Re: [Xen-users] Xen bridge no longer working

[khris4 <khris4@xxxxxxxxx>]

It's always a good idea to backup any script that you edited. When you update
there is a chance the anything that you edit relate tow the package will be
overwritten. I'm glad you was able to figure out the issue. 

:) 

Flavio-11 wrote:
> 
> Hello everybody,
> 
> Here again with a Xenbr0 bridge problem
> I'm a Gentoo user, xen-sources-2.6.34 and I always used the bridge from
> eth0
> to xenbr0.
> Here's what I get at boot time:
> * Bringing up interface eth0
> *     null
> [...]
> * Starting Xen control daemon ...
> 
> And the bridge doesn't come up.
> 
> The normal behaviour should be that the Xenbr0 bridge comes up
> automatically, but it doesn't anymore.
> Here's my network configuration file (/etc/conf.d/net):
> 
> config_eth0=( "null" )
> 
> bridge_xenbr0="eth0"
> 
> brctl_xenbr0=(
>  "setfd 0"
>  "stp off"
> )
> 
> config_xenbr0=(
>    "dhcp"
> )
> 
> I don't understand why, the bridge doesn't come up.
> 
> This is the output of the ifconfig command:
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:52 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:5232 (5.1 KiB)  TX bytes:5232 (5.1 KiB)
> 
> peth0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
>           inet6 addr: fe80::260:97ff:fe20:464b/64 Scope:Link
>           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
>           RX packets:98 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:5880 (5.7 KiB)  TX bytes:1234 (1.2 KiB)
>           Interrupt:17 Base address:0xec00
> 
> xenbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00
>           inet6 addr: fe80::260:97ff:fe20:464b/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:94 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:4314 (4.2 KiB)  TX bytes:468 (468.0 B)
> 
> Can somebody help me to understand why the xenbr0 bridge no longer comes
> up?
> 
> 
> -- 
> Flavio
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 

-- 
View this message in context: 
http://old.nabble.com/Xen-bridge-no-longer-working-tp29119798p29127395.html
Sent from the Xen - User mailing list archive at Nabble.com.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users