[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] xen Installation through YUM


  • To: Lista Usuários de XEN <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: Lucélio Gomes de Freitas <aa.lucelio@xxxxxxxxx>
  • Date: Wed, 03 Mar 2010 22:00:21 -0300
  • Delivery-date: Wed, 03 Mar 2010 16:53:48 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:user-agent:mime-version:to:subject:references :in-reply-to:content-type; b=N5UI5uRkNST56MCn7x5UvK3W3ZMssXwNjElL7BUEoVzlryouihdAWi6ZG88kI1XNWE KGLEnA8w3mGFYsfXNq2Ms3gw+c3g1QBfkLcFqhMndPP1gTm1deawjoyu6GmHzw+UFOTm CwdFBpPjRiBR2Ut1+KIZlSMbHyDr230r8Fcno=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi kishore kumar, Boris, Pasi, and ...,

I also would like very much to install Xen in F12-x86_64.   I don't think that is easy do it, but I would like to, and may I sugest someone to make a "How to", for making a complete installation via YUM, please.   I have a free machine(F12-x86_64) to do this in my lab.

Ps: for me is a dream to have Xen updated via "sudo yum update", like I actually do now in an other machine with Virtualbox, on my network.

Thanks,

Em 03-03-2010 19:50, kishore kumar escreveu:
Attached is the file which gives my Hardware configuration details.
 
I did cat /proc/cpuinfo command to get this.
 
Let me know if you need any other info.
 
Hi Pasi
 
The Xen boot messages I am getting is on the vga, not on the serial port.  I get other BIOS information on the serial port and then transfer the Xen boot messages to vga. 
 
Let me know how to capture the boot messages from vga.
 
Thanks
BK.

On Wed, Mar 3, 2010 at 2:30 AM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
Could you share your hardware configuration ?


Boris.

--- On Tue, 3/2/10, kishore kumar <bodkekumar@xxxxxxxxx> wrote:

From: kishore kumar <bodkekumar@xxxxxxxxx>
Subject: Re: [Xen-users] xen Installation through YUM
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Tuesday, March 2, 2010, 8:02 PM



I disabled DRM and rebuilt the kernel.  Still the same black screen. :(
 
I did connect the serial port as well.
 
 

 
On Tue, Mar 2, 2010 at 2:04 PM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
Might be DRM issue as i wrote . Try disable DRM first.
But i suspect , serial console would be required.

Boris.


--- On Tue, 3/2/10, kishore kumar <bodkekumar@xxxxxxxxx> wrote:

From: kishore kumar <bodkekumar@xxxxxxxxx>
Subject: Re: [Xen-users] xen Installation through YUM
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Tuesday, March 2, 2010, 2:56 PM


Hi Boris,
 
I successfully compiled and installed linux 2.6.32.9.
 
I modified the grub.conf to boot with xen.
 
After reboot, the system shows some xen boot messages and goes to black screen.  Nothing comes on the screen.
 
What could be wrong here?
 
Thanks
BK


 
On Mon, Mar 1, 2010 at 5:12 PM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
Quote:-


PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
Git Repository to support Xen 3.4.2 Dom0.
# git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-xen            (THIS WENT THROUGH SUCCESSFULLY)

# cd linux-2.6-xen

end Quote.

Add commands:-

#  git checkout origigin/xen/stable -b  xen/stable
#  git pull

Build with attached config :-

# make -j2 (or 4 -number of cores your CPU)
# make modules_install install

Create initrd-2.6.32.9.img for your OS.

Boris.


--- On Mon, 3/1/10, kishore kumar <bodkekumar@xxxxxxxxx> wrote:

From: kishore kumar <bodkekumar@xxxxxxxxx>
Subject: Re: [Xen-users] xen Installation through YUM
To: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>
Cc: "Pasi Kärkkäinen" <pasik@xxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
Date: Monday, March 1, 2010, 7:52 PM


Hi All,
 
To follow up this, after Installing Xen Hypervisor 3.4.2 successfully, I downloaded Linux 2.6.18 with Xen 3.4.x support source tarball, updated for Xen 3.4.2 from xen.org website and compiled and installed.
 
Later I changed my grub.conf file to boot from Xen.
 
#######################
root (hd0,0)
kernel /xen-3.4.2.gz
module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
module /initrd-2.6.18.8.img
#######################
 
After I reboot, I get the following messages.
 
################
 
Xenopf  Intel processor model 44 or P6 family is not supported.
Initialization failed.
 
LOADING DOMAIN 0
Cannot load bzImage v2.04. v2.08 is required.
 
Panic on CPU 0
Could not set up DOM 0 Guest OS
Reboot in 5 sec
 
###############
 What is wrong happening here?
 
THanks
BK
On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar <bodkekumar@xxxxxxxxx> wrote:
Hi Boris,
 
I was following your steps and got stuck in the middle.  Here is what I did...
 
Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed successfully.
 
Now while doing the step 2
 
STEP 2:
 
 Install Libvirt
# yum install libvirt libvirt-python python-virtinst \
virt-manager virt-viewer  (THIS WENT THROUGH SUCCESSFULLY)
 
PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
Git Repository to support Xen 3.4.2 Dom0.
# git clone git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-xen            (THIS WENT THROUGH SUCCESSFULLY)

# cd linux-2.6-xen
# make menuconfig ( setup Xen Dom0 support)  (HOW TO SET UP THIS ?)
# make -j(x)(number_of_kernels)  (I DID MAKE -J, WHAT SHOULD I GIVE HERE IN PLACE OF x. ??
 
 BUT GAVE ME ERRORS.  I DONT KNOW WHAT WRONG I AM DOING HERE.  CAN YOU PLEASE HELP ME OUT IN THIS?)
 
I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE.  I AM USING FEDORA 12 MACHINE.
 
Thanks
BK


On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote:
Nothing went wrong.
Now build pvops kernel.
Instructions bellow.
Reading PVOPS WIKI would help as well

Boris.


--- On Fri, 2/26/10, kishore kumar <bodkekumar@xxxxxxxxx> wrote:

From: kishore kumar <bodkekumar@xxxxxxxxx>

Subject: Re: [Xen-users] xen Installation through YUM
To: "Pasi Kärkkäinen" <pasik@xxxxxx>
Cc: "Boris Derzhavets" <bderzhavets@xxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
Date: Friday, February 26, 2010, 9:41 PM


Now I am able to do  yum install kernel-xen xen.
 
I can see the xen Images sitting in /boot directory.  Its xen-3.4.2.gz and xen.gz.
 
Is this what to be expected ? 
 
I changed the grub.conf file to boot with Xen as below
 
title Fedora (2.6.31.9-174.fc12.x86_64)
       root(hd0,0)
       kernel /xen-3.4.2.gz
      
My question is I dont see vmlinuz-2.6-xen0 in /boot directory. 
 
Do I need to add this line module /boot/vmlinuz-2.6-xen0 ???  But I dont see this file .When we do yum to insall xen, will it also install vmlinuz-2.6-xen0 also ??
 
Any idea what went wrong here??
 
thanks
BK
 

 
On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote:
>    I have already set gpgcheck=0 in /etc/yum.conf  file.
>
>    I did not clearly understood on what you said in the next line.........
>
>    to install unsigned rpms supposed to be built latter.
>    Activate rpmbuild on F12:-
>
>    # yum install transfig texi2html libaio-devel dev86 \
>      glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>    what should I do can you please clarify me on the above statements you
>    said???
>
>    I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm from
>    internet and started doing the steps mentioned by you.  but at the very
>    step I get the messages saying
>
>    After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>    warning: user mockbuild does not exist - using root
>    warning: group mockbuild does not exist - using root
>
>    Any idea what went wrong again??
>

Nothing went wrong, those are just warnings.

-- Pasi

>    THanks
>    bk
>
>    On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets
>    <[1]bderzhavets@xxxxxxxxx> wrote:
>
> Set in /etc/yum.conf set gpgcheck=0 ( temporarily )
> to install unsigned rpms supposed to be built latter.
> Activate rpmbuild on F12:-
>
> # yum install transfig texi2html libaio-devel dev86 \
>   glibc-devel.i686 e2fsprogs-devel gitk mkinitrd
>
> 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net
> xen-3.4.2-2.fc13.src.rpm. Now :-
>
> # rpm -iv xen-3.4.2-2.fc13.src.rpm
> # cd
> # cd rpmbuild/SPEC
> # rpmbuild -bb ./xen.spec
> # cd ../RPMS/x86_64
> yum install xen-3.4.2-2.fc12.x86_64.rpm \
> xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \
> xen-devel-3.4.2-2.fc12.x86_64.rpm \
> xen-doc-3.4.2-2.fc12.x86_64.rpm \
> xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \
> xen-libs-3.4.-2.fc12.x86_64.rpm \
> xen-runtime-3.4.2-2.fc12.x86_64.rpm
>
> Xen Hypervisor 3.4.2 installed
>
> 2. Install Libvirt
>
> # yum install libvirt libvirt-python python-virtinst \
> virt-manager virt-viewer
>
> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge
> Git Repository to support Xen 3.4.2 Dom0.
>
> # git clone git://[2]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
> linux-2.6-xen
> # cd linux-2.6-xen
> # make menuconfig ( setup Xen Dom0 support)
> # make -j(x)(number_of_kernels)
> # make modules_install install
>
> You may also want to build 2.6.32.9 pvops
>
> # git checkout origin/xen/stable -b  xen/stable
>
> I just switched from xen/master ( default 2.6.31.6 ) to xen/stable (the most
> recent supposed to become LTS - 2.6.32.9)
>
> Boris.
>
> --- On Fri, 2/26/10, Pasi Kärkkäinen <[3]pasik@xxxxxx> wrote:
>
>   From: Pasi Kärkkäinen <[4]pasik@xxxxxx>
>   Subject: Re: [Xen-users] xen Installation through YUM
>   To: "kishore kumar" <[5]bodkekumar@xxxxxxxxx>
>   Cc: [6]xen-users@xxxxxxxxxxxxxxxxxxx
>   Date: Friday, February 26, 2010, 4:50 AM
>
>   On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote:
>   >    HI,
>   >
>   >    I am trying to install xen through yum. Here is what I did.
>   >
>   >
>   >    [root@localhost Kishore]# yum install kernel-xen xen
>   >
>   >    Setting up Install Process
>   >
>   >    Resolving Dependencies
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be installed
>   >
>   >    --> Processing Dependency: kernel-firmware >= 2.6.31.9-174.fc12 for
>   >    package: kernel-2.6.31.9-174.fc12.x86_64
>   >
>   >    ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for package:
>   >    xen-3.4.2-1.fc12.x86_64
>   >
>   >    --> Processing Dependency: PyXML for package: xen-3.4.2-1.fc12.x86_64
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated
>   >
>   >    ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set to be updated
>   >
>   >    ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for package:
>   >    xen-runtime-3.4.2-1.fc12.x86_64
>   >
>   >    --> Processing Dependency: xen-hypervisor-abi = 3.4 for package:
>   >    xen-runtime-3.4.2-1.fc12.x86_64
>   >
>   >    --> Running transaction check
>   >
>   >    ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated
>   >
>   >    --> Finished Dependency Resolution
>   >
>   >    Dependencies Resolved
>   >
>   >
>   ================================================================================
>   >
>   >    Package Arch Version Repository Size
>   >
>   >
>   ================================================================================
>   >
>   >    Installing:
>   >
>   >    kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M
>   >
>   >    xen x86_64 3.4.2-1.fc12 updates-released 898 k
>   >
>   >    Installing for dependencies:
>   >
>   >    PyXML x86_64 0.8.4-17.fc12 updates-released 906 k
>   >
>   >    xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M
>   >
>   >    xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M
>   >
>   >    Updating for dependencies:
>   >
>   >    kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906 k
>   >
>   >    xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k
>   >
>   >    Transaction Summary
>   >
>   >
>   ================================================================================
>   >
>   >    Install 5 Package(s)
>   >
>   >    Upgrade 2 Package(s)
>   >
>   >    Total download size: 29 M
>   >
>   >    Is this ok [y/N]: y
>   >
>   >    Downloading Packages:
>   >
>   >    (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00
>   >
>   >    (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02
>   >
>   >    (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB 00:00
>   >
>   >    (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00
>   >
>   >    (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00
>   >
>   >    (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00
>   >
>   >    (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00
>   >
>   >
>   --------------------------------------------------------------------------------
>   >
>   >    Total 6.7 MB/s | 29 MB 00:04
>   >
>   >    warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: NOKEY, key ID
>   >    57bbccba
>   >
>   >     Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not installed
>   >
>   >
>   >
>   >    Did Xen got installed with this?
>   >
>   >    Will the grub.conf be automatically updtaed after I run this command.
>   >    (But I dont see my grub.conf being updated)
>   >
>   >    Any Idea what went wrong here.
>   >
>
>   Fedora 12 doesn't include Xen dom0 capable kernel, see:
>   [7]http://fedoraproject.org/wiki/Features/XenPvopsDom0
>
>   You need to get one of the 'testing' rpms, or compile it yourself.
>
>   -- Pasi
>
>   _______________________________________________
>   Xen-users mailing list
>   [8]Xen-users@xxxxxxxxxxxxxxxxxxx
>   [9]http://lists.xensource.com/xen-users
>
> References
>
>    Visible links
>    1. mailto:bderzhavets@xxxxxxxxx
>    2. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
>    3. mailto:pasik@xxxxxx
>    4. mailto:pasik@xxxxxx
>    5. mailto:bodkekumar@xxxxxxxxx
>    6. mailto:xen-users@xxxxxxxxxxxxxxxxxxx
>    7. http://fedoraproject.org/wiki/Features/XenPvopsDom0
>    8. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx
>    9. http://lists.xensource.com/xen-users


-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list






-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



-----Inline Attachment Follows-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users

-- 
Lucélio Gomes de Freitas
ETFCSF-> U.G.F.-> P.U.C.(RJ)
Engº, Analista Suporte(Free Mind).
Email: aa.lucelio@xxxxxxxxx
Tel: 55 0XX 21 85964911
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.