Re: [Xen-users] no network on domU in network-bridge configuration on Xen-4.0

[Ian Campbell <Ian.Campbell@xxxxxxxxxx>]

On Fri, 2012-03-16 at 12:58 +0000, Motiejus JakÅtys wrote:

> buddha# ifconfig -a
[...]
> vif1.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff  
>           inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
>           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
>           RX packets:3 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:4369 errors:0 dropped:43 overruns:0 carrier:0
>           collisions:0 txqueuelen:32 
>           RX bytes:84 (84.0 B)  TX bytes:487332 (475.9 KiB)
[...]
> buddha# brctl show
> bridge name   bridge id               STP enabled     interfaces
> eth0          8000.0030485a05fa       no              peth0

vif1.0 does not appear to be on the bridge. This would usually indicate
some sort of problem with your hotplug scripts.

I presume that you can ping from dom0 (budha) to an external address?
i.e. the hosts external connectivity is ok.

Ian.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users