Re: [Xen-users] Xen bonding, vlans, bridging with dom0 included...

["Fajar A. Nugraha" <fajar@xxxxxxxxx>]

On Tue, Aug 31, 2010 at 9:45 PM, Donny Brooks <dbrooks@xxxxxxxxxxxxxxxx> wrote:
> This setup works with xen to allow the vlans to be passed to the domu's via 
> the "bridge=brX" config. What I cannot get to work is the dom0 "management" 
> ip to be on the bond also unless I put it's IP address configuration settings 
> in the ifcfg-bond0 file. Is this normal? I thought I read somewhere that the 
> IP settings had to go in the ifcfg-brX or ifcfg-bond0.X file but neither of 
> those work.

It depends on what you need.

If you need dom0 IP address on a specific vlan, then it should be on
ifcfg-brX (NOT ifcfg-bond0.X). But if you want it to be on the default
native vlan, then it can be on ifcfg-bond0.

-- 
Fajar

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users