Xen project Mailing List

auto xenbr0

iface xenbr0 inet manual

bridge_ports eth0

This time Dom0 has no network.

I also tried:

auto xenbr0

iface xenbr0 inet dhcp

bridge_ports eth0

Dom0 also has no network.

Thanks!

On Mon, May 14, 2012 at 12:36 AM, Casey DeLorme <cdelorme@xxxxxxxxx> wrote:

Hello,

Guessing eth0 isn't a bridge, have you tried creating a bridge and using that instead?

bridge-utils package installed and add to /etc/networking/interfaces:

auto xenbr0
iface xenbr0 inet manual
bridge_ports eth0

Then replace eth0 in the centos HVM configuration?

On Mon, May 14, 2012 at 1:25 AM, Sisu Xi <xisisu@xxxxxxxxx> wrote:

Hi, all:

I am using Ubuntu 12.04, 64bit. compiled Linux kernel from source, kernel is 3.3.6. Compiled Xen from source, version is 4.1.2.

so far so good.
Dom0 can boot without problem. Dom0 has network.

However, when I downloaded the vmlinuz and initrd.img for centos 6.2 and try to install it,
I first picked network install, then it asked me to pick network, I choose DHCP for both iipv4 and ipv6.
After that, it stops at
"Waiting for NetworkManager to configure eth0."
"Retry".

From the notification area, I can see that a vif2.0 has been created.

I disabled the firewall, and ubuntu seems don't have selinux problem. could someone help me with this?

Thanks in advance.

"xl info" gives:
hostÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : xisisu-desktop
releaseÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : 3.3.6
versionÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : #1 SMP Sun May 13 18:24:00 CDT 2012
machineÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : x86_64
nr_cpusÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : 12
nr_nodesÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : 1
cores_per_socketÂÂÂÂÂÂ : 6
threads_per_coreÂÂÂÂÂÂ : 2
cpu_mhzÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : 3378
hw_capsÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : bfebfbff:2c000800:00000000:00003f40:029ae3bf:00000000:00000001:00000000
virt_capsÂÂÂÂÂÂÂÂÂÂÂÂÂ : hvm hvm_directio
total_memoryÂÂÂÂÂÂÂÂÂÂ : 12277
free_memoryÂÂÂÂÂÂÂÂÂÂÂ : 1094
free_cpusÂÂÂÂÂÂÂÂÂÂÂÂÂ : 0
xen_majorÂÂÂÂÂÂÂÂÂÂÂÂÂ : 4
xen_minorÂÂÂÂÂÂÂÂÂÂÂÂÂ : 1
xen_extraÂÂÂÂÂÂÂÂÂÂÂÂÂ : .2
xen_capsÂÂÂÂÂÂÂÂÂÂÂÂÂÂ : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
xen_schedulerÂÂÂÂÂÂÂÂÂ : credit
xen_pagesizeÂÂÂÂÂÂÂÂÂÂ : 4096
platform_paramsÂÂÂÂÂÂÂ : virt_start=0xffff800000000000
xen_changesetÂÂÂÂÂÂÂÂÂ : unavailable
xen_commandlineÂÂÂÂÂÂÂ :
cc_compilerÂÂÂÂÂÂÂÂÂÂÂ : gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5)
cc_compile_byÂÂÂÂÂÂÂÂÂ : xisisu
cc_compile_domainÂÂÂÂÂ :
cc_compile_dateÂÂÂÂÂÂÂ : Sun May 13 17:46:53 CDT 2012
xend_config_formatÂÂÂÂ : 4

Here is the install configure file:

"name="centosinstall"
vcpus=2
memory=2048
disk=['file:/home/xisisu/Desktop/VM/vm1.img,xvda,w']
vif=['bridge=eth0']
kernel="/home/xisisu/Desktop/vmlinuz"
ramdisk="/home/xisisu/Desktop/initrd.img"
>>

Â

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

Re: [Xen-users] domu has no network when installing (but Dom0 has) -- sisu