|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Re: [Xen-users] pvops dom0 kernel: Unable to locate IOAPIC for GSI 2 and 9
On Wed, Mar 17, 2010 at 03:20:13PM -0700, kishore kumar wrote: > Here is the output of df -h and cat /etc/fstab of my machine. > Did you try both root=/dev/mapper/VolGroup01-LogVol00 and root=/dev/VolGroup01/LogVol00 arguments for the dom0 kernel? How did you generate the initrd image for the dom0 kernel? Anyway this sounds like a grub.conf or initrd problem, not Xen or pvops dom0 kernel kernel problem. -- Pasi > Please let me know your thoughts. > > [root@localhost kishore]# df -h > > Filesystem Size Used Avail Use% Mounted on > > /dev/mapper/VolGroup01-LogVol00 > > 223G 29G 182G 14% / > > /dev/sda1 99M 81M 13M 87% /boot > > tmpfs 757M 0 757M 0% /dev/shm > > [root@localhost kishore]# cat /etc/fstab > > /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 > > LABEL=/boot /boot ext3 defaults 1 2 > > tmpfs /dev/shm tmpfs defaults 0 0 > > devpts /dev/pts devpts gid=5,mode=620 0 0 > > sysfs /sys sysfs defaults 0 0 > > proc /proc proc defaults 0 0 > > /dev/VolGroup01/LogVol01 swap swap defaults 0 0 > > [root@localhost kishore]# > > On Tue, Mar 16, 2010 at 4:18 PM, Pasi Kärkkäinen <[1]pasik@xxxxxx> wrote: > > On Tue, Mar 16, 2010 at 03:40:46PM -0700, kishore kumar wrote: > > I am not sure. Can you please let me know how to check this? any > command > > ?? > > well simple "df -h" will show it. and also "cat /etc/fstab". > You can also check it from your grub configuration.. from the working > baremetal (non-Xen) entry. > > -- Pasi > > > > On Tue, Mar 16, 2010 at 3:29 PM, Pasi Kärkkäinen > <[1][2]pasik@xxxxxx> wrote: > > > > On Tue, Mar 16, 2010 at 03:22:50PM -0700, kishore kumar wrote: > > > attached is the log captured in with the word document . > > > > > > > Scanning logical volumes > > Reading all physical volumes. This may take a while... > > Activating logical volumes > > Volume group "VolGroup01" not found > > Trying to resume from /dev/VolGroup01/LogVol01 > > Unable to access resume device (/dev/VolGroup01/LogVol01) > > Creating root device. > > Mounting root filesystem. > > mount: could not find filesystem '/dev/root' > > Setting up other filesystems. > > Setting up new root fs > > setuproot: moving /dev failed: No such file or directory > > no fstab.sys, mounting internal defaults > > setuproot: error mounting /proc: No such file or directory > > setuproot: error mounting /sys: No such file or directory > > Switching to new root and running init. > > unmounting old /dev > > unmounting old /proc > > unmounting old /sys > > switchroot: mount failed: No such file or directory > > init used greatest stack depth: 4088 bytes left > > Kernel panic - not syncing: Attempted to kill init! > > > > So it seems it gets all the way to executing the initrd image, > > which then fails to mount the root fs. > > > > Earlier in the log: > > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > > ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA3AA, max UDMA/133 > > ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA > > ata1.00: configured for UDMA/133 > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO > PQ: 0 > > ANSI: 5 > > sd 0:0:0:0: Attached scsi generic sg0 type 0 > > sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 > GiB) > > sd 0:0:0:0: [sda] Write Protect is off > > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't > > support DPO or FUA > > sda: sda1 sda2 > > sd 0:0:0:0: [sda] Attached SCSI disk > > > > so /dev/sda was detected. Is your root lvm volume on /dev/sda ? > > Is /dev/VolGroup01/LogVol01 really your root fs? > > > > -- Pasi > > > > > > > > > > > On Tue, Mar 16, 2010 at 3:03 PM, Pasi Kärkkäinen > > <[1][2][3]pasik@xxxxxx> wrote: > > > > > > On Tue, Mar 16, 2010 at 02:56:06PM -0700, kishore kumar > wrote: > > > > Please find the attached log file after fixing the > dom 0 > > kernel cmd > > > line > > > > as below > > > > > > > > ro root=/dev/VolGroup01/LogVol00 console=hvc0 > > earlyprintk=xen > > > nomodeset > > > > > > > > > > There's something wrong with the log, the dom0 kernel > parts are > > all on > > > one line.. > > > It's really difficult to read it. > > > > > > -- Pasi > > > > > > > Thanks > > > > > > > > > > > > On Tue, Mar 16, 2010 at 2:29 PM, Pasi Kärkkäinen > > > <[1][2][3][4]pasik@xxxxxx> wrote: > > > > > > > > On Tue, Mar 16, 2010 at 02:16:22PM -0700, kishore > kumar > > wrote: > > > > > I did below steps. > > > > > > > > > > > > > > > I pulled DOM 0 kernel from > > > > > git clone > > > > > > > > > > > git://[1][2][3][4][5]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > linux-2.6-xen > > > > > > > > > > cd linux-2.6-xen > > > > > > > > > > make clean > > > > > > > > > > cp -a .config .config-old > > > > > > > > > > wget -O .config > > > > > > > > > > > > > > > > [2][3][4][5][6]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > > > > > > make oldconfig > > > > > > > > > > make bzImage > > > > > > > > > > make modules > > > > > > > > > > make modules_install > > > > > > > > > > cp -a .config /boot/config-2.6.32.9 > > > > > > > > > > cp -a System.map /boot/System.map-2.6.32.9 > > > > > > > > > > cp -a arch/x86/boot/bzImage > /boot/vmlinuz-2.6.32.9 > > > > > > > > > > and modified the grub.conf as below > > > > > > > > > > > > > > > Root(hd0,0) > > > > > > > > > > kernel /xen.gz console=vga,com1 > com1=115200,8n1 > > msi=1 > > > iommu=1 > > > > > > > > > > module /vmlinuz-2.6.32.9 ro > > root=/dev/VolGroup01/LogVo100 > > > rhgb > > > > quiet > > > > > > > > > > module /initrd-2.6.32.9.img > > > > > > > > > > > > > > > and rebooted the machine. Then It booted with > some > > xen > > > messages > > > > and > > > > > stopped. Those were the messages captured > from > > serial > > > console. > > > > > > > > > > Please let me know if I did something wrong > here. > > > > > > > > > > > > > Please fix the kernel cmdline based on my earlier > email, > > and > > > capture and > > > > post the > > > > serial console log again! > > > > > > > > -- Pasi > > > > > > > > > > > > > > > On Tue, Mar 16, 2010 at 1:20 PM, Pasi > Kärkkäinen > > > > <[3][4][5][6][7]pasik@xxxxxx> wrote: > > > > > > > > > > On Tue, Mar 16, 2010 at 01:16:28PM -0700, > Jeremy > > > Fitzhardinge > > > > wrote: > > > > > > On 03/16/2010 12:48 PM, Pasi Kärkkäinen > wrote: > > > > > >> On Tue, Mar 16, 2010 at 09:43:44PM +0200, > Pasi > > > Kärkkäinen > > > > wrote: > > > > > >> > > > > > >>> On Tue, Mar 16, 2010 at 10:32:17AM > -0700, > > kishore > > > kumar > > > > wrote: > > > > > >>> > > > > > >>>> Attached is the output captured > from > > serial > > > console. > > > > > >>>> > > > > > >>>> Machine does not boot after > compiling xen > > 3.4.3 > > > with > > > > pv_ops dom > > > > > 0 kernel. > > > > > >>>> > > > > > >>>> Please let me know what is going > wrong > > here. > > > > > >>>> > > > > > >>>> > > > > > >>> Ok this looks like a bug that is already > being > > sorted > > > out on > > > > > xen-devel mailinglist. > > > > > >>> I added CC to xen-devel. > > > > > >>> > > > > > >>> > > > > > >> > > > > > > > > > > > > Those messages are not a problem in > themselves, > > but the > > > related > > > > > problem > > > > > > is believed to be fixed in current > > xen/stable-2.6.32.x. > > > It > > > > looks like > > > > > > the output stops there because the Xen > console > > isn't set > > > up > > > > properly > > > > > for > > > > > > some reason. > > > > > > > > > > > > > > > > Yeah, remove "rhgb quiet" from the options.. > the > > dom0 > > > kernel > > > > cmdline > > > > > should be like this: > > > > > ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > earlyprintk=xen > > > > nomodeset > > > > > -- Pasi > > > > > > > > > > References > > > > > > > > > > Visible links > > > > > 1. > > > > > > [5][6][7][8]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > > 2. > > > > > > > > > > > [6][7][8][9]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > > 3. mailto:[7][8][9][10]pasik@xxxxxx > > > > > > > > References > > > > > > > > Visible links > > > > 1. mailto:[9][10][11]pasik@xxxxxx > > > > 2. > > > > > > [10][11][12]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 3. > > > > > > > [11][12][13]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 4. mailto:[12][13][14]pasik@xxxxxx > > > > 5. > > > > > > [13][14][15]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > > 6. > > > > > > > [14][15][16]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > > 7. mailto:[15][16][17]pasik@xxxxxx > > > > Asserting Post complete GPIO!!! > > > > Transfer control to CSM 16-bit binary for legacy boot > > > > __ __ _____ _ _ _____ _ _ > > > > \ \/ /___ _ __ |___ /| || | |___ / _ __ ___| || | > _ > > __ _ > > > __ ___ > > > > \ // _ \ '_ \ |_ \| || |_ |_ \ __| '__/ __| || > |_ __| > > '_ \| > > > '__/ _ \ > > > > / \ __/ | | | ___) |__ _| ___) |__| | | (__|__ > _|__| > > |_) | | > > > | __/ > > > > /_/\_\___|_| |_| |____(_) |_|(_)____/ |_| \___| |_| > | > > .__/|_| > > > \___| > > > > > |_| > > > > (XEN) Xen version 3.4.3-rc4-pre (kishore@localdomain) > (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) Mon Mar 15 13:44:31 PDT > 2010 > > > > (XEN) Latest ChangeSet: Tue Mar 09 18:15:52 2010 +0000 > > > 19924:6e72f8c3c017 > > > > (XEN) Command line: console=vga,com1 com1=115200,8n1 > msi=1 > > iommu=1 > > > > (XEN) Video information: > > > > (XEN) VGA is text mode 80x25, font 8x16 > > > > (XEN) VBE/DDC methods: none; EDID transfer time: 0 > seconds > > > > (XEN) EDID info not retrieved because no DDC retrieval > method > > > detected > > > > (XEN) Disc information: > > > > (XEN) Found 1 MBR signatures > > > > (XEN) Found 1 EDD information structures > > > > (XEN) Xen-e820 RAM map: > > > > (XEN) 0000000000000000 - 000000000009d000 (usable) > > > > (XEN) 000000000009d000 - 00000000000a0000 (reserved) > > > > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > > > > (XEN) 0000000000100000 - 000000006d597000 (usable) > > > > (XEN) 000000006d597000 - 000000006d686000 (reserved) > > > > (XEN) 000000006d686000 - 000000006f598000 (usable) > > > > (XEN) 000000006f598000 - 000000006f59a000 (reserved) > > > > (XEN) 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > (XEN) 000000006f5af000 - 000000006f5d9000 (reserved) > > > > (XEN) 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > (XEN) 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > (XEN) 000000006f6df000 - 000000006f700000 (ACPI data) > > > > (XEN) 000000006f700000 - 0000000080000000 (reserved) > > > > (XEN) 00000000a0000000 - 00000000b0000000 (reserved) > > > > (XEN) 00000000fc000000 - 00000000fd000000 (reserved) > > > > (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) > > > > (XEN) 00000000ffc00000 - 0000000100000000 (reserved) > > > > (XEN) System RAM: 1780MB (1823000kB) > > > > (XEN) ACPI: RSDP 000F03F0, 0024 (r2 INTEL ) > > > > (XEN) ACPI: XSDT 6F6FE120, 0064 (r1 INTEL THRLY > 0 > > > 1000013) > > > > (XEN) ACPI: FACP 6F6FD000, 00F4 (r4 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: DSDT 6F6F5000, 74F1 (r2 INTEL THRLY > 3 > > MSFT > > > 100000D) > > > > (XEN) ACPI: FACS 6F5F9000, 0040 > > > > (XEN) ACPI: APIC 6F6F4000, 01CC (r2 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: MCFG 6F6F3000, 003C (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: HPET 6F6F2000, 0038 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SLIT 6F6F1000, 0030 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) ACPI: WDDT 6F6F0000, 0040 (r1 INTEL THRLY > 0 > > MSFT > > > 100000D) > > > > (XEN) ACPI: SSDT 6F5D9000, 1FDDC (r1 INTEL SSDT PM > 4000 > > INTL > > > 20061109) > > > > (XEN) ACPI: DMAR 6F6EE000, 01D0 (r1 INTEL THRLY > 1 > > MSFT > > > 100000D) > > > > (XEN) Domain heap initialised > > > > (XEN) Processor #0 6:12 APIC version 21 > > > > (XEN) Processor #2 6:12 APIC version 21 > > > > (XEN) Processor #4 6:12 APIC version 21 > > > > (XEN) Processor #16 6:12 APIC version 21 > > > > (XEN) Processor #18 6:12 APIC version 21 > > > > (XEN) Processor #20 6:12 APIC version 21 > > > > (XEN) Processor #1 6:12 APIC version 21 > > > > (XEN) Processor #3 6:12 APIC version 21 > > > > (XEN) Processor #5 6:12 APIC version 21 > > > > (XEN) Processor #17 6:12 APIC version 21 > > > > (XEN) Processor #19 6:12 APIC version 21 > > > > (XEN) Processor #21 6:12 APIC version 21 > > > > (XEN) IOAPIC[0]: apic_id 8, version 32, address > 0xfec00000, GSI > > 0-23 > > > > (XEN) IOAPIC[1]: apic_id 9, version 32, address > 0xfec90000, GSI > > 24-47 > > > > (XEN) Enabling APIC mode: Phys. Using 2 I/O APICs > > > > (XEN) Intel VT-d DMAR tables have been parsed. > > > > (XEN) Using scheduler: SMP Credit Scheduler (credit) > > > > (XEN) Detected 3200.207 MHz processor. > > > > (XEN) VMX: Supported advanced features: > > > > (XEN) - APIC MMIO access virtualisation > > > > (XEN) - APIC TPR shadow > > > > (XEN) - Extended Page Tables (EPT) > > > > (XEN) - Virtual-Processor Identifiers (VPID) > > > > (XEN) - Virtual NMI > > > > (XEN) - MSR direct-access bitmap > > > > (XEN) VMX: EPT is available. > > > > (XEN) VMX: VPID is available. > > > > (XEN) HVM: VMX enabled > > > > (XEN) HVM: Hardware Assisted Paging detected. > > > > (XEN) CPU0: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 1/2 eip 88000 > > > > (XEN) CPU1: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 2/4 eip 88000 > > > > (XEN) CPU2: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 3/16 eip 88000 > > > > (XEN) CPU3: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 4/18 eip 88000 > > > > (XEN) CPU4: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 5/20 eip 88000 > > > > (XEN) CPU5: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 6/1 eip 88000 > > > > (XEN) CPU6: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 7/3 eip 88000 > > > > (XEN) CPU7: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 8/5 eip 88000 > > > > (XEN) CPU8: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 9/17 eip 88000 > > > > (XEN) CPU9: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 10/19 eip 88000 > > > > (XEN) CPU10: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Booting processor 11/21 eip 88000 > > > > (XEN) CPU11: Intel Genuine Intel(R) CPU 000 > @ > > 3.20GHz > > > stepping 00 > > > > (XEN) Total of 12 processors activated. > > > > (XEN) ENABLING IO-APIC IRQs > > > > (XEN) -> Using new ACK method > > > > (XEN) checking TSC synchronization across 12 CPUs: > passed. > > > > (XEN) Platform timer is 14.318MHz HPET > > > > ?(XEN) Brought up 12 CPUs > > > > (XEN) Intel VT-d Snoop Control supported. > > > > (XEN) Intel VT-d DMA Passthrough not supported. > > > > (XEN) Intel VT-d Queued Invalidation supported. > > > > (XEN) Intel VT-d Interrupt Remapping supported. > > > > (XEN) I/O virtualisation enabled > > > > (XEN) I/O virtualisation for PV guests disabled > > > > (XEN) xenoprof: Initialization failed. Intel processor > model 44 > > for P6 > > > class family is not supported > > > > (XEN) *** LOADING DOMAIN 0 *** > > > > (XEN) Xen kernel: 64-bit, lsb, compat32 > > > > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> > > 0x26bb000 > > > > (XEN) PHYSICAL MEMORY ARRANGEMENT: > > > > (XEN) Dom0 alloc.: 0000000064000000->0000000068000000 > > (404490 pages > > > to be allocated) > > > > (XEN) VIRTUAL MEMORY ARRANGEMENT: > > > > (XEN) Loaded kernel: ffffffff81000000->ffffffff826bb000 > > > > (XEN) Init. ramdisk: ffffffff826bb000->ffffffff82d0d800 > > > > (XEN) Phys-Mach map: ffffffff82d0e000->ffffffff83044050 > > > > (XEN) Start info: ffffffff83045000->ffffffff830454b4 > > > > (XEN) Page tables: ffffffff83046000->ffffffff83063000 > > > > (XEN) Boot stack: ffffffff83063000->ffffffff83064000 > > > > (XEN) TOTAL: ffffffff80000000->ffffffff83400000 > > > > (XEN) ENTRY ADDRESS: ffffffff819c1200 > > > > (XEN) Dom0 has maximum 12 VCPUs > > > > (XEN) Scrubbing Free RAM: .done. > > > > (XEN) Xen trace buffers: disabled > > > > (XEN) Std. Loglevel: Errors and warnings > > > > (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and > > warnings) > > > > (XEN) Xen is relinquishing VGA console. > > > > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three > times to > > switch > > > input to Xen) > > > > (XEN) Freed 128kB init memory. > > > > mapping kernel into physical memory > > > > Xen: setup ISA identity maps > > > > about to get started... > > > > Initializing cgroup subsys cpuset > > > > Initializing cgroup subsys cpu > > > > Linux version 2.6.32.9 (kishore@xxxxxxxxxxxxxxxxxxxxx) > (gcc > > version > > > 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Mon Mar 15 > 15:16:28 PDT > > 2010 > > > > Command line: ro root=/dev/VolGroup01/LogVol00 > console=hvc0 > > > earlyprintk=xen nomodeset > > > > KERNEL supported cpus: > > > > Intel GenuineIntel > > > > AMD AuthenticAMD > > > > Centaur CentaurHauls > > > > BIOS-provided physical RAM map: > > > > Xen: 0000000000000000 - 000000000009d000 (usable) > > > > Xen: 000000000009d000 - 0000000000100000 (reserved) > > > > Xen: 0000000000100000 - 0000000066c0a000 (usable) > > > > Xen: 000000006d597000 - 000000006d686000 (reserved) > > > > Xen: 000000006f598000 - 000000006f59a000 (reserved) > > > > Xen: 000000006f59a000 - 000000006f5af000 (ACPI NVS) > > > > Xen: 000000006f5af000 - 000000006f5d9000 (reserved) > > > > Xen: 000000006f5d9000 - 000000006f5f9000 (ACPI data) > > > > Xen: 000000006f5f9000 - 000000006f6df000 (ACPI NVS) > > > > Xen: 000000006f6df000 - 000000006f700000 (ACPI data) > > > > Xen: 000000006f700000 - 0000000080000000 (reserved) > > > > Xen: 00000000a0000000 - 00000000b0000000 (reserved) > > > > Xen: 00000000fc000000 - 00000000fd000000 (reserved) > > > > Xen: 00000000fed1c000 - 00000000fed20000 (reserved) > > > > Xen: 00000000ffc00000 - 0000000100000000 (reserved) > > > > bootconsole [xenboot0] enabled > > > > DMI 2.4 present. > > > > last_pfn = 0x66c0a max_arch_pfn = 0x400000000 > > > > init_memory_mapping: 0000000000000000-0000000066c0a000 > > > > RAMDISK: 026bb000 - 02d0d800 > > > > ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL ) > > > > ACPI: XSDT 000000006f6fe120 00064 (v01 INTEL THRLY > 00000000 > > > 01000013) > > > > ACPI: FACP 000000006f6fd000 000F4 (v04 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: DSDT 000000006f6f5000 074F1 (v02 INTEL THRLY > 00000003 > > MSFT > > > 0100000D) > > > > ACPI: FACS 000000006f5f9000 00040 > > > > ACPI: APIC 000000006f6f4000 001CC (v02 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: MCFG 000000006f6f3000 0003C (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: HPET 000000006f6f2000 00038 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: SLIT 000000006f6f1000 00030 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > ACPI: WDDT 000000006f6f0000 00040 (v01 INTEL THRLY > 00000000 > > MSFT > > > 0100000D) > > > > ACPI: SSDT 000000006f5d9000 1FDDC (v01 INTEL SSDT PM > 00004000 > > INTL > > > 20061109) > > > > ACPI: 000000006f6ee000 001D0 (v01 INTEL THRLY > 00000001 > > MSFT > > > 0100000D) > > > > No NUMA configuration found > > > > Faking a node at 0000000000000000-0000000066c0a000 > > > > Bootmem setup node 0 0000000000000000-0000000066c0a000 > > > > NODE_DATA [0000000000008000 - 000000000001ffff] > > > > bootmap [0000000000020000 - 000000000002cd87] pages d > > > > (9 early reservations) ==> bootmem [0000000000 - > 0066c0a000] > > > > #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 > > - > > > 0000001000] > > > > #1 [0003046000 - 0003063000] XEN PAGETABLES ==> > [0003046000 > > - > > > 0003063000] > > > > #2 [0000006000 - 0000008000] TRAMPOLINE ==> > [0000006000 > > - > > > 0000008000] > > > > #3 [0001000000 - 000269ae98] TEXT DATA BSS ==> > [0001000000 > > - > > > 000269ae98] > > > > #4 [00026bb000 - 0002d0d800] RAMDISK ==> > [00026bb000 > > - > > > 0002d0d800] > > > > #5 [0002d0e000 - 0003046000] XEN START INFO ==> > [0002d0e000 > > - > > > 0003046000] > > > > #6 [000269b000 - 000269b011] BRK ==> > [000269b000 > > - > > > 000269b011] > > > > #7 [0000100000 - 000041a000] PGTABLE ==> > [0000100000 > > - > > > 000041a000] > > > > #8 [0000001000 - 0000001030] ACPI SLIT ==> > [0000001000 > > - > > > 0000001030] > > > > found SMP MP-table at [ffff8800000fd750] fd750 > > > > Zone PFN ranges: > > > > DMA 0x00000000 -> 0x00001000 > > > > DMA32 0x00001000 -> 0x00100000 > > > > Normal 0x00100000 -> 0x00100000 > > > > Movable zone start PFN for each node > > > > early_node_map[2] active PFN ranges > > > > 0: 0x00000000 -> 0x0000009d > > > > 0: 0x00000100 -> 0x00066c0a > > > > ACPI: PM-Timer IO Port: 0x408 > > > > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) > > > > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) > > > > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled) > > > > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled) > > > > ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) > > > > ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled) > > > > ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) > > > > ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled) > > > > ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled) > > > > ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled) > > > > ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled) > > > > ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled) > > > > ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled) > > > > ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1]) > > > > ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1]) > > > > ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) > > > > IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI > 0-0 > > > > ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24]) > > > > IOAPIC[1]: apic_id 9, version 0, address 0xfec90000, GSI > 24-24 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ERROR: Unable to locate IOAPIC for GSI 2 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > > > > ERROR: Unable to locate IOAPIC for GSI 9 > > > > Using ACPI (MADT) for SMP configuration information > > > > ACPI: HPET id: 0x8086a401 base: 0xfed00000 > > > > SMP: Allowing 12 CPUs, 0 hotplug CPUs > > > > PM: Registered nosave memory: 000000000009d000 - > > 0000000000100000 > > > > Allocating PCI resources starting at b0000000 (gap: > > b0000000:4c000000) > > > > Booting paravirtualized kernel on Xen > > > > Xen version: 3.4.3-rc4-pre (preserve-AD) (dom0) > > > > NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 > nr_node_ids:1 > > > > PERCPU: Embedded 478 pages/cpu @ffff880005ebc000 > s1928024 r8192 > > d21672 > > > u1957888 > > > > pcpu-alloc: s1928024 r8192 d21672 u1957888 > alloc=478*4096 > > > > pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 > [0] 06 > > [0] 07 > > > > pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 > > > > Xen: using vcpu_info placement > > > > Built 1 zonelists in Node order, mobility grouping on. > Total > > pages: > > > 409291 > > > > Policy zone: DMA32 > > > > Kernel command line: ro root=/dev/VolGroup01/LogVol00 > > console=hvc0 > > > earlyprintk=xen nomodeset > > > > PID hash table entries: 4096 (order: 3, 32768 bytes) > > > > Initializing CPU#0 > > > > DMA: Placing 64MB software IO TLB between > ffff880007525000 - > > > ffff88000b525000 > > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 > > > > xen_swiotlb_fixup: buf=ffff880007525000 size=67108864 > > > > xen_swiotlb_fixup: buf=ffff88000b585000 size=32768 > > > > Memory: 1514268k/1683496k available (4654k kernel code, > 396k > > absent, > > > 168832k reserved, 3443k data, 3396k init) > > > > SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, > > CPUs=12, > > > Nodes=1 > > > > Hierarchical RCU implementation. > > > > NR_IRQS:4352 nr_irqs:3072 > > > > Already setup the GSI :0 > > > > Already setup the GSI :1 > > > > Already setup the GSI :2 > > > > Already setup the GSI :3 > > > > Already setup the GSI :4 > > > > Already setup the GSI :5 > > > > Already setup the GSI :6 > > > > Already setup the GSI :7 > > > > Already setup the GSI :8 > > > > Already setup the GSI :9 > > > > Already setup the GSI :10 > > > > Already setup the GSI :11 > > > > Already setup the GSI :12 > > > > Already setup the GSI :13 > > > > Already setup the GSI :14 > > > > Already setup the GSI :15 > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > > > > xen: sci override: source_irq=9 global_irq=9 trigger=c > > polarity=1 > > > > xen_allocate_pirq: returning irq 9 for gsi 9 > > > > Already setup the GSI :9 > > > > xen: acpi sci 9 > > > > Console: colour VGA+ 80x25 > > > > console [hvc0] enabled, bootconsole disabled console > [hvc0] > > enabled, > > > bootconsole disabled > > > > Lock dependency validator: Copyright (c) 2006 Red Hat, > Inc., > > Ingo > > > Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: > > 48 > > > ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: > > 4096 ... > > > MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: > 32768 > > ... > > > CHAINHASH_SIZE: 16384 memory used by lock > dependency > > info: > > > 6367 kB per task-struct memory footprint: 2688 bytes > allocated > > 17039360 > > > bytes of page_cgroup please try 'cgroup_disable=memory' > option if > > you > > > don't want memory cgroups installing Xen timer for CPU 0 > Detected > > > 3200.206 MHz processor. Calibrating delay loop (skipped), > value > > > calculated using timer frequency.. 6400.41 BogoMIPS > (lpj=3200206) > > > Security Framework initialized SELinux: Initializing. > Dentry > > cache hash > > > table entries: 262144 (order: 9, 2097152 bytes) > Inode-cache hash > > table > > > entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash > table > > > entries: 256 Initializing cgroup subsys ns Initializing > cgroup > > subsys > > > cpuacct Initializing cgroup subsys memory Initializing > cgroup > > subsys > > > devices Initializing cgroup subsys freezer Initializing > cgroup > > subsys > > > net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 > cache: 256K > > CPU: > > > L3 cache: 12288K CPU 0/0x0 -> Node 0 CPU: Unsupported > number of > > siblings > > > 32 Performance Events: unsupported p6 CPU model 44 no PMU > driver, > > > software events only. lockdep: fixing up alternatives. SMP > > alternatives: > > > switching to UP code ACPI: Core revision 20090903 ftrace: > > converting > > > mcount calls to 0f 1f 44 00 00 ftrace: allocating 27971 > entries > > in 110 > > > pages installing Xen timer for CPU 1 lockdep: fixing up > > alternatives. > > > SMP alternatives: switching to SMP code Initializing CPU#1 > CPU: > > L1 I > > > cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 1/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 2 Initializing CPU#2 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 2/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 3 > > > Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 3/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 4 Initializing > CPU#4 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 4/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 5 Initializing CPU#5 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 5/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 6 > > > Initializing CPU#6 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 6/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 7 Initializing > CPU#7 > > CPU: L1 > > > I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 > cache: > > 12288K > > > CPU 7/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > > installing > > > Xen timer for CPU 8 Initializing CPU#8 CPU: L1 I cache: > 32K, L1 D > > cache: > > > 32K CPU: L2 cache: 256K CPU: L3 cache: 12288K CPU 8/0x0 -> > Node 0 > > CPU: > > > Unsupported number of siblings 32 installing Xen timer for > CPU 9 > > > Initializing CPU#9 CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 > > cache: > > > 256K CPU: L3 cache: 12288K CPU 9/0x0 -> Node 0 CPU: > Unsupported > > number > > > of siblings 32 installing Xen timer for CPU 10 > Initializing > > CPU#10 CPU: > > > L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: > L3 > > cache: > > > 12288K CPU 10/0x0 -> Node 0 CPU: Unsupported number of > siblings > > 32 > > > installing Xen timer for CPU 11 Initializing CPU#11 CPU: > L1 I > > cache: > > > 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: > 12288K > > CPU > > > 11/0x0 -> Node 0 CPU: Unsupported number of siblings 32 > Brought > > up 12 > > > CPUs Grant table initialized regulator: core version 0.5 > Time: > > 14:45:00 > > > Date: 03/16/10 NET: Registered protocol family 16 > > xenbus_probe_init ok > > > ACPI FADT declares the system doesn't support PCIe ASPM, > so > > disable it > > > ACPI: bus type pci registered PCI: MCFG configuration 0: > base > > a0000000 > > > segment 0 buses 0 - 255 PCI: MCFG area at a0000000 > reserved in > > E820 PCI: > > > Using MMCONFIG at a0000000 - afffffff PCI: Using > configuration > > type 1 > > > for base access bio: create slab <bio-0> at 0 ACPI Error: > Field > > [CPB3] > > > at 96 exceeds Buffer [NULL] size 64 (bits) > > (20090903/dsopcode-596) ACPI > > > Error (psparse-0537): Method parse/execution failed > [\_SB_._OSC] > > (Node > > > ffff880064e00c98), AE_AML_BUFFER_LIMIT ACPI: Interpreter > enabled > > ACPI: > > > (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt > > routing ACPI > > > Warning: Incorrect checksum in table [ ] - 97, should > be DB > > > (20090903/tbutils-314) ACPI: No dock devices found. ACPI: > PCI > > Root > > > Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported > from D0 > > D3hot > > > D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: > PME# > > supported > > > from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci > > 0000:00:03.0: > > > PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# > > disabled pci > > > 0000:00:04.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:04.0: PME# > > > disabled pci 0000:00:05.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:05.0: PME# disabled pci 0000:00:06.0: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:06.0: PME# disabled pci > 0000:00:07.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:07.0: PME# > disabled > > pci > > > 0000:00:08.0: PME# supported from D0 D3hot D3cold pci > > 0000:00:08.0: PME# > > > disabled pci 0000:00:09.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:0a.0: PME# disabled pci > 0000:00:13.0: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:13.0: PME# > disabled > > pci > > > 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1a.7: PME# > > > disabled pci 0000:00:1c.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:00:1c.4: PME# disabled pci > 0000:00:1c.5: > > PME# > > > supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# > disabled > > pci > > > 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci > > 0000:00:1d.7: PME# > > > disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed > by > > ICH6 > > > ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f > claimed > > by ICH6 > > > GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at > 0680 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO > at 0ca0 > > (mask > > > 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO > at 0600 > > (mask > > > 001f) pci 0000:00:1f.2: PME# supported from D3hot pci > > 0000:00:1f.2: PME# > > > disabled pci 0000:01:00.0: PME# supported from D0 D3hot > D3cold > > pci > > > 0000:01:00.0: PME# disabled pci 0000:01:00.1: PME# > supported from > > D0 > > > D3hot D3cold pci 0000:01:00.1: PME# disabled pci > 0000:0c:00.0: > > disabling > > > ASPM on pre-1.1 PCIe device. You can enable it with > > 'pcie_aspm=force' > > > pci 0000:00:1e.0: transparent bridge ACPI: PCI Root Bridge > [PCI1] > > > (0000:fe) ACPI: PCI Root Bridge [PCI2] (0000:ff) ACPI: PCI > > Interrupt > > > Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI > > Interrupt Link > > > [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI > Interrupt > > Link > > > [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. > ACPI: PCI > > > Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: > > PCI > > > Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) > *0, > > disabled. > > > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 > 12 14 > > 15) > > > xenbus_probe_backend_init bus registered ok > > xenbus_probe_frontend_init > > > bus registered ok xen_balloon: Initialising balloon driver > with > > page > > > order 0. vgaarb: device added: > > > PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none > vgaarb: > > loaded > > > SCSI subsystem initialized usbcore: registered new > interface > > driver > > > usbfs usbcore: registered new interface driver hub > usbcore: > > registered > > > new device driver usb PCI: Using ACPI for IRQ routing > NetLabel: > > > Initializing NetLabel: domain hash size = 128 NetLabel: > > protocols = > > > UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by > default > > > Switching to clocksource xen kstop/0 used greatest stack > depth: > > 6568 > > > bytes left kstop/1 used greatest stack depth: 6536 bytes > left > > pnp: PnP > > > ACPI init ACPI: bus type pnp registered xen_allocate_pirq: > > returning irq > > > 8 for gsi 8 Already setup the GSI :8 xen_allocate_pirq: > returning > > irq 13 > > > for gsi 13 Already setup the GSI :13 pnp: PnP ACPI: found > 13 > > devices > > > ACPI: ACPI bus type pnp unregistered system 00:07: ioport > range > > > 0x500-0x53f has been reserved system 00:07: ioport range > > 0x400-0x47f has > > > been reserved system 00:07: ioport range 0x800-0x81f has > been > > reserved > > > system 00:07: ioport range 0x2f8-0x2ff has been reserved > system > > 00:07: > > > iomem range 0xfed1c000-0xfed8bffe could not be reserved > system > > 00:07: > > > iomem range 0xff000000-0xffffffff could not be reserved > system > > 00:07: > > > iomem range 0xfee00000-0xfeefffff has been reserved system > 00:07: > > iomem > > > range 0xfe900000-0xfe90001f has been reserved system > 00:07: iomem > > range > > > 0xfea00000-0xfea0001f has been reserved system 00:07: > iomem range > > > 0xfed1b000-0xfed1bfff has been reserved pci 0000:0c:00.0: > BAR 6: > > no > > > parent found for of device [0xffff0000-0xffffffff] pci > > 0000:00:01.0: PCI > > > bridge, secondary bus 0000:01 pci 0000:00:01.0: IO > window: > > > 0x1000-0x1fff pci 0000:00:01.0: MEM window: > > 0xb1900000-0xb19fffff pci > > > 0000:00:01.0: PREFETCH window: disabled pci > 0000:00:02.0: PCI > > bridge, > > > secondary bus 0000:02 pci 0000:00:02.0: IO window: > disabled pci > > > 0000:00:02.0: MEM window: disabled pci 0000:00:02.0: > PREFETCH > > > window: disabled pci 0000:00:03.0: PCI bridge, secondary > bus > > 0000:03 pci > > > 0000:00:03.0: IO window: disabled pci 0000:00:03.0: > MEM > > window: > > > disabled pci 0000:00:03.0: PREFETCH window: disabled pci > > 0000:00:04.0: > > > PCI bridge, secondary bus 0000:04 pci 0000:00:04.0: IO > window: > > > disabled pci 0000:00:04.0: MEM window: disabled pci > > 0000:00:04.0: > > > PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, > secondary > > bus > > > 0000:05 pci 0000:00:05.0: IO window: disabled pci > 0000:00:05.0: > > MEM > > > window: disabled pci 0000:00:05.0: PREFETCH window: > disabled > > pci > > > 0000:00:06.0: PCI bridge, secondary bus 0000:06 pci > 0000:00:06.0: > > IO > > > window: disabled pci 0000:00:06.0: MEM window: disabled > pci > > > 0000:00:06.0: PREFETCH window: disabled pci > 0000:00:07.0: PCI > > bridge, > > > secondary bus 0000:07 pci 0000:00:07.0: IO window: > disabled pci > > > 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: > PREFETCH > > > window: disabled pci 0000:00:08.0: PCI bridge, secondary > bus > > 0000:08 pci > > > 0000:00:08.0: IO window: disabled pci 0000:00:08.0: > MEM > > window: > > > disabled pci 0000:00:08.0: PREFETCH window: disabled pci > > 0000:00:09.0: > > > PCI bridge, secondary bus 0000:09 pci 0000:00:09.0: IO > window: > > > 0x3000-0x3fff pci 0000:00:09.0: MEM window: > > 0xb1b00000-0xb1cfffff pci > > > 0000:00:09.0: PREFETCH window: > > 0x000000b1d00000-0x000000b1efffff pci > > > 0000:00:0a.0: PCI bridge, secondary bus 0000:0a pci > 0000:00:0a.0: > > IO > > > window: disabled pci 0000:00:0a.0: MEM window: disabled > pci > > > 0000:00:0a.0: PREFETCH window: disabled pci > 0000:00:1c.0: PCI > > bridge, > > > secondary bus 0000:0b pci 0000:00:1c.0: IO window: > disabled pci > > > 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: > PREFETCH > > > window: disabled pci 0000:00:1c.4: PCI bridge, secondary > bus > > 0000:0c pci > > > 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: > MEM > > window: > > > 0xb1000000-0xb18fffff pci 0000:00:1c.4: PREFETCH window: > > > 0x000000b0000000-0x000000b0ffffff pci 0000:00:1c.5: PCI > bridge, > > > secondary bus 0000:0d pci 0000:00:1c.5: IO window: > disabled pci > > > 0000:00:1c.5: MEM window: disabled pci 0000:00:1c.5: > PREFETCH > > > window: disabled pci 0000:00:1e.0: PCI bridge, secondary > bus > > 0000:0e pci > > > 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: > MEM > > window: > > > disabled pci 0000:00:1e.0: PREFETCH window: disabled pci > > 0000:00:01.0: > > > PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci > 0000:00:02.0: PCI > > INT A > > > -> GSI 29 (level, low) -> IRQ 29 pci 0000:00:03.0: PCI INT > A -> > > GSI 24 > > > (level, low) -> IRQ 24 pci 0000:00:04.0: PCI INT A -> GSI > 25 > > (level, > > > low) -> IRQ 25 pci 0000:00:05.0: PCI INT A -> GSI 26 > (level, low) > > -> IRQ > > > 26 pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> > IRQ 27 > > pci > > > 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 > pci > > > 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 > pci > > > 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 > pci > > > 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 > pci > > > 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > > xen_allocate_pirq: returning irq 16 for gsi 16 Already > setup the > > GSI :16 > > > pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 pci > > > 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > NET: > > Registered > > > protocol family 2 IP route cache hash table entries: 65536 > > (order: 7, > > > 524288 bytes) TCP established hash table entries: 262144 > (order: > > 10, > > > 4194304 bytes) TCP bind hash table entries: 65536 (order: > 10, > > 4718592 > > > bytes) TCP: Hash tables configured (established 262144 > bind > > 65536) TCP > > > reno registered NET: Registered protocol family 1 pci > > 0000:01:00.0: > > > Disabling L0s pci 0000:01:00.1: Disabling L0s Trying to > unpack > > rootfs > > > image as initramfs... Freeing initrd memory: 6474k freed > DMA-API: > > > preallocated 32768 debug entries DMA-API: debugging > enabled by > > kernel > > > config PCI-DMA: Using software bounce buffering for IO > (SWIOTLB) > > DMA: > > > Placing 64MB software IO TLB between ffff880007525000 - > > ffff88000b525000 > > > DMA: software IO TLB at phys 0x7525000 - 0xb525000 audit: > > initializing > > > netlink socket (disabled) type=2000 > audit(1268750702.035:1): > > initialized > > > HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: > > Disk > > > quotas dquot_6.5.2 Dquot-cache hash table entries: 512 > (order 0, > > 4096 > > > bytes) msgmni has been set to 2970 cryptomgr_test used > greatest > > stack > > > depth: 5864 bytes left cryptomgr_test used greatest stack > depth: > > 5816 > > > bytes left alg: No test for stdrng (krng) Block layer SCSI > > generic (bsg) > > > driver version 0.4 loaded (major 252) io scheduler noop > > registered io > > > scheduler anticipatory registered io scheduler deadline > > registered io > > > scheduler cfq registered (default) pci_hotplug: PCI Hot > Plug PCI > > Core > > > version: 0.5 pciehp 0000:00:09.0:pcie04: HPC vendor_id > 8086 > > device_id > > > 3410 ss_vid 0 ss_did 0 pciehp: PCI Express Hot Plug > Controller > > Driver > > > version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver > > version: 0.5 > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > acpiphp_glue: Slot 2 already registered by another hotplug > driver > > > pci-stub: invalid id string "" input: Sleep Button as > > > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 > ACPI: > > Sleep > > > Button [SLPB] input: Power Button as > > > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power > Button > > [PWRF] > > > registering netback hpet_acpi_add: no address or irqs in > _CRS > > > Non-volatile memory driver v1.3 Linux agpgart interface > v0.103 > > Serial: > > > 8250/16550 driver, 4 ports, IRQ sharing enabled > serial8250: ttyS1 > > at I/O > > > 0x2f8 (irq = 3) is a 16550A brd: module loaded loop: > module > > loaded > > > input: Macintosh mouse button emulation as > > /devices/virtual/input/input2 > > > ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ > 19 > > ahci > > > 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f > impl > > SATA mode > > > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio > slum part > > ccc > > > ems scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci > scsi4 : > > ahci > > > scsi5 : ahci ata1: SATA max UDMA/133 irq_stat 0x00400040, > > connection > > > status changed irq 2996 ata2: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00180 irq 2996 ata3: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00200 irq 2996 ata4: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00280 irq 2996 ata5: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00300 irq 2996 ata6: SATA max UDMA/133 abar > > m2048@0xb1a00000 > > > port 0xb1a00380 irq 2996 Fixed MDIO Bus: probed ehci_hcd: > USB 2.0 > > > 'Enhanced' Host Controller (EHCI) Driver ehci_hcd > 0000:00:1a.7: > > PCI INT > > > C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: > EHCI > > Host > > > Controller ehci_hcd 0000:00:1a.7: new USB bus registered, > > assigned bus > > > number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd > > 0000:00:1a.7: irq > > > 18, io mem 0xb1a02000 ehci_hcd 0000:00:1a.7: USB 2.0 > started, > > EHCI 1.00 > > > usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 usb > > usb1: > > > New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb > > usb1: > > > Product: EHCI Host Controller usb usb1: Manufacturer: > Linux > > 2.6.32.9 > > > ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: > > configuration #1 > > > chosen from 1 choice hub 1-0:1.0: USB hub found hub > 1-0:1.0: 6 > > ports > > > detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 > (level, low) > > -> IRQ > > > 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd > > 0000:00:1d.7: > > > new USB bus registered, assigned bus number 2 ehci_hcd > > 0000:00:1d.7: > > > debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem > 0xb1a01000 > > ehci_hcd > > > 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB > device > > found, > > > idVendor=1d6b, idProduct=0002 usb usb2: New USB device > strings: > > Mfr=3, > > > Product=2, SerialNumber=1 usb usb2: Product: EHCI Host > Controller > > usb > > > usb2: Manufacturer: Linux 2.6.32.9 ehci_hcd usb usb2: > > SerialNumber: > > > 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 > choice hub > > > 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected > ohci_hcd: > > USB 1.1 > > > 'Open' Host Controller (OHCI) Driver uhci_hcd: USB > Universal Host > > > Controller Interface driver xen_allocate_pirq: returning > irq 16 > > for gsi > > > 16 Already setup the GSI :16 uhci_hcd 0000:00:1a.0: PCI > INT A -> > > GSI 16 > > > (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned > bus > > number 3 > > > uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0 usb > usb3: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb3: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: > Product: UHCI > > Host > > > Controller usb usb3: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb3: > > > SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 > chosen from > > 1 > > > choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports > detected > > uhci_hcd > > > 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd > > > 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: > new USB > > bus > > > registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: > irq 21, > > io base > > > 0x000020c0 usb usb4: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb4: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb4: Product: UHCI Host Controller usb usb4: > Manufacturer: Linux > > > 2.6.32.9 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb > usb4: > > > configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub > found > > hub > > > 4-0:1.0: 2 ports detected xen_allocate_pirq: returning irq > 19 for > > gsi 19 > > > Already setup the GSI :19 uhci_hcd 0000:00:1a.2: PCI INT D > -> GSI > > 19 > > > (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1a.2: new USB bus registered, assigned > bus > > number 5 > > > uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0 usb > usb5: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb5: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: > Product: UHCI > > Host > > > Controller usb usb5: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb5: > > > SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 > chosen from > > 1 > > > choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports > detected > > > xen_allocate_pirq: returning irq 23 for gsi 23 Already > setup the > > GSI :23 > > > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > > > uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd > > 0000:00:1d.0: new > > > USB bus registered, assigned bus number 6 uhci_hcd > 0000:00:1d.0: > > irq 23, > > > io base 0x00002080 usb usb6: New USB device found, > idVendor=1d6b, > > > idProduct=0001 usb usb6: New USB device strings: Mfr=3, > > Product=2, > > > SerialNumber=1 usb usb6: Product: UHCI Host Controller usb > usb6: > > > Manufacturer: Linux 2.6.32.9 uhci_hcd usb usb6: > SerialNumber: > > > 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 > choice hub > > > 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected > > xen_allocate_pirq: > > > returning irq 19 for gsi 19 Already setup the GSI :19 > uhci_hcd > > > 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd > > > 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: > new USB > > bus > > > registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: > irq 19, > > io base > > > 0x00002060 usb usb7: New USB device found, idVendor=1d6b, > > idProduct=0001 > > > usb usb7: New USB device strings: Mfr=3, Product=2, > > SerialNumber=1 usb > > > usb7: Product: UHCI Host Controller usb usb7: > Manufacturer: Linux > > > 2.6.32.9 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb > usb7: > > > configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub > found > > hub > > > 7-0:1.0: 2 ports detected xen_allocate_pirq: returning irq > 18 for > > gsi 18 > > > Already setup the GSI :18 uhci_hcd 0000:00:1d.2: PCI INT C > -> GSI > > 18 > > > (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: UHCI Host > > Controller > > > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus > > number 8 > > > uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 usb > usb8: New > > USB > > > device found, idVendor=1d6b, idProduct=0001 usb usb8: New > USB > > device > > > strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: > Product: UHCI > > Host > > > Controller usb usb8: Manufacturer: Linux 2.6.32.9 uhci_hcd > usb > > usb8: > > > SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 > chosen from > > 1 > > > choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports > detected > > PNP: No > > > PS/2 controller found. Probing ports directly. i8042.c: No > > controller > > > found. mice: PS/2 mouse device common for all mice > rtc_cmos > > 00:03: RTC > > > can wake from S4 rtc_cmos 00:03: rtc core: registered > rtc_cmos as > > rtc0 > > > rtc0: alarms up to one month, y3k, 114 bytes nvram > device-mapper: > > > uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl > > (2009-04-01) > > > initialised: [16][17][18]dm-devel@xxxxxxxxxx cpuidle: > using governor > > ladder > > > cpuidle: using governor menu usbcore: registered new > interface > > driver > > > hiddev usbcore: registered new interface driver usbhid > usbhid: > > v2.6:USB > > > HID core driver nf_conntrack version 0.5.0 (16384 buckets, > 65536 > > max) > > > CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Please > > use > > > nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack > module > > option > > > or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > > ip_tables: (C) > > > 2000-2006 Netfilter Core Team TCP cubic registered > Initializing > > XFRM > > > netlink socket NET: Registered protocol family 17 > registered > > taskstats > > > version 1 No TPM chip found, activating TPM-bypass! > Magic > > number: > > > 2:902:788 pci 0000:00:16.6: hash matches rtc_cmos 00:03: > setting > > system > > > clock to 2010-03-16 14:45:05 UTC (1268750705) Initalizing > network > > drop > > > monitor service ata2: SATA link down (SStatus 0 SControl > 300) > > ata4: SATA > > > link down (SStatus 0 SControl 300) ata6: SATA link down > (SStatus > > 0 > > > SControl 300) ata5: SATA link down (SStatus 0 SControl > 300) ata3: > > SATA > > > link down (SStatus 0 SControl 300) usb 7-1: new low speed > USB > > device > > > using uhci_hcd and address 2 > > > ====================================================== [ > INFO: > > > SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] > 2.6.32.9 #1 > > > ------------------------------------------------------ > khubd/100 > > > [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: > > (&retval->lock){......}, > > > at: [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 and > this task > > is > > > already holding: (&uhci->lock){..-...}, at: > [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 which would create a new lock > > dependency: > > > (&uhci->lock){..-...} -> (&retval->lock){......} but > this new > > > dependency connects a SOFTIRQ-irq-safe lock: > > (&uhci->lock){..-...} ... > > > which became SOFTIRQ-irq-safe at: [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > [<ffffffff810693bd>] > > > run_timer_softirq+0x1a6/0x257 [<ffffffff810627e4>] > > > __do_softirq+0xe6/0x1bc [<ffffffff81013fac>] > > call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > [<ffffffff81062229>] > > > irq_exit+0x4a/0x89 [<ffffffff812bf9d9>] > > > xen_evtchn_do_upcall+0x156/0x172 [<ffffffff81013ffe>] > > > xen_do_hypervisor_callback+0x1e/0x30 to a > SOFTIRQ-irq-unsafe > > lock: > > > (purge_lock){+.+...} ... which became SOFTIRQ-irq-unsafe > at: ... > > > [<ffffffff8108eadc>] __lock_acquire+0x341/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff814853bc>] > > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > [<ffffffff8100e58c>] > > > xen_alloc_ptpage+0x51/0x82 [<ffffffff8100e5d0>] > > > xen_alloc_pud+0x13/0x15 [<ffffffff810fe3cf>] > > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > [<ffffffff8110c197>] > > > map_vm_area+0x34/0x47 [<ffffffff8110c2cf>] > > > __vmalloc_area_node+0x125/0x14d [<ffffffff8110c379>] > > > __vmalloc_node+0x82/0x91 [<ffffffff8110c4e9>] > > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > [<ffffffff819c1d99>] > > > start_kernel+0x3de/0x426 [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 [<ffffffff819c4d5d>] > > > xen_start_kernel+0x4b9/0x4c0 other info that might help > us debug > > this: > > > 2 locks held by khubd/100: #0: > (usb_address0_mutex){+.+...}, > > at: > > > [<ffffffff81354f5f>] hub_port_init+0x81/0x7e4 #1: > > > (&uhci->lock){..-...}, at: [<ffffffff8137aedd>] > > > uhci_urb_enqueue+0x46/0x7e3 the dependencies between > > SOFTIRQ-irq-safe > > > lock and the holding lock: -> (&uhci->lock){..-...} ops: 0 > { > > > IN-SOFTIRQ-W at: > [<ffffffff8108ea6d>] > > > __lock_acquire+0x2d2/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8137b6ac>] uhci_hub_status_data+0x32/0x17c > > > [<ffffffff8135a361>] usb_hcd_poll_rh_status+0x50/0x15a > > > [<ffffffff8135a479>] rh_timer_func+0xe/0x10 > > > [<ffffffff810693bd>] run_timer_softirq+0x1a6/0x257 > > > [<ffffffff810627e4>] __do_softirq+0xe6/0x1bc > > > [<ffffffff81013fac>] call_softirq+0x1c/0x30 > > > [<ffffffff81015794>] do_softirq+0x4b/0xa7 > > > [<ffffffff81062229>] irq_exit+0x4a/0x89 > > > [<ffffffff812bf9d9>] xen_evtchn_do_upcall+0x156/0x172 > > > [<ffffffff81013ffe>] > xen_do_hypervisor_callback+0x1e/0x30 > > > INITIAL USE at: > [<ffffffff8108eb29>] > > > __lock_acquire+0x38e/0xc07 > > [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 > > [<ffffffff8137c3d7>] > > > uhci_hub_control+0x74/0x401 > > [<ffffffff8135bdac>] > > > usb_hcd_submit_urb+0x7a6/0xa1e > > > [<ffffffff8135c6b2>] usb_submit_urb+0x297/0x2f1 > > > [<ffffffff8135d51f>] usb_start_wait_urb+0x54/0x1b1 > > > [<ffffffff8135d8a1>] usb_control_msg+0xee/0x113 > > > [<ffffffff81358922>] hub_probe+0x37c/0xfaa > > > [<ffffffff81360a35>] usb_probe_interface+0x15a/0x1f7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135e3ca>] usb_set_configuration+0x5b9/0x677 > > > [<ffffffff81367b85>] generic_probe+0x67/0xae > > > [<ffffffff813607b1>] usb_probe_device+0x7f/0x87 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077fa>] __device_attach+0x28/0x31 > > > [<ffffffff813066e7>] bus_for_each_drv+0x52/0x85 > > > [<ffffffff81307891>] device_attach+0x65/0x7c > > > [<ffffffff8130667e>] bus_probe_device+0x27/0x3e > > > [<ffffffff813045b3>] device_add+0x3ab/0x57d > > > [<ffffffff8135616e>] usb_new_device+0x154/0x201 > > > [<ffffffff8135b42e>] usb_add_hcd+0x4c5/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f403b>] uhci_hcd_init+0x88/0xc1 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key > at: > > > [<ffffffff8268de38>] __key.33456+0x0/0x8 ... acquired at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 the dependencies between the lock to > be > > acquired > > > and SOFTIRQ-irq-unsafe lock: -> (purge_lock){+.+...} ops: > 0 { > > > HARDIRQ-ON-W at: > [<ffffffff8108eaba>] > > > __lock_acquire+0x31f/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] > xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] > map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > > SOFTIRQ-ON-W at: > > > [<ffffffff8108eadc>] > > __lock_acquire+0x341/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] > vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] > start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] > > > x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] xen_start_kernel+0x4b9/0x4c0 > INITIAL USE > > at: > > > [<ffffffff8108eb29>] > > __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff814853bc>] > _spin_lock+0x36/0x6b > > > [<ffffffff8110aa20>] > > __purge_vmap_area_lazy+0x54/0x18a > > > [<ffffffff8110c82f>] > > vm_unmap_aliases+0x167/0x176 > > > [<ffffffff8100e58c>] > > xen_alloc_ptpage+0x51/0x82 > > > [<ffffffff8100e5d0>] > > xen_alloc_pud+0x13/0x15 > > > [<ffffffff810fe3cf>] > __pud_alloc+0x79/0xb3 > > > [<ffffffff8110bf76>] > > vmap_page_range_noflush+0x9a/0x264 > > > [<ffffffff8110c161>] > > vmap_page_range+0xe/0x10 > > > [<ffffffff8110c197>] > map_vm_area+0x34/0x47 > > > [<ffffffff8110c2cf>] > > __vmalloc_area_node+0x125/0x14d > > > [<ffffffff8110c379>] > > __vmalloc_node+0x82/0x91 > > > [<ffffffff8110c4e9>] > __vmalloc+0x20/0x22 > > > [<ffffffff819dfef1>] > > > alloc_large_system_hash+0x150/0x1fe > > > [<ffffffff819e28c5>] vfs_caches_init+0xa9/0x11d > > > [<ffffffff819c1d99>] start_kernel+0x3de/0x426 > > > [<ffffffff819c12c3>] x86_64_start_reservations+0xae/0xb2 > > > [<ffffffff819c4d5d>] > xen_start_kernel+0x4b9/0x4c0 } > > ... > > > key at: [<ffffffff81741ef8>] > purge_lock.27226+0x18/0x40 > > ... > > > acquired at: [<ffffffff8108f20c>] > __lock_acquire+0xa71/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > [<ffffffff814853bc>] > > > _spin_lock+0x36/0x6b [<ffffffff8110aa20>] > > > __purge_vmap_area_lazy+0x54/0x18a [<ffffffff8110c82f>] > > > vm_unmap_aliases+0x167/0x176 [<ffffffff8100d7ca>] > > > xen_create_contiguous_region+0x51/0x106 > [<ffffffff81250d84>] > > > xen_swiotlb_alloc_coherent+0x62/0xa6 > [<ffffffff8111188c>] > > > dma_pool_alloc+0x136/0x2a8 [<ffffffff81370efe>] > > > ehci_qh_alloc+0x44/0x107 [<ffffffff81373f5d>] > > > ehci_pci_setup+0x22a/0x9c1 [<ffffffff8135b18e>] > > > usb_add_hcd+0x225/0x69d [<ffffffff8136907b>] > > > usb_hcd_pci_probe+0x270/0x3b1 [<ffffffff8125a8ad>] > > > local_pci_probe+0x17/0x1b [<ffffffff8125b4c4>] > > > pci_device_probe+0xcb/0xf7 [<ffffffff81307635>] > > > driver_probe_device+0xf8/0x218 [<ffffffff813077ae>] > > > __driver_attach+0x59/0x7d [<ffffffff813069e1>] > > > bus_for_each_dev+0x54/0x83 [<ffffffff813073fd>] > > > driver_attach+0x21/0x23 [<ffffffff81306487>] > > > bus_add_driver+0xe1/0x26b [<ffffffff81307ad5>] > > > driver_register+0xa3/0x11a [<ffffffff8125b71b>] > > > __pci_register_driver+0x65/0xc2 [<ffffffff819f3ee0>] > > > ehci_hcd_init+0x7f/0xc0 [<ffffffff8100a07e>] > > > do_one_initcall+0x73/0x18b [<ffffffff819c1961>] > > > kernel_init+0x172/0x1cc [<ffffffff81013eaa>] > > child_rip+0xa/0x20 -> > > > (&retval->lock){......} ops: 0 { INITIAL USE at: > > > [<ffffffff8108eb29>] __lock_acquire+0x38e/0xc07 > > > [<ffffffff8108f46f>] lock_acquire+0xcd/0xf2 > > > [<ffffffff81485526>] _spin_lock_irqsave+0x4f/0x86 > > > [<ffffffff8111178c>] dma_pool_alloc+0x36/0x2a8 > > > [<ffffffff81370efe>] ehci_qh_alloc+0x44/0x107 > > > [<ffffffff81373f5d>] ehci_pci_setup+0x22a/0x9c1 > > > [<ffffffff8135b18e>] usb_add_hcd+0x225/0x69d > > > [<ffffffff8136907b>] usb_hcd_pci_probe+0x270/0x3b1 > > > [<ffffffff8125a8ad>] local_pci_probe+0x17/0x1b > > > [<ffffffff8125b4c4>] pci_device_probe+0xcb/0xf7 > > > [<ffffffff81307635>] driver_probe_device+0xf8/0x218 > > > [<ffffffff813077ae>] __driver_attach+0x59/0x7d > > > [<ffffffff813069e1>] bus_for_each_dev+0x54/0x83 > > > [<ffffffff813073fd>] driver_attach+0x21/0x23 > > > [<ffffffff81306487>] bus_add_driver+0xe1/0x26b > > > [<ffffffff81307ad5>] driver_register+0xa3/0x11a > > > [<ffffffff8125b71b>] __pci_register_driver+0x65/0xc2 > > > [<ffffffff819f3ee0>] ehci_hcd_init+0x7f/0xc0 > > > [<ffffffff8100a07e>] do_one_initcall+0x73/0x18b > > > [<ffffffff819c1961>] kernel_init+0x172/0x1cc > > > [<ffffffff81013eaa>] child_rip+0xa/0x20 } ... key > at: > > > [<ffffffff824dc3c4>] __key.24188+0x0/0x1c ... acquired > at: > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8108f46f>] > > > lock_acquire+0xcd/0xf2 [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > > hub_events+0x91e/0x11a2 [<ffffffff81358432>] > > hub_thread+0x25/0x199 > > > [<ffffffff8107b8fd>] kthread+0x6e/0x76 > [<ffffffff81013eaa>] > > > child_rip+0xa/0x20 stack backtrace: Pid: 100, comm: > khubd Not > > tainted > > > 2.6.32.9 #1 Call Trace: [<ffffffff8108cd50>] > > check_usage+0x331/0x345 > > > [<ffffffff81032d79>] ? pvclock_clocksource_read+0x47/0x80 > > > [<ffffffff8108cdc5>] check_irq_usage+0x61/0xc5 > > [<ffffffff8108f128>] > > > __lock_acquire+0x98d/0xc07 [<ffffffff8111008c>] ? > > > sys_swapoff+0x870/0x9d0 [<ffffffff8108f46f>] > > lock_acquire+0xcd/0xf2 > > > [<ffffffff8111178c>] ? dma_pool_alloc+0x36/0x2a8 > > [<ffffffff81485526>] > > > _spin_lock_irqsave+0x4f/0x86 [<ffffffff8111178c>] ? > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111178c>] > > > dma_pool_alloc+0x36/0x2a8 [<ffffffff8111a986>] ? > > init_object+0x73/0x7b > > > [<ffffffff8100ed81>] ? xen_force_evtchn_callback+0xd/0xf > > > [<ffffffff8100f452>] ? check_events+0x12/0x20 > > [<ffffffff8137aa7b>] > > > uhci_alloc_qh+0x33/0x146 [<ffffffff8111dda9>] ? > > > kmem_cache_alloc+0xd9/0x150 [<ffffffff8137af66>] > > > uhci_urb_enqueue+0xcf/0x7e3 [<ffffffff8135a29c>] ? > > > dma_map_single_attrs+0xb4/0xc6 [<ffffffff8135be92>] > > > usb_hcd_submit_urb+0x88c/0xa1e [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8108b9ea>] ? > > > lockdep_init_map+0x9f/0x115 [<ffffffff8135c6b2>] > > > usb_submit_urb+0x297/0x2f1 [<ffffffff8107beb6>] ? > > > __init_waitqueue_head+0x3a/0x4c [<ffffffff8135d51f>] > > > usb_start_wait_urb+0x54/0x1b1 [<ffffffff8100f452>] ? > > > check_events+0x12/0x20 [<ffffffff8135c939>] ? > > usb_alloc_urb+0x21/0x4b > > > [<ffffffff8135c907>] ? usb_init_urb+0x2a/0x3b > > [<ffffffff8135d8a1>] > > > usb_control_msg+0xee/0x113 [<ffffffff8111c5ef>] ? > > > kmem_cache_alloc_notrace+0xe8/0x111 [<ffffffff8135517a>] > ? > > > hub_port_init+0x29c/0x7e4 [<ffffffff813551fb>] > > > hub_port_init+0x31d/0x7e4 [<ffffffff81356d68>] > > hub_events+0x91e/0x11a2 > > > [<ffffffff8135840d>] ? hub_thread+0x0/0x199 > > [<ffffffff81358432>] > > > hub_thread+0x25/0x199 [<ffffffff8107bb4f>] ? > > > autoremove_wake_function+0x0/0x3d [<ffffffff8107b8fd>] > > > kthread+0x6e/0x76 [<ffffffff81013eaa>] child_rip+0xa/0x20 > > > [<ffffffff8104edcf>] ? finish_task_switch+0x0/0xcc > > > [<ffffffff81013810>] ? restore_args+0x0/0x30 > > [<ffffffff8107b9f2>] ? > > > kthreadd+0xed/0x10f [<ffffffff81013ea0>] ? > child_rip+0x0/0x20 > > ata1: > > > SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: > ATA-8: > > Hitachi > > > HDT721025SLA380, STBOA3AA, max UDMA/133 ata1.00: 488397168 > > sectors, > > > multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured > for > > UDMA/133 > > > scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 > STBO > > PQ: 0 > > > ANSI: 5 sd 0:0:0:0: [sda] 488397168 512-byte logical > blocks: (250 > > GB/232 > > > GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd > 0:0:0:0: > > [sda] > > > Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a > 00 00 sd > > > 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't > > > support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] > Attached > > SCSI disk > > > Freeing unused kernel memory: 3396k freed Write protecting > the > > kernel > > > read-only data: 6988k Red Hat nash version 5.1.19.6 > starting > > Mounting > > > proc filesystem Mounting sysfs filesystem Creating /dev > Creating > > initial > > > device nodes Setting up hotplug. usb 7-1: New USB device > found, > > > idVendor=0458, idProduct=0007 usb 7-1: New USB device > strings: > > Mfr=2, > > > Product=1, SerialNumber=0 usb 7-1: Product: Optical Mouse > usb > > 7-1: > > > Manufacturer: KYE usb 7-1: configuration #1 chosen from 1 > choice > > input: > > > KYE Optical Mouse as > > > > /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input3 > > > generic-usb 0003:0458:0007.0001: input,hidraw0: USB HID > v1.10 > > Mouse [KYE > > > Optical Mouse] on usb-0000:00:1d.1-1/input0 Creating block > device > > nodes. > > > Loading aacraid.ko module Adaptec aacraid driver > 1.1-5[2461]-ms > > Scanning > > > and configuring dmraid supported devices Scanning logical > volumes > > > Reading all physical volumes. This may take a while... > > Activating > > > logical volumes Volume group "VolGroup01" not found > Trying to > > resume > > > from /dev/VolGroup01/LogVol01 Unable to access resume > device > > > (/dev/VolGroup01/LogVol01) Creating root device. Mounting > root > > > filesystem. mount: could not find filesystem '/dev/root' > Setting > > up > > > other filesystems. Setting up new root fs setuproot: > moving /dev > > failed: > > > No such file or directory no fstab.sys, mounting internal > > defaults > > > setuproot: error mounting /proc: No such file or directory > > setuproot: > > > error mounting /sys: No such file or directory Switching > to new > > root and > > > running init. unmounting old /dev unmounting old /proc > unmounting > > old > > > /sys switchroot: mount failed: No such file or directory > init > > used > > > greatest stack depth: 4088 bytes left Kernel panic - not > syncing: > > > Attempted to kill init! Pid: 1, comm: init Not tainted > 2.6.32.9 > > #1 Call > > > Trace: [<ffffffff8105b73f>] panic+0xa5/0x167 > > [<ffffffff8100ed81>] ? > > > xen_force_evtchn_callback+0xd/0xf [<ffffffff8105f2ab>] ? > > > do_exit+0x38a/0x701 [<ffffffff8100f43f>] ? > > > xen_restore_fl_direct_end+0x0/0x1 [<ffffffff8108f81b>] ? > > > lock_release+0x179/0x184 [<ffffffff8108ca1d>] ? > > > trace_hardirqs_on+0xd/0xf [<ffffffff81484fcf>] ? > > > _write_unlock_irq+0x37/0x3c [<ffffffff8105ef9f>] > > do_exit+0x7e/0x701 > > > [<ffffffff8105f6be>] sys_exit_group+0x0/0x1b > > [<ffffffff8105f6d5>] > > > sys_exit_group+0x17/0x1b [<ffffffff81012d72>] > > > system_call_fastpath+0x16/0x1b > > > > > > References > > > > > > Visible links > > > 1. mailto:[18][19]pasik@xxxxxx > > > 2. mailto:[19][20]pasik@xxxxxx > > > 3. > > > [20][21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 4. > > > > [21][22]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 5. mailto:[22][23]pasik@xxxxxx > > > 6. > > > [23][24]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 7. > > > > [24][25]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 8. mailto:[25][26]pasik@xxxxxx > > > 9. mailto:[26][27]pasik@xxxxxx > > > 10. > > > [27][28]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 11. > > > > [28][29]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 12. mailto:[29][30]pasik@xxxxxx > > > 13. > > > [30][31]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > > 14. > > > > [31][32]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > > 15. mailto:[32][33]pasik@xxxxxx > > > 16. mailto:[33][34]dm-devel@xxxxxxxxxx > > > > References > > > > Visible links > > 1. mailto:[35]pasik@xxxxxx > > 2. mailto:[36]pasik@xxxxxx > > 3. mailto:[37]pasik@xxxxxx > > 4. > [38]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 5. > > [39]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 6. mailto:[40]pasik@xxxxxx > > 7. > [41]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 8. > > [42]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 9. mailto:[43]pasik@xxxxxx > > 10. mailto:[44]pasik@xxxxxx > > 11. > [45]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 12. > > [46]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 13. mailto:[47]pasik@xxxxxx > > 14. > [48]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 15. > > [49]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 16. mailto:[50]pasik@xxxxxx > > 17. mailto:[51]dm-devel@xxxxxxxxxx > > 18. mailto:[52]pasik@xxxxxx > > 19. mailto:[53]pasik@xxxxxx > > 20. > [54]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 21. > > [55]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 22. mailto:[56]pasik@xxxxxx > > 23. > [57]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 24. > > [58]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 25. mailto:[59]pasik@xxxxxx > > 26. mailto:[60]pasik@xxxxxx > > 27. > [61]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 28. > > [62]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 29. mailto:[63]pasik@xxxxxx > > 30. > [64]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > > 31. > > [65]http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > > 32. mailto:[66]pasik@xxxxxx > > 33. mailto:[67]dm-devel@xxxxxxxxxx > > References > > Visible links > 1. mailto:pasik@xxxxxx > 2. mailto:pasik@xxxxxx > 3. mailto:pasik@xxxxxx > 4. mailto:pasik@xxxxxx > 5. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 6. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 7. mailto:pasik@xxxxxx > 8. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 9. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 10. mailto:pasik@xxxxxx > 11. mailto:pasik@xxxxxx > 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 13. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 14. mailto:pasik@xxxxxx > 15. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 16. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 17. mailto:pasik@xxxxxx > 18. mailto:dm-devel@xxxxxxxxxx > 19. mailto:pasik@xxxxxx > 20. mailto:pasik@xxxxxx > 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 22. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 23. mailto:pasik@xxxxxx > 24. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 25. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 26. mailto:pasik@xxxxxx > 27. mailto:pasik@xxxxxx > 28. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 29. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 30. mailto:pasik@xxxxxx > 31. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 32. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 33. mailto:pasik@xxxxxx > 34. mailto:dm-devel@xxxxxxxxxx > 35. mailto:pasik@xxxxxx > 36. mailto:pasik@xxxxxx > 37. mailto:pasik@xxxxxx > 38. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 39. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 40. mailto:pasik@xxxxxx > 41. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 42. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 43. mailto:pasik@xxxxxx > 44. mailto:pasik@xxxxxx > 45. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 46. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 47. mailto:pasik@xxxxxx > 48. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 49. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 50. mailto:pasik@xxxxxx > 51. mailto:dm-devel@xxxxxxxxxx > 52. mailto:pasik@xxxxxx > 53. mailto:pasik@xxxxxx > 54. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 55. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 56. mailto:pasik@xxxxxx > 57. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 58. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 59. mailto:pasik@xxxxxx > 60. mailto:pasik@xxxxxx > 61. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 62. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 63. mailto:pasik@xxxxxx > 64. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git > 65. > http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.9-pvops-dom0-xen-stable-x86_64 > 66. mailto:pasik@xxxxxx > 67. mailto:dm-devel@xxxxxxxxxx _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |