend8
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ... failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... works.
(XEN) Cyclone: Could not find valid CBAR value.
(XEN) Platform timer is 333.603MHz HPET
(XEN) Allocated console ring of 128 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - Virtual NMI
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Brought up 16 CPUs
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) CPUIDLE: disabled due to no HPET. Force enable with 'cpuidle'.
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x193c000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000042e000000->0000000430000000 (114968 pages to be al)
(XEN) Init. ramdisk: 000000043e118000->000000043ffff400
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff8193c000
(XEN) Init. ramdisk: ffffffff8193c000->ffffffff83823400
(XEN) Phys-Mach map: ffffffff83824000->ffffffff83924000
(XEN) Start info: ffffffff83924000->ffffffff839244b4
(XEN) Page tables: ffffffff83925000->ffffffff83946000
(XEN) Boot stack: ffffffff83946000->ffffffff83947000
(XEN) TOTAL: ffffffff80000000->ffffffff83c00000
(XEN) ENTRY ADDRESS: ffffffff816aa200
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: ......................................................
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xe)
(XEN) Freed 220kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-3-amd64 (Debian 3.2.21-3) (debian-kernel@lis2
[ 0.000000] Command line: placeholder root=/dev/mapper/VGmain-LVroot ro const
[ 0.000000] Freeing 99-100 pfn range: 103 pages freed
[ 0.000000] Released 103 pages of unused memory
[ 0.000000] Set 262401 page(s) to 1-1 mapping
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000000099000 (usable)
[ 0.000000] Xen: 0000000000099c00 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000bff66000 (usable)
[ 0.000000] Xen: 00000000bff66d40 - 00000000bff76300 (ACPI data)
[ 0.000000] Xen: 00000000bff76300 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001a009a000 (usable)
[ 0.000000] Xen: 00000001a009a000 - 0000000440000000 (unusable)
[ 0.000000] bootconsole [xenboot0] enabled
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:03.1
(XEN) PCI add device 00:03.2
(XEN) PCI add device 00:0f.0
(XEN) PCI add device 00:0f.1
(XEN) PCI add device 00:0f.3
(XEN) PCI add device 01:00.0
(XEN) PCI add device 01:01.0
(XEN) PCI add device 01:01.1
(XEN) PCI add device 01:02.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 06:00.0
(XEN) PCI add device 0a:00.0
(XEN) PCI add device 0f:00.0
(XEN) ----[ Xen-4.1.3-rc2-pre x86_64 debug=n Not tainted ]----
(XEN) CPU: 0
(XEN) RIP: e008:[<ffff82c4801fae3b>] pci_mmcfg_read+0xbb/0xf0
(XEN) RFLAGS: 0000000000010286 CONTEXT: hypervisor
(XEN) rax: ffff808000a00000 rbx: 0000000001400000 rcx: 000000000000000a
(XEN) rdx: ffff808001e00100 rsi: 0000000000000014 rdi: 0000000000000000
(XEN) rbp: 0000000000000004 rsp: ffff82c48027fd68 r8: ffff83043d32b460
(XEN) r9: ffff82c48027fda4 r10: ffff82c480207640 r11: 0000000000000286
(XEN) r12: 0000000000000000 r13: ffff82c48027fda4 r14: 0000000000000100
(XEN) r15: 0000000000000010 cr0: 000000008005003b cr4: 00000000000026f0
(XEN) cr3: 000000042f605000 cr2: ffff808001e00100
(XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e010 cs: e008
(XEN) Xen stack trace from rsp=ffff82c48027fd68:
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000014
(XEN) 0000000000000000 ffff82c4801fa732 000000000000000f 0000000000000000
(XEN) ffffffff81647240 ffff82c4801faf89 0000000000000014 0000000000000000
(XEN) 0000000000000000 0000000000000014 0000000000000000 ffffffff81647240
(XEN) ffff830414bf0140 ffff82c48013c81b ffff82c4802bb760 ffff83043d32b4d0
(XEN) ffff82c400000000 ffff82c4802210d1 ffff82c4802aa080 0000000000000296
(XEN) ffff82c400000000 fffffffffffffff2 000000000000000f ffff880014c8fc50
(XEN) ffff8300bff44000 ffffffff81647240 0000000000000000 ffff82c480171b60
(XEN) ffff83043d280200 ffff82c48029dd88 ffff83043d280200 ffff82c48027ff18
(XEN) 0000000000000000 ffff82c48015eb18 ffff83043d315d50 ffff82c480123438
(XEN) ffff83043d280014 0000000000000003 0000000000000000 ffff82c400000003
(XEN) ffff82c480298480 0000000000000200 0000000000000004 ffff8300bff44000
(XEN) 0000000000000000 0000000000000001 0000000000000000 ffffffff81647240
(XEN) 0000000000000000 ffff82c4801f5068 0000000000000000 ffffffff81647240
(XEN) 0000000000000000 0000000000000001 0000000000000000 ffff880014dcd090
(XEN) 0000000000000286 ffff880014dcd090 000000000000000f 0000000000000000
(XEN) 0000000000000021 ffffffff8100142a ffff880014dc6400 ffff880014c8fc50
(XEN) 000000000000000f 0000010000000000 ffffffff8100142a 000000000000e033
(XEN) 0000000000000286 ffff880014c8fc10 000000000000e02b 0000000000000000
(XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN) [<ffff82c4801fae3b>] pci_mmcfg_read+0xbb/0xf0
(XEN) [<ffff82c4801fa732>] pci_conf_read32+0x72/0x90
(XEN) [<ffff82c4801faf89>] pci_find_ext_capability+0x39/0xd0
(XEN) [<ffff82c48013c81b>] pci_add_device+0x26b/0x4a0
(XEN) [<ffff82c480171b60>] do_physdev_op+0x8d0/0x1410
(XEN) [<ffff82c48015eb18>] do_IRQ+0x278/0x5d0
(XEN) [<ffff82c480123438>] timer_softirq_action+0x148/0x220
(XEN) [<ffff82c4801f5068>] syscall_enter+0x88/0x8d
(XEN)
(XEN) Pagetable walk from ffff808001e00100:
(XEN) L4[0x101] = 000000043d32a063 5555555555555555
(XEN) L3[0x000] = 000000043d329063 5555555555555555
(XEN) L2[0x00f] = 0000000000000000 ffffffffffffffff
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) FATAL PAGE FAULT
(XEN) [error_code=0000]
(XEN) Faulting linear address: ffff808001e00100
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)
--
--
Lorenzo Milesi - lorenzo.milesi@xxxxxxxxxx
GPG/PGP Key-Id: 0xE704E230 - http://keyserver.linux.it
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |