|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] no bridge is shown by ifconfig on Xen Debian
You are right but the problem is this wiki page http://wiki.xensource.com/xenwiki/XenNetworking see just Ctrl+F following "default bridge name in xen 3.2" in the blue heading network-bridge point number 6 says "peth0 and vif0.0 are attached to bridge xenbr0. Please notice that in xen 3.3, the default bridge name is the same than the interface it is attached to. Eg: bridge name eth0, eth1 or ethX.VlanID " note above they are saying in xen 3.3 default bridge name is same as ethernet the interface is attached to I am using xen 3.2 so it should be xen-br0 my problem is I want to rename the default bridge eth2 for an experiment. Which I am unable to. On Sat, Apr 10, 2010 at 8:40 PM, Grant McWilliams <grantmasterflash@xxxxxxxxx> wrote: > > > On Sat, Apr 10, 2010 at 8:00 AM, Tapas Mishra <mightydreams@xxxxxxxxx> > wrote: >> >> I do an ifconfig but at the last of it there is no bridge name >> have a look at it I have installed all the things myself. >> As Xen wiki page says the default bridge should be xen-br0 in the last >> output of ifconfig it is not there >> it is Xen-3.2.1 default name of bridge as they are saying should be >> the same as default ethernet interface but that is xen-3.3 read point >> number 6.So this is not the exact case with me.Where is the difference >> occuring. >> Here is >> http://wiki.xensource.com/xenwiki/XenNetworking >> >> DDDE:~# ifconfig >> eth2 Link encap:Ethernet HWaddr 00:26:b9:82:42:38 >> inet addr:192.1.100.12 Bcast:192.1..255 Mask:255.255.0.0 >> inet6 addr: fe80::226:b9ff:fe82:4238/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:573 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:0 >> RX bytes:215986 (210.9 KiB) TX bytes:20257 (19.7 KiB) >> >> >> >> -- >> Tapas >> >> _______________________________________________ > > Check the output of brctl show. I'd almost bet your bridge is eth2. > > Grant McWilliams > > -- Tapas http://news.gmane.org/gmane.comp.emulators.xen.user +91 8971248477 _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |