Hey guys,
I have a problem on a domU "partdns01" which is actually acting as ntp/bind/dhcp server.
When i boot the domU the dhcpd deamon can’t start because of a too great time mismatch between him ans his failover peer.
For info, the dom0 name is "xendns01"
xendns01 ~ # hwclock
Tue Jun 12 14:22:46 2012 -0.000373 seconds
xendns01 ~ # ntpq -pn
remote refid st t when poll reach delay offset jitter
==============================================================================
*193.134.216.149 193.134.216.1 5 u 564 1024 377 0.428 -0.180 0.092
+193.134.216.148 193.134.216.1 5 u 366 1024 377 0.395 0.557 0.095
xendns01 ~ # date
Tue Jun 12 14:22:50 CEST 2012
xendns01 ~ # xm create partdns01 -c
Using config file "/etc/xen/partdns01".
Started domain partdns01 (id=130)
Linux version 2.6.20-xen-r6 (root@xendns01) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.2)) #15 SMP Mon Dec 8 15:36:37 CET 2008
Command line: root=/dev/sda1 ro
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
end_pfn_map = 67584
Zone PFN ranges:
DMA 0 -> 67584
DMA32 67584 -> 67584
Normal 67584 -> 67584
early_node_map[1] active PFN ranges
0: 0 -> 67584
No mptable found.
PERCPU: Allocating 24832 bytes of per cpu data
Built 1 zonelists. Total pages: 64700
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 8192 bytes)
Xen reported: 1596.082 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Software IO TLB disabled
Memory: 249824k/270336k available (3734k kernel code, 12012k reserved, 1844k data, 224k init)
Calibrating delay using timer specific routine.. 3195.28 BogoMIPS (lpj=6390577)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
Brought up 1 CPUs
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
TCP established hash table entries: 8192 (order: 5, 131072 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Failed to obtain physical IRQ 6
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
netconsole: not configured, aborting
Xen virtual console successfully installed as tty1
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
netfront: device eth0 has copying receive path.
netfront: device eth1 has copying receive path.
xen-vbd: registered block device major 8
blkfront: sda1: barriers enabled
blkfront: sda2: barriers enabled
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006
register_blkdev: cannot get major 8 for sd
Fusion MPT base driver 3.04.03
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.03
Fusion MPT SAS Host driver 3.04.03
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
Intel 810 + AC97 Audio, version 1.01, 15:35:23 Dec 8 2008
xenoprofile_init: ret 0, events 2, xenoprof_is_primary 0
IPv4 over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@xxxxxxxxxxxxxxx>
All bugs added by David S. Miller <davem@xxxxxxxxxx>
XENBUS: Device with no driver: device/console/0
ReiserFS: sda1: found reiserfs format "3.6" with standard journal
ReiserFS: sda1: using ordered data mode
ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda1: checking transaction log (sda1)
ReiserFS: sda1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
INIT: version 2.87 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2009 Gentoo Foundation; Distributed under the GPLv2
Press I to enter interactive boot mode
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev ... [ ok ]
* Starting udevd ...
[ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Waiting for uevents to be processed ...
[ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Checking root filesystem ...Reiserfs super block in block 16 on 0x801 of format 3.6 with standard journal
Blocks (total/free): 1572864/863352 by 4096 bytes
Filesystem is clean
Filesystem seems mounted read-only. Skipping journal replay.
Checking internal tree..finished
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possible) swap ... [ ok ]
* Setting system clock using the hardware clock [xen] ...
[ ok ]
* Configuring kernel parameters ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Wiping /tmp directory ... [ ok ]
* Device initiated services: net.eth0 net.eth1
* Setting hostname to partdns01 ...
[ ok ]
* Loading key mappings ... [ ok ]
* Setting user font ... [ ok ]
* Starting lo
* Bringing up lo
* 127.0.0.1/8
[ ok ]
* Adding routes
* 127.0.0.0/8 ... [ ok ]
* Starting eth0
* Bringing up eth0
* 10.194.1.25
[ ok ]
* Adding routes
* 10.194.0.0/16 via 10.194.1.1 ... [ ok ]
* Starting eth1
* Bringing up eth1
* 193.247.203.25
[ ok ]
* Adding routes
* 0.0.0.0/0 via 193.247.203.20 ... [ ok ]
* 193.247.203.0/24 via 193.247.203.17 ... [ ok ]
* Initializing random number generator ... [ ok ]
INIT: Entering runlevel: 3
* Starting syslog-ng ... [ ok ]
* Starting chrooted named ... [ ok ]
* Starting sshd ... [ ok ]
* Starting DenyHosts daemon ... [ ok ]
* Starting ntpd ... [ ok ]
* Starting dhcpd ... [ !! ]
* Mounting network filesystems ... [ ok ]
* Starting snmpd ... [ ok ]
* Starting portmap ... [ ok ]
* Starting Atempo Time Navigator ...Starting Time Navigator (tina)...
[ ok ]
* Starting Webmin ...Pre-loaded WebminCore
[ ok ]
* Starting local ... [ ok ]
This is partdns01.heig-vd.ch (Linux x86_64 2.6.20-xen-r6) 16:03:44
partdns01 ~ # tail -50 /var/log/messages |egrep -i "ntpd|dhcpd"
Jun 12 15:53:58 partdns01 ntpd[4304]: ntpd 4.2.6p3@xxxxxxxx Mon Jul 4 07:43:19 UTC 2011 (1)
Jun 12 15:53:58 partdns01 ntpd[4305]: proto: precision = 2.000 usec
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 1 lo 127.0.0.1 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 2 eth0 10.194.1.25 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 3 eth1 193.247.203.25 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: peers refreshed
Jun 12 15:53:58 partdns01 ntpd[4305]: Listening on routing socket on fd #20 for interface updates
Jun 12 15:53:59 partdns01 dhcpd: Wrote 722 leases to leases file.
Jun 12 15:53:59 partdns01 dhcpd:
Jun 12 15:53:59 partdns01 dhcpd: No subnet declaration for eth1 (193.247.203.25).
Jun 12 15:53:59 partdns01 dhcpd: ** Ignoring requests on eth1. If this is not what
Jun 12 15:53:59 partdns01 dhcpd: you want, please write a subnet declaration
Jun 12 15:53:59 partdns01 dhcpd: in your dhcpd.conf file for the network segment
Jun 12 15:53:59 partdns01 dhcpd: to which interface eth1 is attached. **
Jun 12 15:53:59 partdns01 dhcpd:
Jun 12 15:53:59 partdns01 dhcpd: failover peer dhcp-failover: I move from normal to startup
Jun 12 15:53:59 partdns01 dhcpd: Failover CONNECT to dhcp-failover rejected: Connection rejected, time mismatch too great.
Jun 12 15:53:59 partdns01 kernel: dhcpd[4370]: segfault at 0000000000000000 rip 00000000004188ba rsp 00007fffdbfdad80 error 4
partdns01 ~ # ntpq -pn
remote refid st t when poll reach delay offset jitter
==============================================================================
*193.134.216.1 130.59.36.150 4 u 29 64 7 1.113 -6.626 29.822
193.247.203.26 193.134.216.1 5 u 20 64 17 1.079 78.625 2.349
Once ntp is synchronized, i can manually start de dhcpd deamon.
partdns01 ~ # /etc/init.d/dhcpd start
* Starting dhcpd ... [ ok ]
partdns01 ~ # tail -100 /var/log/messages |egrep -i "ntpd|dhcpd"
Jun 12 15:53:58 partdns01 ntpd[4304]: ntpd 4.2.6p3@xxxxxxxx Mon Jul 4 07:43:19 UTC 2011 (1)
Jun 12 15:53:58 partdns01 ntpd[4305]: proto: precision = 2.000 usec
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 1 lo 127.0.0.1 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 2 eth0 10.194.1.25 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: Listen normally on 3 eth1 193.247.203.25 UDP 123
Jun 12 15:53:58 partdns01 ntpd[4305]: peers refreshed
Jun 12 15:53:58 partdns01 ntpd[4305]: Listening on routing socket on fd #20 for interface updates
Jun 12 15:53:59 partdns01 dhcpd: Wrote 722 leases to leases file.
Jun 12 15:53:59 partdns01 dhcpd:
Jun 12 15:53:59 partdns01 dhcpd: No subnet declaration for eth1 (193.247.203.25).
Jun 12 15:53:59 partdns01 dhcpd: ** Ignoring requests on eth1. If this is not what
Jun 12 15:53:59 partdns01 dhcpd: you want, please write a subnet declaration
Jun 12 15:53:59 partdns01 dhcpd: in your dhcpd.conf file for the network segment
Jun 12 15:53:59 partdns01 dhcpd: to which interface eth1 is attached. **
Jun 12 15:53:59 partdns01 dhcpd:
Jun 12 15:53:59 partdns01 dhcpd: failover peer dhcp-failover: I move from normal to startup
Jun 12 15:53:59 partdns01 dhcpd: Failover CONNECT to dhcp-failover rejected: Connection rejected, time mismatch too great.
Jun 12 15:53:59 partdns01 kernel: dhcpd[4370]: segfault at 0000000000000000 rip 00000000004188ba rsp 00007fffdbfdad80 error 4
Jun 12 16:09:59 partdns01 dhcpd: Wrote 722 leases to leases file.
Jun 12 16:09:59 partdns01 dhcpd:
Jun 12 16:09:59 partdns01 dhcpd: No subnet declaration for eth1 (xxx.xxx.xxx.xxx).
Jun 12 16:09:59 partdns01 dhcpd: ** Ignoring requests on eth1. If this is not what
Jun 12 16:09:59 partdns01 dhcpd: you want, please write a subnet declaration
Jun 12 16:09:59 partdns01 dhcpd: in your dhcpd.conf file for the network segment
Jun 12 16:09:59 partdns01 dhcpd: to which interface eth1 is attached. **
Jun 12 16:09:59 partdns01 dhcpd:
Jun 12 16:09:59 partdns01 dhcpd: failover peer dhcp-failover: I move from normal to startup
Jun 12 16:09:59 partdns01 dhcpd: failover peer dhcp-failover: peer moves from normal to communications-interrupted
Jun 12 16:09:59 partdns01 dhcpd: failover peer dhcp-failover: I move from startup to normal
Jun 12 16:09:59 partdns01 dhcpd: balanced pool 6a86a0 10.194.1.0/24 total 32 free 16 backup 16 lts 0 max-misbal 5
Jun 12 16:09:59 partdns01 dhcpd: Sending updates to dhcp-failover.
Jun 12 16:10:00 partdns01 dhcpd: failover peer dhcp-failover: peer moves from communications-interrupted to normal
Jun 12 16:10:00 partdns01 dhcpd: bind update on 10.194.6.55 from dhcp-failover rejected: 10.194.6.55: invalid state transition: active to expired
Jun 12 16:10:05 partdns01 dhcpd: DHCPREQUEST for 10.194.6.32 from 00:24:e8:33:21:b4 (toatoa) via eth0
Jun 12 16:10:05 partdns01 dhcpd: DHCPACK on 10.194.6.32 to 00:24:e8:33:21:b4 (toatoa) via eth0
I already did that trick but without any luck :
partdns01 ~ # tail -1 /etc/sysctl.conf
xen.independent_wallclock=1
partdns01 ~ # cat /proc/sys/xen/independent_wallclock
1
Same result with the follwing workaround :
partdns01 ~ # head -13 /etc/init.d/dhcpd
#!/sbin/runscript
# Copyright 1999-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-misc/dhcp/files/dhcpd.init,v 1.5 2007/04/02 12:34:01 uberlord Exp $
DHCPD_CONF=${DHCPD_CONF:-/etc/dhcp/dhcpd.conf}
depend() {
need net
need ntpd
sleep 60
use logger dns
}
Any clues ?
Best Regards,
Ludovic
