[Xen-users] problem with vm creation

[Yamini L <lpyamini@xxxxxxxxx>]

Hi all,

I tried to create a virtual machine via xen using

xm create -c xenconfigfile(xencentos) --> this is my config file..

My host OS is Centos 5.5 and the image i tried to boot is a fedora image.

I am enclosing herewith the messages that were received via xen on giving xm create command.

Please help me in solving out this issue.


[root@yami ~]# vi  /root/Desktop/xen/xen/xencentos

[root@yami ~]# xm create -c /root/Desktop/xen/xen/xencentos


Using config file "/root/Desktop/xen/xen/xencentos".
Started domain testing
[   
 0.000000] Linux version 2.6.24-19-xen (hiranotaka@noto) (gcc version 
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #2 SMP Fri May 23 03:11:08 JST 2008 
(Ubuntu 2.6.24-4.6-generic)
[    0.000000] Reserving virtual address space above 0xf5800000
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 0000000010200000 (usable)
[    0.000000] 0MB HIGHMEM available.

[    0.000000] 258MB LOWMEM available.
[    0.000000] NX (Execute Disable) protection: active
[ 2165.049639] Zone PFN ranges:
[ 2165.049667]   DMA             0 ->     4096
[ 2165.049679]   Normal       4096 ->    66048

[ 2165.049686]   HighMem     66048 ->    66048
[ 2165.049694] Movable zone start PFN for each node
[ 2165.049706] early_node_map[1] active PFN ranges
[ 2165.049718]     0:        0 ->    66048
[ 2165.054460] ACPI in unprivileged domain disabled

[ 2165.054557] Allocating PCI resources starting at 20000000 (gap: 10200000:efe00000)
[ 2165.055464] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65532
[ 2165.055530] Kernel command line:  root=/dev/sda1 ro fastboot

[ 2165.056397] Enabling fast FPU save and restore... done.
[ 2165.056652] Enabling unmasked SIMD FPU exception support... done.
[ 2165.056770] Initializing CPU#0
[ 2165.057717] PID hash table entries: 1024 (order: 10, 4096 bytes)

[ 2165.058998] Xen reported: 2394.064 MHz processor.
[    1.120795] console [xvc0] enabled
[    1.123283] Console: colour dummy device 80x25
[    1.123619] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[    1.123930] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    1.124065] Software IO TLB disabled
[    1.124115] vmalloc area: d1000000-f53fe000, maxmem 2d800000
[    1.126377] Memory: 229144k/264192k available (2225k kernel code, 26768k reserved, 1014k data, 212k init, 0k highmem)

[    1.126427] virtual kernel memory layout:
[    1.126430]     fixmap  : 0xf568d000 - 0xf57ff000   (1480 kB)
[    1.126431]     pkmap   : 0xf5400000 - 0xf5600000   (2048 kB)
[    1.126432]     vmalloc : 0xd1000000 - 0xf53fe000   ( 579 MB)

[    1.126432]     lowmem  : 0xc0000000 - 0xd0200000   ( 258 MB)
[    1.126433]       .init : 0xc042f000 - 0xc0464000   ( 212 kB)
[    1.126434]       .data : 0xc032c4a1 - 0xc0429d04   (1014 kB)
[    1.126434]       .text : 0xc0100000 - 0xc032c4a1   (2225 kB)

[    1.126517] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[    1.184481] Calibrating delay using timer specific routine.. 4852.64 BogoMIPS (lpj=9705281)
[    1.185247] Security Framework initialized

[    1.185774] SELinux:  Disabled at boot.
[    1.186158] AppArmor: AppArmor initialized
[    1.186540] Failure registering capabilities with primary security module.
[    1.186878] Mount-cache hash table entries: 512

[    1.191834] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.191880] CPU: L2 cache: 256K
[    1.191899] CPU: L3 cache: 3072K
[    1.192081] Compat vDSO mapped to f57fe000.
[    1.192363] Checking 'hlt' instruction... OK.

[    1.206606] SMP alternatives: switching to UP code
[    1.218350] Freeing SMP alternatives: 11k freed
[    1.222702] Early unpacking initramfs... done
[    1.266526] Brought up 1 CPUs
[    1.275003] net_namespace: 64 bytes

[    1.275200] failed to set up cpufreq notifier
[    1.283532] Time: 165:165:165  Date: 165/165/65
[    1.284377] NET: Registered protocol family 16
[    1.316387] Brought up 1 CPUs
[    1.326683] PCI: Fatal: No config space access function found

[    1.326825] PCI: setting up Xen PCI frontend stub
[    1.329729] ACPI: Interpreter disabled.
[    1.329816] Linux Plug and Play Support v0.97 (c) Adam Belay
[    1.329988] pnp: PnP ACPI: disabled
[    1.335212] xen_mem: Initialising balloon driver.

[    1.348602] PCI: System does not support PCI
[    1.348641] PCI: System does not support PCI
[    1.350960] Setting mem allocation to 256000 kiB
[    1.362766] NET: Registered protocol family 8
[    1.362796] NET: Registered protocol family 20

[    1.363847] AppArmor: AppArmor Filesystem Enabled
[    1.366358] Time: xen clocksource has been installed.
[    1.366759] NET: Registered protocol family 2
[    1.408047] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[    1.409939] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.410040] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.410239] TCP: Hash tables configured (established 8192 bind 8192)

[    1.410299] TCP reno registered
[    1.418903] checking if image is initramfs... it is
[    1.445578] Freeing initrd memory: 19512k freed
[    1.450391] audit: initializing netlink socket (disabled)
[    1.450673] audit(1296721105.293:1): initialized

[    1.453175] VFS: Disk quotas dquot_6.5.1
[    1.453276] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.457626] io scheduler noop registered
[    1.459905] io scheduler anticipatory registered

[    1.459933] io scheduler deadline registered
[    1.460538] io scheduler cfq registered (default)
[    1.473179] Xen virtual console successfully installed as xvc0
[    1.473351] Event-channel device installed.

[    1.522313] Successfully initialized TPM backend driver.
[    1.566856] netfront: Initialising virtual ethernet driver.
[    1.577725] xen-vbd: registered block device major 8
[    1.664677] rtc: IRQ 8 is not free.

[    1.667518] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.668277] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.669064] PNP: No PS/2 controller found. Probing ports directly.

[    1.670446] i8042.c: No controller found.
[    1.675784] mice: PS/2 mouse device common for all mice
[    1.676041] cpuidle: using governor ladder
[    1.677789] NET: Registered protocol family 1
[    1.678125] Using IPI No-Shortcut mode

[    1.680207] registered taskstats version 1
[    1.773599]   Magic number: 1:252:3141
[    1.776957] Freeing unused kernel memory: 212k freed
Loading, please wait...
Begin: Loading essential drivers... ...

[    3.038501] fuse init (API version 7.9)
[    3.119511] thermal: Unknown symbol acpi_processor_set_thermal_limit
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...

Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[    3.932305] clocksource/0: Time went backwards: ret=1f947d195dc delta=-11907532 shadow=1f9408cb229 offset=7fc93bf
[    4.072433] clocksource/0: Time went backwards: ret=1f958b08239 delta=-10522736 shadow=1f9408cb229 offset=18c50287

Done.
Begin: Running /scripts/local-premount ...
Begin: Waiting for resume device... ...
[    5.993423] clocksource/0: Time went backwards: ret=1fa0333e655 delta=-11796286 shadow=1f9f35e90d3 offset=1089e9ca
Done.

Done.
[   11.061535] kjournald starting.  Commit interval 5 seconds
[   11.062689] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...

Done.
[   11.504933] attempt to access beyond end of device
[   11.504990] sda1: rw=32, want=1835552, limit=1585288
[   11.505082] EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=57346, block=229443

Target filesystem doesn't have /sbin/init


BusyBox v1.1.3 (Debian 1:1.1.3-5ubuntu12) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users