Hi,
I’m trying to boot a PV VM I just installed (following http://wiki.xen.org/wiki/Debian_Guest_Installation_Using_Debian_Installer) without success.
My XEN installation is xen-unstable 54c8c9eaee92+ on a Debian unstable machine (x86_64), kernel 3.3.4+. The VM I installed is, again, a Debian unstable x86_64. The installation went smoothly; I used an 8GB file as a disk back-end. I went for the simplest partition scheme (all in an ext3 partition).
Here’s the installation configuration file:
name = "debian-installer"
memory = 256
disk = ['file:/root/debian-blktap2.img,xvda,w']
kernel = "/root/netinst/vmlinuz"
ramdisk = "/root/netinst/initrd.gz"
extra = "debian-installer/exit/always_halt=true -- console=hvc0"
cpu_weight=256
vif=['bridge=xenbr0']
And here’s the configuration file used to boot the VM:
name = "debian"
memory = 256
disk = ['file:/root/debian-blktap2.img,xvda,w']
kernel = "/root/netinst/vmlinuz"
ramdisk = "/root/netinst/initrd.gz"
extra = "debian-installer/exit/always_halt=true -- console=hvc0"
cpu_weight=256
vif=['bridge=xenbr0']
root@dt07:~# cat debian-blktap2.cfg
name = "debian-installer"
memory = 256
disk = ['file:/root/debian-blktap2.img,xvda,w']
bootloader = "pygrub"
extra = "debian-installer/exit/always_halt=true -- console=hvc0"
cpu_weight=256
vif=['bridge=xenbr0']
When I try to boot the VM with the above configuration I get the following error:
Parsing config file debian-blktap2.cfg
libxl: debug: libxl_device.c:183:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=unknown
libxl: debug: libxl_device.c:137:disk_try_backend: Disk vdev=xvda, backend phy unsuitable as phys path not a block device
libxl: debug: libxl_device.c:144:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available
libxl: debug: libxl_device.c:219:libxl__device_disk_set_backend: Disk vdev=xvda, using backend qdisk
libxl: debug: libxl_device.c:183:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=qdisk
libxl: debug: libxl.c:1714:libxl_device_disk_local_attach: locally attaching qdisk /root/debian-blktap2.img
libxl: error: libxl_create.c:603:do_domain_create: failed to run bootloader: -3
xc: debug: hypercall buffer: total allocations:14 total releases:14
xc: debug: hypercall buffer: current allocations:0 maximum allocations:2
xc: debug: hypercall buffer: cache current size:2
xc: debug: hypercall buffer: cache hits:11 misses:2 toobig:1
When I try to see what goes wrong with pygrub (pygrub <image-file>), I get the following error:
Traceback (most recent call last):
File "/usr/local/bin/pygrub", line 822, in <module>
raise RuntimeError, "Unable to find partition containing kernel"
RuntimeError: Unable to find partition containing kernel
Does this mean that something went terribly wrong during the installation?
I mounted the disk image file with lomount, the partition table and file system in there seem to be fine. I then extract the kernel and ramdisk and try without pygrub:
# bootloader = "pygrub"
kernel = "vmlinuz-2.6.32-5-amd64"
ramdisk = "initrd.img-2.6.32-5-amd64"
This is the output of the new “xl create”:
Parsing config file debian-blktap2.cfg
libxl: debug: libxl_device.c:183:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=unknown
libxl: debug: libxl_device.c:137:disk_try_backend: Disk vdev=xvda, backend phy unsuitable as phys path not a block device
libxl: debug: libxl_device.c:144:disk_try_backend: Disk vdev=xvda, backend tap unsuitable because blktap not available
libxl: debug: libxl_device.c:219:libxl__device_disk_set_backend: Disk vdev=xvda, using backend qdisk
domainbuilder: detail: xc_dom_allocate: cmdline="debian-installer/exit/always_halt=true -- console=hvc0", features="(null)"
domainbuilder: detail: xc_dom_kernel_file: filename="vmlinuz-2.6.32-5-amd64"
domainbuilder: detail: xc_dom_malloc_filemap : 2367 kB
domainbuilder: detail: xc_dom_ramdisk_file: filename="initrd.img-2.6.32-5-amd64"
domainbuilder: detail: xc_dom_malloc_filemap : 9075 kB
domainbuilder: detail: xc_dom_boot_xen_init: ver 4.2, caps xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
domainbuilder: detail: xc_dom_parse_image: called
domainbuilder: detail: xc_dom_find_loader: trying multiboot-binary loader ...
domainbuilder: detail: loader probe failed
domainbuilder: detail: xc_dom_find_loader: trying Linux bzImage loader ...
domainbuilder: detail: xc_dom_malloc : 11914 kB
domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x2485c8 -> 0xba2b00
domainbuilder: detail: loader probe OK
xc: detail: elf_parse_binary: phdr: paddr=0x1000000 memsz=0x42d000
xc: detail: elf_parse_binary: phdr: paddr=0x142d000 memsz=0xd6150
xc: detail: elf_parse_binary: phdr: paddr=0x1504000 memsz=0x888
xc: detail: elf_parse_binary: phdr: paddr=0x1505000 memsz=0x160d8
xc: detail: elf_parse_binary: phdr: paddr=0x151c000 memsz=0x1de000
xc: detail: elf_parse_binary: memory: 0x1000000 -> 0x16fa000
xc: detail: elf_xen_parse_note: GUEST_OS = "linux"
xc: detail: elf_xen_parse_note: GUEST_VERSION = "2.6"
xc: detail: elf_xen_parse_note: XEN_VERSION = "xen-3.0"
xc: detail: elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
xc: detail: elf_xen_parse_note: ENTRY = 0xffffffff8151c200
xc: detail: elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
xc: detail: elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
xc: detail: elf_xen_parse_note: PAE_MODE = "yes"
xc: detail: elf_xen_parse_note: LOADER = "generic"
xc: detail: elf_xen_parse_note: unknown xen elf note (0xd)
xc: detail: elf_xen_parse_note: SUSPEND_CANCEL = 0x1
xc: detail: elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
xc: detail: elf_xen_parse_note: PADDR_OFFSET = 0x0
xc: detail: elf_xen_addr_calc_check: addresses:
xc: detail: virt_base = 0xffffffff80000000
xc: detail: elf_paddr_offset = 0x0
xc: detail: virt_offset = 0xffffffff80000000
xc: detail: virt_kstart = 0xffffffff81000000
xc: detail: virt_kend = 0xffffffff816fa000
xc: detail: virt_entry = 0xffffffff8151c200
xc: detail: p2m_base = 0xffffffffffffffff
domainbuilder: detail: xc_dom_parse_elf_kernel: xen-3.0-x86_64: 0xffffffff81000000 -> 0xffffffff816fa000
domainbuilder: detail: xc_dom_mem_init: mem 256 MB, pages 0x10000 pages, 4k each
domainbuilder: detail: xc_dom_mem_init: 0x10000 pages
domainbuilder: detail: xc_dom_boot_mem_init: called
domainbuilder: detail: x86_compat: guest xen-3.0-x86_64, address size 64
domainbuilder: detail: xc_dom_malloc : 512 kB
domainbuilder: detail: xc_dom_build_image: called
domainbuilder: detail: xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff816fa000 (pfn 0x1000 + 0x6fa pages)
domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0x6fa at 0x7f3a5921f000
xc: detail: elf_load_binary: phdr 0 at 0x0x7f3a5921f000 -> 0x0x7f3a5964c000
xc: detail: elf_load_binary: phdr 1 at 0x0x7f3a5964c000 -> 0x0x7f3a59722150
xc: detail: elf_load_binary: phdr 2 at 0x0x7f3a59723000 -> 0x0x7f3a59723888
xc: detail: elf_load_binary: phdr 3 at 0x0x7f3a59724000 -> 0x0x7f3a5973a0d8
xc: detail: elf_load_binary: phdr 4 at 0x0x7f3a5973b000 -> 0x0x7f3a597c1000
domainbuilder: detail: xc_dom_alloc_segment: ramdisk : 0xffffffff816fa000 -> 0xffffffff83117000 (pfn 0x16fa + 0x1a1d pages)
domainbuilder: detail: xc_dom_malloc : 156 kB
domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x16fa+0x1a1d at 0x7f3a57802000
domainbuilder: detail: xc_dom_do_gunzip: unzip ok, 0x8dcc4c -> 0x1a1c010
domainbuilder: detail: xc_dom_alloc_segment: phys2mach : 0xffffffff83117000 -> 0xffffffff83197000 (pfn 0x3117 + 0x80 pages)
domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x3117+0x80 at 0x7f3a5cd6f000
domainbuilder: detail: xc_dom_alloc_page : start info : 0xffffffff83197000 (pfn 0x3197)
domainbuilder: detail: xc_dom_alloc_page : xenstore : 0xffffffff83198000 (pfn 0x3198)
domainbuilder: detail: xc_dom_alloc_page : console : 0xffffffff83199000 (pfn 0x3199)
domainbuilder: detail: nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s)
domainbuilder: detail: nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s)
domainbuilder: detail: nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s)
domainbuilder: detail: nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffff833fffff, 26 table(s)
domainbuilder: detail: xc_dom_alloc_segment: page tables : 0xffffffff8319a000 -> 0xffffffff831b7000 (pfn 0x319a + 0x1d pages)
domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x319a+0x1d at 0x7f3a5cd52000
domainbuilder: detail: xc_dom_alloc_page : boot stack : 0xffffffff831b7000 (pfn 0x31b7)
domainbuilder: detail: xc_dom_build_image : virt_alloc_end : 0xffffffff831b8000
domainbuilder: detail: xc_dom_build_image : virt_pgtab_end : 0xffffffff83400000
domainbuilder: detail: xc_dom_boot_image: called
domainbuilder: detail: arch_setup_bootearly: doing nothing
domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_64 <= matches
domainbuilder: detail: xc_dom_compat_check: supported guest type: xen-3.0-x86_32p
domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32
domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_32p
domainbuilder: detail: xc_dom_compat_check: supported guest type: hvm-3.0-x86_64
domainbuilder: detail: xc_dom_update_guest_p2m: dst 64bit, pages 0x10000
domainbuilder: detail: clear_page: pfn 0x3199, mfn 0x2125d8
domainbuilder: detail: clear_page: pfn 0x3198, mfn 0x2125d9
domainbuilder: detail: xc_dom_pfn_to_ptr: domU mapping: pfn 0x3197+0x1 at 0x7f3a5ce80000
domainbuilder: detail: start_info_x86_64: called
domainbuilder: detail: setup_hypercall_page: vaddr=0xffffffff81009000 pfn=0x1009
domainbuilder: detail: domain builder memory footprint
domainbuilder: detail: allocated
domainbuilder: detail: malloc : 12631 kB
domainbuilder: detail: anon mmap : 0 bytes
domainbuilder: detail: mapped
domainbuilder: detail: file mmap : 11442 kB
domainbuilder: detail: domU mmap : 33 MB
domainbuilder: detail: arch_setup_bootlate: shared_info: pfn 0x0, mfn 0x95b9e
domainbuilder: detail: shared_info_x86_64: called
domainbuilder: detail: vcpu_x86_64: called
domainbuilder: detail: vcpu_x86_64: cr3: pfn 0x319a mfn 0x2125d7
domainbuilder: detail: launch_vm: called, ctxt=0x7fffdec2f5b0
domainbuilder: detail: xc_dom_release: called
libxl: debug: libxl_device.c:183:libxl__device_disk_set_backend: Disk vdev=xvda spec.backend=qdisk
libxl: debug: libxl_dm.c:996:libxl__create_device_model: Spawning device-model /usr/lib/xen/bin/qemu-system-i386 with arguments:
libxl: debug: libxl_dm.c:998:libxl__create_device_model: /usr/lib/xen/bin/qemu-system-i386
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -xen-domid
libxl: debug: libxl_dm.c:998:libxl__create_device_model: 24
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -chardev
libxl: debug: libxl_dm.c:998:libxl__create_device_model: socket,id=libxl-cmd,path=/var/run/xen/qmp-libxl-24,server,nowait
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -mon
libxl: debug: libxl_dm.c:998:libxl__create_device_model: chardev=libxl-cmd,mode=control
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -xen-attach
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -name
libxl: debug: libxl_dm.c:998:libxl__create_device_model: debian
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -nographic
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -M
libxl: debug: libxl_dm.c:998:libxl__create_device_model: xenpv
libxl: debug: libxl_dm.c:998:libxl__create_device_model: -m
libxl: debug: libxl_dm.c:998:libxl__create_device_model: 257
libxl: debug: libxl_qmp.c:692:libxl__qmp_initialize: connected to /var/run/xen/qmp-libxl-24
libxl: debug: libxl_qmp.c:298:qmp_handle_response: message type: qmp
libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{"execute":"qmp_capabilities","id":1}'
libxl: debug: libxl_qmp.c:298:qmp_handle_response: message type: return
libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{"execute":"query-chardev","id":2}'
libxl: debug: libxl_qmp.c:298:qmp_handle_response: message type: return
libxl: debug: libxl_qmp.c:555:qmp_send_prepare: next qmp command: '{"execute":"query-vnc","id":3}'
libxl: debug: libxl_qmp.c:298:qmp_handle_response: message type: return
Daemon running with PID 6479
xc: debug: hypercall buffer: total allocations:153 total releases:153
xc: debug: hypercall buffer: current allocations:0 maximum allocations:2
xc: debug: hypercall buffer: cache current size:2
xc: debug: hypercall buffer: cache hits:148 misses:2 toobig:3
I don’t know how to interpret the above output. When I try to connect to the domain via “xl console”, I get the following output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@xxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
[ 0.000000] Command line: debian-installer/exit/always_halt=true -- console=hvc0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000010000000
[ 0.000000] RAMDISK: 016fa000 - 03117000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000010000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000010000000
[ 0.000000] NODE_DATA [000000000006a000 - 0000000000071fff]
[ 0.000000] bootmap [0000000000072000 - 0000000000073fff] pages 2
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [000319a000 - 00031b7000] XEN PAGETABLES ==> [000319a000 - 00031b7000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #3 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[ 0.000000] #4 [00016fa000 - 0003117000] RAMDISK ==> [00016fa000 - 0003117000]
[ 0.000000] #5 [0003117000 - 000319a000] XEN START INFO ==> [0003117000 - 000319a000]
[ 0.000000] #6 [0000008000 - 000006a000] PGTABLE ==> [0000008000 - 000006a000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00010000
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present
[ 0.000000] APIC: disable apic facility
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.2-unstable (preserve-AD)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff8800031ed000 s90328 r8192 d24360 u122880
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 64443
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: debian-installer/exit/always_halt=true -- console=hvc0
[ 0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 222956k/262144k available (3083k kernel code, 384k absent, 38804k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2660.052 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.10 BogoMIPS (lpj=10640208)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 256K
[ 0.004000] CPU: L3 cache: 8192K
[ 0.004000] CPU 0/0x6 -> Node 0
[ 0.004000] CPU: Unsupported number of siblings 16
[ 0.004000] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.004000] Freeing SMP alternatives: 28k freed
[ 0.004240] Brought up 1 CPUs
[ 0.004439] devtmpfs: initialized
[ 0.011965] Grant table initialized
[ 0.011978] regulator: core version 0.5
[ 0.012024] NET: Registered protocol family 16
[ 0.012331] PCI: Fatal: No config space access function found
[ 0.012777] bio: create slab <bio-0> at 0
[ 0.012899] ACPI: Interpreter disabled.
[ 0.012941] xen_balloon: Initialising balloon driver.
[ 0.012941] vgaarb: loaded
[ 0.012941] PCI: System does not support PCI
[ 0.012941] PCI: System does not support PCI
[ 0.012941] Switching to clocksource xen
[ 0.014224] pnp: PnP ACPI: disabled
[ 0.014597] NET: Registered protocol family 2
[ 0.014715] IP route cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.015113] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.015254] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.015342] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.015353] TCP reno registered
[ 0.015447] NET: Registered protocol family 1
[ 0.015526] Unpacking initramfs...
[ 0.046953] Freeing initrd memory: 26740k freed
[ 0.056738] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.057076] audit: initializing netlink socket (disabled)
[ 0.057102] type=2000 audit(1339162066.687:1): initialized
[ 0.063338] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.065855] VFS: Disk quotas dquot_6.5.2
[ 0.065951] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.066095] msgmni has been set to 487
[ 0.066412] alg: No test for stdrng (krng)
[ 0.066515] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.066530] io scheduler noop registered
[ 0.066537] io scheduler anticipatory registered
[ 0.066546] io scheduler deadline registered
[ 0.066652] io scheduler cfq registered (default)
[ 0.070219] Linux agpgart interface v0.103
[ 0.070279] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.070573] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.070662] PNP: No PS/2 controller found. Probing ports directly.
[ 0.071502] i8042.c: No controller found.
[ 0.071613] mice: PS/2 mouse device common for all mice
[ 0.071702] rtc_cmos: probe of rtc_cmos failed with error -16
[ 0.071744] cpuidle: using governor ladder
[ 0.071753] cpuidle: using governor menu
[ 0.071765] No iBFT detected.
[ 0.072238] TCP cubic registered
[ 0.072448] NET: Registered protocol family 10
[ 0.073558] Mobile IPv6
[ 0.073571] NET: Registered protocol family 17
[ 0.073723] registered taskstats version 1
[ 0.073746] XENBUS: Device with no driver: device/vbd/51712
[ 0.073754] XENBUS: Device with no driver: device/vif/0
[ 0.073788] /build/buildd-linux-2.6_2.6.32-45-amd64-FcX7RM/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.073852] Initalizing network drop monitor service
[ 0.073962] Freeing unused kernel memory: 592k freed
[ 0.074170] Write protecting the kernel read-only data: 4240k
Loading, please wait...
[ 0.140302] udev[46]: starting version 164
[ 0.224372] Initialising Xen virtual ethernet driver.
[ 0.231454] blkfront: xvda: barriers enabled
[ 0.231630] xvda: xvda1 xvda2 < xvda5 >
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... [ 0.534766] PM: Starting manual resume from disk
done.
mount: can't read '/etc/fstab': No such file or directory
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... mount: mounting /dev on /root/dev failed: No such file or directory
done.
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have requested /sbin/init.
No init found. Try passing init= bootarg.
BusyBox v1.17.1 (Debian 1:1.17.1-8) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs)
(initramfs)
So, what am I doing wrong?
Regards
--
Thanos Makatos
