Re: [Xen-users] Xen networking with two NIC's

[Digimer <linux@xxxxxxxxxxx>]

On 10-02-23 11:01 PM, Andrew Kilham wrote:
> Hi,
>
> I have a Xen box set up with a number of VM's on it using bridged
> networking. I have been using one NIC on the server, and assigning
> public IP's to each of the VM's.
>
> I have recently got a second separate physical machine, and I would like
> to use NFS to mount drives from my new machine, in to the VM's on my Xen
> machine. I have connected a crossover cable from the Xen machine to the
> new machine, and I have set up a local area network between the two
> servers. I'm just not sure how to then get my VM's to connect to the new
> network. Could someone please point me in the right direction :)
>
> Cheers,
>
> Andrew
If I understand correctly; You've got something like this:

dom0 - eth0 = 192.168.1.1
domA - eth0 = 192.168.1.100
domB - eth0 = 192.168.1.101
domB - eth0 = 192.168.1.102

You want to add another physical machine at something like:

New - eth0 = 192.168.1.10

And then mount it's storage on the VMs?

If that is right, then you should be able to connect dom0's eth0 
interface to the new machine's eth0 (via cross-over or a switch) and be 
off to the races. Is this what is failing?
Digi


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users