> On 17/02/2010 18:24, Pasi Kärkkäinen wrote:
> > On Wed, Feb 17, 2010 at 03:21:12PM +0100, Olivier B. wrote:
> >
> >> Pasi Kärkkäinen a écrit :
> >>
> >>> On Wed, Feb 17, 2010 at 01:49:46PM +0100, Olivier B. wrote:
> >>>
> >>>
> >>>> For example :
> >>>> name = 'athena'
> >>>> kernel = '/boot/vmlinuz-2.6.31.12-dae-xen'
> >>>> ramdisk = '/boot/initrd.img-2.6.31.12-dae-xen'
> >>>> memory = '1024'
> >>>> root = 'root=/dev/mapper/vg--athena-root ro rootflags=data="">> >>>> disk = [ 'drbd:athena-disk,sda,w' ]
> >>>> vif = [ 'mac=02:00:00:00:04:3f' ]
> >>>> extra = 'rootdelay=1 raid=noautodetect'
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>> What if you also specify the bridge on the vif line?
> >>>
> >>> -- Pasi
> >>>
> >>>
> >>>
> >> Same result with "vif = [ 'mac=02:00:00:00:04:3f,bridge=xenbr0' ]" :
> >>
> >>
> > Weird. what if you also specify script=foo and create /etc/xen/scripts/foo,
> > which only has "exit 0" in it, and is executable.
> >
> > Also worth trying without the drbd: disk.. the error is about vif,
> > but good to verify with normal file: or phy: disks aswell. You never know :)
> >
> > -- Pasi
> >
> >
> >> I obtain "Error: Device 0 (vif) could not be connected. Hotplug scripts
> >> not working." after 100 seconds.
> >>
> >> And udev monitor said :
> >> UEVENT[1266416315.932082] add /devices/vbd-11-2048 (xen-backend)
> >> UDEV [1266416315.938359] add /devices/vbd-11-2048 (xen-backend)
> >> UEVENT[1266416315.960950] add /devices/vif-11-0 (xen-backend)
> >> UDEV [1266416315.961748] add /devices/vif-11-0 (xen-backend)
> >> UEVENT[1266416315.969379] add /devices/vif-11-0/net/vif11.0 (net)
> >> UEVENT[1266416315.970659] online /devices/vif-11-0 (xen-backend)
> >> UDEV [1266416315.980741] add /devices/vif-11-0/net/vif11.0 (net)
> >> UDEV [1266416315.982675] online /devices/vif-11-0 (xen-backend)
> >> UEVENT[1266416316.094038] add /devices/console-11-0 (xen-backend)
> >> UDEV [1266416316.095965] add /devices/console-11-0 (xen-backend)
> >>
> >> UEVENT[1266416355.592132] add /kernel/uids/101 (uids)
> >> UDEV [1266416355.592846] add /kernel/uids/101 (uids)
> >> UEVENT[1266416356.623642] remove /kernel/uids/101 (uids)
> >> UDEV [1266416356.625038] remove /kernel/uids/101 (uids)
> >>
> >> UDEV [1266416397.419326] remove /devices/vif-10-0/net/vif10.0 (net)
> >> UDEV [1266416397.439092] remove /devices/vif-10-0 (xen-backend)
> >>
> >> UEVENT[1266416416.855557] remove /devices/console-11-0 (xen-backend)
> >> UDEV [1266416416.858075] remove /devices/console-11-0 (xen-backend)
> >> UEVENT[1266416416.894895] remove /devices/vbd-11-2048 (xen-backend)
> >> UDEV [1266416416.896732] remove /devices/vbd-11-2048 (xen-backend)
> >> UEVENT[1266416416.900803] offline /devices/vif-11-0 (xen-backend)
> >> UEVENT[1266416416.925352] remove /devices/vif-11-0/net/vif11.0 (net)
> >> UEVENT[1266416416.936165] remove /devices/vif-11-0 (xen-backend)
> >>
> >> Olivier
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >>
> >
> Hi,
>
> so... it's my fault : my .config was different... If I take the same
> .config file it works well, with DRBD too.
> Now I have to found witch kernel parameter is needed for Xen.
>
> I suspect one of this flags :
>
> in the working .config :
> < CONFIG_SYSFS_DEPRECATED=y
> < CONFIG_SYSFS_DEPRECATED_V2=y
> < CONFIG_KALLSYMS_ALL=y
> < # CONFIG_X86_PAT is not set
> < CONFIG_UNUSED_SYMBOLS=y
> < CONFIG_FRAME_POINTER=y
>
> in the not working .config :
> > # CONFIG_SYSFS_DEPRECATED_V2 is not set
> > CONFIG_X86_PAT=y
> > # CONFIG_UNUSED_SYMBOLS is not set
> > # CONFIG_FRAME_POINTER is not set
>
> Any idea ? Anyway I will do some tests to try to identify which one is
> required by Xen.
>
That would be great. By the way, I also suspect certain option in the networking section of the .config must be set to avoid the "Error: Device 0 (vif) could not be connected. Hotplug scripts not working." error.
If I may suggest, I'd would be much appreicated is you could place your .config option findings in a xensource wiki page or email your finding to someone that could....
That would be awesome!
Thanks.
-M
> Thanks,
> Olivier
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
Windows® phone-your Windows stuff, on the go. See more.
|
