RE: [Xen-users] please help with xen networking with 2 ips

[Nathan Eisenberg <nathan@xxxxxxxxxxxxxxxx>]

I donât understand how you âhaveâ IPs from two different /8âs on the same physical network. Please clarify.

 

% Information related to '85.214.0.0/16AS6724'

route:ÂÂÂÂÂÂÂ 85.214.0.0/16

descr:ÂÂÂÂÂÂÂ Strato Rechenzentrum

origin:ÂÂÂÂÂÂ AS6724

mnt-by:ÂÂÂÂÂÂ STRATO-RZG-MNT

source:ÂÂÂÂÂÂ RIPE # Filtered

 

% Information related to '81.169.0.0/17AS29005'

route:ÂÂÂÂÂÂÂÂÂ 81.169.0.0/17

descr:ÂÂÂÂÂÂÂÂÂ BE-PROXIMUS

origin:ÂÂÂÂÂÂÂÂ AS29005

mnt-by:ÂÂÂÂÂÂÂÂ PROXIMUS-MTNER

mnt-by:ÂÂÂÂÂÂÂÂ SKYNETBE-MNT

source:ÂÂÂÂÂÂÂÂ RIPE # Filtered

 

From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Timor A.
Sent: Sunday, August 22, 2010 2:54 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] please help with xen networking with 2 ips

 

Hi,

the networking just drives me crazy and it seems that i am missing something.

So here is my situation:
i have a server with 2 public IPs (85.214.1.230 and 81.169.1.81)
the dom0 is on:
ip 81.169.1.81
netmask 255.255.255.255
gw 81.169.1.1


i would like to have a domU with ip 85.214.1.230.

I tried everything routing, bridging.. nothing seems to work.

my dom0 config;
.
(network-script network-bridge)
(vif-script vif-bridge)





:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
81.169.1.1    0.0.0.0         255.255.255.255 UH    0      0        0 eth0
0.0.0.0         81.169.1.1    0.0.0.0         UG    0      0        0 eth0

:~# brctl  showstp eth0
eth0
bridge id 8000.40618651c0b6
designated root 8000.40618651c0b6
root port    0 path cost    0
max age   20.00 bridge max age   20.00
hello time    2.00 bridge hello time    2.00
forward delay    0.00 bridge forward delay    0.00
ageing time 300.01
hello timer    1.10 tcn timer    0.00
topology change timer    0.00 gc timer    0.10
flags


peth0 (1)
port id 8001 state      forwarding
designated root 8000.40618651c0b6 path cost   19
designated bridge 8000.40618651c0b6 message age timer    0.00
designated port 8001 forward delay timer    0.00
designated cost    0 hold timer    0.10
flags

vif11.0 (2)
port id 8002 state      forwarding
designated root 8000.40618651c0b6 path cost 100
designated bridge 8000.40618651c0b6 message age timer    0.00
designated port 8002 forward delay timer    0.00
designated cost    0 hold timer    0.10
flags



domU config:
vif         = [ 'bridge=eth0' ]



any help would be highly appreciated

 

-- 

Mit freundlichen GrÃÃen / Kind Regards,

Timor A.

cyHex - Logical Solutions

timor@xxxxxxxxx

+493051643600

+491632301182

www.cyhex.com

___________________________________________________________________

The information contained in this message is proprietary of cyHex,

protected from disclosure, and may be privileged.

The information is intended to be conveyed only to the designated

recipient(s) of the message. If the reader of this message is not

the intended recipient, you are hereby notified that any

dissemination, use, distribution or copying of this communication

is strictly prohibited and may be unlawful.

If you have received this communication in error, please notify us

immediately by replying to the message and deleting it from your

computer.

Thank you.

 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users