Re: [Xen-users] sda instead of xvda ?`

[Tegger <xen@xxxxxxxxx>]

you need to add an new line after line 90, then it works...

i have now trouble with the kernel as xen domain,

xen-create-image --size=4Gb --swap=1Gb --hostname=SAMBA2 
--ip=192.168.123.215 --netmask=255.255.255.0 --gateway=192.168.123.253 
--dist=lenny --fs=ext3 --kernel=/boot/vmlinuz-2.6.34.2 --memory=356Mb 
--passwd --role=udev --dir=/home/user/
but i was unable to build a runnable xen domain

i copy manually

DOM0:~# mount -o loop /home/userle/domains/SAMBA2/disk.img /mnt/
DOM0:/mnt# cp -r /lib/modules/2.6.34.2/ lib/modules/2.6.34.2/

but:

.
.
.
.
[    0.206158] mice: PS/2 mouse device common for all mice
[    0.206331] rtc_cmos: probe of rtc_cmos failed with error -16
[    0.206698] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) 
initialised: dm-devel@xxxxxxxxxx
[    0.206780] cpuidle: using governor ladder
[    0.206785] cpuidle: using governor menu
[    0.207925] usbcore: registered new interface driver hiddev
[    0.207966] usbcore: registered new interface driver usbhid
[    0.207971] usbhid: USB HID core driver
modprobe: FATAL: Could not load /lib/modules/2.6.34.2/modules.dep: No 
such file or directory
[    0.210269] ALSA device list:
[    0.210274]   No soundcards found.
[    0.210295] Netfilter messages via NETLINK v0.30.
[    0.210308] nf_conntrack version 0.5.0 (2683 buckets, 10732 max)
[    0.210408] ctnetlink v0.93: registering with nfnetlink.
[    0.210677] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.210704] TCP cubic registered
[    0.210707] Initializing XFRM netlink socket
[    0.210987] NET: Registered protocol family 10
[    0.211512] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    0.211546] IPv6 over IPv4 tunneling driver
[    0.211911] NET: Registered protocol family 17
[    0.212153] registered taskstats version 1
[    0.217779] blkfront: xvda2: barriers enabled
[    0.218541] blkfront: xvda1: barriers enabled
[    0.312052] XENBUS: Device with no driver: device/console/0
[    0.312087]   Magic number: 1:252:3141
[    0.312341] Freeing unused kernel memory: 552k freed
[    0.312535] Write protecting the kernel read-only data: 10240k




Am 02.08.2010 21:57, schrieb Major Hayden:
> I just download the source for 2.6.34.2 and it applied cleanly for me.  The 
> diff may have been garbled in the original e-mail.  You can download it 
> directly from:
>
>    http://kernel.slicehost.com/2.6.34.1-rscloud/patches/2.6.34.1-rscloud.diff
>
> Let me know if you're still having trouble with it.
>
> --
> Major Hayden
> major@xxxxxxxx
>
> On Aug 2, 2010, at 14:28, Tegger wrote:
>
>    
> > hmm, i got an error
> >
> > DOM0:~/linux-2.6.34.2# git apply pvops.diff
> > fatal: corrupt patch at line 90
> > DOM0:~/linux-2.6.34.2#
> >
> >
> >
> > Am 02.08.2010 20:50, schrieb Major Hayden:
> >      
> > > You can download a tarball of the kernel source from kernel.org, or you can 
> > > check out a copy via git.  Here are the basic steps:
> > >
> > >    wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.34.2.tar.bz2
> > >    tar xzf linux-2.6.34.2.tar.bz2
> > >    cd linux-2.6.34.2
> > >    git apply pvops.diff
> > >
> > >  From there, you can proceed with building the kernel as you normally would.  The 
> > > "pvops.diff" referenced above is the diff attached to the original xen-devel 
> > > e-mail I sent:
> > >
> > >    http://lists.xensource.com/archives/html/xen-devel/2010-05/msg00712.html
> > >
> > > There are two parts to the diff: one part allows you to configure the block 
> > > device names arbitrarily and the other part adjusts the hvc console in the same 
> > > way.  You might want to remove the portion of the diff related to the console 
> > > as it's probably not necessary for your system.
> > >
> > > --
> > > Major Hayden
> > > major@xxxxxxxx
> > >
> > > On Aug 2, 2010, at 11:51, Tegger wrote:
> > >
> > >
> > >        
> > > > how should i patch the diff ?
> > > > i haven't a/ and b/ directory....
> > > >
> > > > Am 22.07.2010 22:22, schrieb Major Hayden:
> > > >
> > > >          
> > > > > If you don't mind using a custom kernel, you can patch it [1] to ensure that 
> > > > > your disks appear as sdX rather than xvdX.
> > > > >
> > > > > [1] http://lists.xensource.com/archives/html/xen-devel/2010-05/msg00712.html
> > > > >
> > > > > --
> > > > > Major Hayden
> > > > > major@xxxxxxxx
> > > > >
> > > > > On Jul 21, 2010, at 15:35, Tegger wrote:
> > > > >
> > > > >
> > > > >
> > > > >            
> > > > > > Hi,
> > > > > >
> > > > > > how can i passthroughs HDD with sda instead of xvda ?
> > > > > >
> > > > > > _______________________________________________
> > > > > > Xen-users mailing list
> > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > http://lists.xensource.com/xen-users
> > > > > >
> > > > > >
> > > > > >              
> > > > >            
> > > >          
> > >        
> >      
>    

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users