|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] 2.6.31.6 pv_ops can't boot pv_ops DomU kernel
On Thu, Jan 28, 2010 at 11:56:54PM +0100, Stefan Kuhne wrote: > Am 28.01.2010 22:13, schrieb Pasi Kärkkäinen: > > > Do you have "console=hvc0 earlyprintk=xen" passed to the domU kernel > > cmdline? > > You should get more output then.. > > > Now it is: > extra = "ro quiet xencons=tty1 console=hvc0 earlyprintk=xen" > You should remove "xencons=tty1", it's not needed/used with pv_ops domU, afaik. > And i get: > maxdata # xm create -f /etc/xen/xm/xmTest-Eis2 -c > Using config file "/etc/xen/xm/xmTest-Eis2". > Started domain Test-Eis2 (id=2) > [ 0.025967] xenbus_probe wake_waiting > [ 0.025989] xenbus_probe_init ok > [ 0.054433] xenbus_probe_backend_init bus registered ok > [ 0.054433] xenbus_probe_devices backend > [ 0.057111] xenbus_probe_devices failed xenbus_directory > [ 0.057111] backend_probe_and_watch devices probed ok > [ 0.058073] backend_probe_and_watch watch add ok ok > [ 0.058086] backend_probe_and_watch all done > [ 0.058262] xenbus_probe_frontend_init bus registered ok > [ 0.058283] xenbus_probe_devices device > [ 0.058305] xenbus_probe_devices 1/3 vbd > [ 0.058305] xenbus_probe_device_type type vbd > [ 0.058305] xenbus_probe_device_type 1/2 769 > [ 0.058305] xenbus_probe_device_type 2/2 770 > [ 0.059186] xenbus_probe_devices 2/3 vif > [ 0.059200] xenbus_probe_device_type type vif > [ 0.059223] xenbus_probe_device_type 1/1 0 > [ 0.059223] xenbus_probe_devices 3/3 console > [ 0.059223] xenbus_probe_device_type type console > [ 0.060037] xenbus_probe_device_type 1/1 0 > [ 0.060178] frontend_probe_and_watch devices probed ok > [ 0.060209] frontend_probe_and_watch watch add ok ok > [ 0.060209] frontend_probe_and_watch all done > [ 0.096572] microcode: no support for this CPU vendor > [ 0.136161] registering netback > [ 0.206012] i8042.c: No controller found. > > without "quiet": > Yeah, you need it definitely without "quiet" :) > maxdata # xm create -f /etc/xen/xm/xmTest-Eis2 -c > Using config file "/etc/xen/xm/xmTest-Eis2". > Started domain Test-Eis2 (id=4) > (early) [ 0.000000] Reserving virtual > address space above 0xf5800000 > (early) [ 0.000000] Initializing cgroup subsys cpuset > (early) [ 0.000000] Initializing cgroup subsys cpu > (early) [ 0.000000] Linux version 2.6.31.6-xen (root@Dev-Eis) (gcc > version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #9 SMP Tue Jan 26 13:51:52 CET 2010 > (early) [ 0.000000] KERNEL supported cpus: > (early) [ 0.000000] Intel GenuineIntel > (early) [ 0.000000] AMD AuthenticAMD > (early) [ 0.000000] NSC Geode by NSC > (early) [ 0.000000] Cyrix CyrixInstead > (early) [ 0.000000] Centaur CentaurHauls > (early) [ 0.000000] Transmeta GenuineTMx86 > (early) [ 0.000000] Transmeta TransmetaCPU > (early) [ 0.000000] UMC UMC UMC UMC > (early) [ 0.000000] ACPI in unprivileged domain disabled > (early) [ 0.000000] released 0 pages of unused memory > (early) [ 0.000000] BIOS-provided physical RAM map: > (early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > (early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > (early) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) > (early) [ 0.000000] console [xenboot0] enabled > (early) [ 0.000000] DMI not present or invalid. > (early) [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x1000000 > (early) [ 0.000000] Scanning 1 areas for low memory corruption > (early) [ 0.000000] modified physical RAM map: > (early) [ 0.000000] modified: 0000000000000000 - 0000000000002000 > (early) (usable)(early) > (early) [ 0.000000] modified: 0000000000002000 - 0000000000006000 > (early) (reserved)(early) > (early) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 > (early) (usable)(early) > (early) [ 0.000000] modified: 00000000000a0000 - 0000000000100000 > (early) (reserved)(early) > (early) [ 0.000000] modified: 0000000000100000 - 0000000010000000 > (early) (usable)(early) > (early) [ 0.000000] init_memory_mapping: > 0000000000000000-0000000010000000 > (early) [ 0.000000] NX (Execute Disable) protection: active > (early) [ 0.000000] RAMDISK: 01837000 - 01dd2000 > (early) [ 0.000000] 0MB HIGHMEM available. > (early) [ 0.000000] 256MB LOWMEM available. > (early) [ 0.000000] mapped low ram: 0 - 10000000 > (early) [ 0.000000] low ram: 0 - 10000000 > (early) [ 0.000000] node 0 low ram: 00000000 - 10000000 > (early) [ 0.000000] node 0 bootmap 00074000 - 00076000 > (early) [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - > 0010000000] > (early) [ 0.000000] #0 [0000000000 - 0000001000] BIOS data > page(early) ==> [0000000000 - 0000001000] > (early) [ 0.000000] #1 [0001e15000 - 0001e27000] XEN > PAGETABLES(early) ==> [0001e15000 - 0001e27000] > (early) [ 0.000000] #2 [0000001000 - 0000002000] EX > TRAMPOLINE(early) ==> [0000001000 - 0000002000] > (early) [ 0.000000] #3 [0000006000 - 0000007000] > TRAMPOLINE(early) ==> [0000006000 - 0000007000] > (early) [ 0.000000] #4 [0001000000 - 0001711a34] TEXT DATA > BSS(early) ==> [0001000000 - 0001711a34] > (early) [ 0.000000] #5 [0001837000 - 0001dd2000] > RAMDISK(early) ==> [0001837000 - 0001dd2000] > (early) [ 0.000000] #6 [0001dd2000 - 0001e15000] XEN START > INFO(early) ==> [0001dd2000 - 0001e15000] > (early) [ 0.000000] #7 [0000007000 - 0000074000] > PGTABLE(early) ==> [0000007000 - 0000074000] > (early) [ 0.000000] #8 [0000074000 - 0000076000] > BOOTMAP(early) ==> [0000074000 - 0000076000] > (early) [ 0.000000] Zone PFN ranges: > (early) [ 0.000000] DMA 0x00000000 -> 0x00001000 > (early) [ 0.000000] Normal 0x00001000 -> 0x00010000 > (early) [ 0.000000] HighMem 0x00010000 -> 0x00010000 > (early) [ 0.000000] Movable zone start PFN for each node > (early) [ 0.000000] early_node_map[3] active PFN ranges > (early) [ 0.000000] 0: 0x00000000 -> 0x00000002 > (early) [ 0.000000] 0: 0x00000006 -> 0x000000a0 > (early) [ 0.000000] 0: 0x00000100 -> 0x00010000 > (early) [ 0.000000] Using APIC driver default > (early) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > (early) [ 0.000000] Local APIC disabled by BIOS -- you can enable it > with "lapic" > (early) [ 0.000000] APIC: disable apic facility > (early) [ 0.000000] PM: Registered nosave memory: 0000000000002000 - > 0000000000006000 > (early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > (early) [ 0.000000] Allocating PCI resources starting at 10000000 > (gap: 10000000:f0000000) > (early) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 > nr_node_ids:1 > (early) [ 0.000000] PERCPU: Allocated 9 4k pages, static data 36764 bytes > (early) [ 0.000000] Xen: using vcpu_info placement > (early) [ 0.000000] Built 1 zonelists in Zone order, mobility > grouping on. Total pages: 64924 > (early) [ 0.000000] Kernel command line: root=/dev/hda1 ro > xencons=tty1 console=hvc0 earlyprintk=xen > (early) [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) > (early) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, > 131072 bytes) > (early) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, > 65536 bytes) > (early) [ 0.000000] Enabling fast FPU save and restore... (early) done. > (early) [ 0.000000] Enabling unmasked SIMD FPU exception support... > (early) done. > (early) [ 0.000000] Initializing CPU#0 > (early) [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) > (early) [ 0.000000] Memory: 245336k/262144k available (3813k kernel > code, 16080k reserved, 2249k data, 388k init, 0k highmem) > (early) [ 0.000000] virtual kernel memory layout: > (early) [ 0.000000] fixmap : 0xf571e000 - 0xf57ff000 ( 900 kB) > (early) [ 0.000000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB) > (early) [ 0.000000] vmalloc : 0xd0800000 - 0xf51fe000 ( 585 MB) > (early) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > (early) [ 0.000000] .init : 0xc15ec000 - 0xc164d000 ( 388 kB) > (early) [ 0.000000] .data : 0xc13b9629 - 0xc15ebb2c (2249 kB) > (early) [ 0.000000] .text : 0xc1000000 - 0xc13b9629 (3813 kB) > (early) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, > MinObjects=0, CPUs=1, Nodes=1 > (early) [ 0.000000] Hierarchical RCU implementation. > (early) [ 0.000000] NR_IRQS:2304 nr_irqs:256 > (early) [ 0.000000] Detected 1596.054 MHz processor. > (early) [ 0.000999] Console: colour dummy device 80x25 > (early) [ 0.000999] console [tty0] enabled > (early) [ 0.000000] Reserving virtual address space above 0xf5800000 > (early) [ 0.000000] Initializing cgroup subsys cpuset > (early) [ 0.000000] Initializing cgroup subsys cpu > (early) [ 0.000000] Linux version 2.6.31.6-xen (root@Dev-Eis) (gcc > version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #9 SMP Tue Jan 26 13:51:52 CET 2010 > (early) [ 0.000000] KERNEL supported cpus: > (early) [ 0.000000] Intel GenuineIntel > (early) [ 0.000000] AMD AuthenticAMD > (early) [ 0.000000] NSC Geode by NSC > (early) [ 0.000000] Cyrix CyrixInstead > (early) [ 0.000000] Centaur CentaurHauls > (early) [ 0.000000] Transmeta GenuineTMx86 > (early) [ 0.000000] Transmeta TransmetaCPU > (early) [ 0.000000] UMC UMC UMC UMC > (early) [ 0.000000] ACPI in unprivileged domain disabled > (early) [ 0.000000] released 0 pages of unused memory > (early) [ 0.000000] BIOS-provided physical RAM map: > (early) [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) > (early) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) > (early) [ 0.000000] Xen: 0000000000100000 - 0000000010000000 (usable) > (early) [ 0.000000] console [xenboot0] enabled > (early) [ 0.000000] DMI not present or invalid. > (early) [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x1000000 > (early) [ 0.000000] Scanning 1 areas for low memory corruption > (early) [ 0.000000] modified physical RAM map: > (early) [ 0.000000] modified: 0000000000000000 - 0000000000002000 > (usable) > (early) [ 0.000000] modified: 0000000000002000 - 0000000000006000 > (reserved) > (early) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 > (usable) > (early) [ 0.000000] modified: 00000000000a0000 - 0000000000100000 > (reserved) > (early) [ 0.000000] modified: 0000000000100000 - 0000000010000000 > (usable) > (early) [ 0.000000] init_memory_mapping: > 0000000000000000-0000000010000000 > (early) [ 0.000000] NX (Execute Disable) protection: active > (early) [ 0.000000] RAMDISK: 01837000 - 01dd2000 > (early) [ 0.000000] 0MB HIGHMEM available. > (early) [ 0.000000] 256MB LOWMEM available. > (early) [ 0.000000] mapped low ram: 0 - 10000000 > (early) [ 0.000000] low ram: 0 - 10000000 > (early) [ 0.000000] node 0 low ram: 00000000 - 10000000 > (early) [ 0.000000] node 0 bootmap 00074000 - 00076000 > (early) [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - > 0010000000] > (early) [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page > ==> [0000000000 - 0000001000] > (early) [ 0.000000] #1 [0001e15000 - 0001e27000] XEN PAGETABLES > ==> [0001e15000 - 0001e27000] > (early) [ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE > ==> [0000001000 - 0000002000] > (early) [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE > ==> [0000006000 - 0000007000] > (early) [ 0.000000] #4 [0001000000 - 0001711a34] TEXT DATA BSS > ==> [0001000000 - 0001711a34] > (early) [ 0.000000] #5 [0001837000 - 0001dd2000] RAMDISK > ==> [0001837000 - 0001dd2000] > (early) [ 0.000000] #6 [0001dd2000 - 0001e15000] XEN START INFO > ==> [0001dd2000 - 0001e15000] > (early) [ 0.000000] #7 [0000007000 - 0000074000] PGTABLE > ==> [0000007000 - 0000074000] > (early) [ 0.000000] #8 [0000074000 - 0000076000] BOOTMAP > ==> [0000074000 - 0000076000] > (early) [ 0.000000] Zone PFN ranges: > (early) [ 0.000000] DMA 0x00000000 -> 0x00001000 > (early) [ 0.000000] Normal 0x00001000 -> 0x00010000 > (early) [ 0.000000] HighMem 0x00010000 -> 0x00010000 > (early) [ 0.000000] Movable zone start PFN for each node > (early) [ 0.000000] early_node_map[3] active PFN ranges > (early) [ 0.000000] 0: 0x00000000 -> 0x00000002 > (early) [ 0.000000] 0: 0x00000006 -> 0x000000a0 > (early) [ 0.000000] 0: 0x00000100 -> 0x00010000 > (early) [ 0.000000] Using APIC driver default > (early) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs > (early) [ 0.000000] Local APIC disabled by BIOS -- you can enable it > with "lapic" > (early) [ 0.000000] APIC: disable apic facility > (early) [ 0.000000] PM: Registered nosave memory: 0000000000002000 - > 0000000000006000 > (early) [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 0000000000100000 > (early) [ 0.000000] Allocating PCI resources starting at 10000000 > (gap: 10000000:f0000000) > (early) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 > nr_node_ids:1 > (early) [ 0.000000] PERCPU: Allocated 9 4k pages, static data 36764 bytes > (early) [ 0.000000] Xen: using vcpu_info placement > (early) [ 0.000000] Built 1 zonelists in Zone order, mobility > grouping on. Total pages: 64924 > (early) [ 0.000000] Kernel command line: root=/dev/hda1 ro > xencons=tty1 console=hvc0 earlyprintk=xen > (early) [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) > (early) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, > 131072 bytes) > (early) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, > 65536 bytes) > (early) [ 0.000000] Enabling fast FPU save and restore... done. > (early) [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > (early) [ 0.000000] Initializing CPU#0 > (early) [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) > (early) [ 0.000000] Memory: 245336k/262144k available (3813k kernel > code, 16080k reserved, 2249k data, 388k init, 0k highmem) > (early) [ 0.000000] virtual kernel memory layout: > (early) [ 0.000000] fixmap : 0xf571e000 - 0xf57ff000 ( 900 kB) > (early) [ 0.000000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB) > (early) [ 0.000000] vmalloc : 0xd0800000 - 0xf51fe000 ( 585 MB) > (early) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > (early) [ 0.000000] .init : 0xc15ec000 - 0xc164d000 ( 388 kB) > (early) [ 0.000000] .data : 0xc13b9629 - 0xc15ebb2c (2249 kB) > (early) [ 0.000000] .text : 0xc1000000 - 0xc13b9629 (3813 kB) > (early) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, > MinObjects=0, CPUs=1, Nodes=1 > (early) [ 0.000000] Hierarchical RCU implementation. > (early) [ 0.000000] NR_IRQS:2304 nr_irqs:256 > (early) [ 0.000000] Detected 1596.054 MHz processor. > (early) [ 0.000999] Console: colour dummy device 80x25 > (early) [ 0.000999] console [tty0] enabled > (early) [ 0.000999] console handover: boot [xenboot0] -> real [hvc0] > [ 0.000999] installing Xen timer for CPU 0 > [ 0.000999] Calibrating delay loop (skipped), value calculated using > timer frequency.. 3192.10 BogoMIPS (lpj=1596054) > [ 0.000999] Security Framework initialized > [ 0.000999] SELinux: Initializing. > [ 0.000999] Mount-cache hash table entries: 512 > [ 0.000999] Initializing cgroup subsys ns > [ 0.000999] Initializing cgroup subsys cpuacct > [ 0.000999] Initializing cgroup subsys freezer > [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.000999] CPU: L2 cache: 2048K > [ 0.000999] CPU: Unsupported number of siblings 2 > [ 0.000999] Performance Counters: unsupported p6 CPU model 15 no PMU > driver, software counters only. > [ 0.001778] SMP alternatives: switching to UP code > [ 0.001999] Freeing SMP alternatives: 15k freed > [ 0.002530] Brought up 1 CPUs > [ 0.002900] khelper used greatest stack depth: 7248 bytes left > [ 0.003423] Booting paravirtualized kernel on Xen > [ 0.003440] Xen version: 4.0.0-rc1 (preserve-AD) > [ 0.003719] Grant tables using version 2 layout. > [ 0.004084] Grant table initialized > [ 0.024025] Time: 165:165:165 Date: 165/165/65 > [ 0.024157] NET: Registered protocol family 16 > [ 0.025052] xenbus_probe wake_waiting > [ 0.025070] xenbus_probe_init ok > [ 0.026995] PCI: setting up Xen PCI frontend stub > [ 0.040184] khelper used greatest stack depth: 7172 bytes left > [ 0.052804] bio: create slab <bio-0> at 0 > [ 0.053168] khelper used greatest stack depth: 7088 bytes left > [ 0.053214] ACPI: Interpreter disabled. > [ 0.053373] xenbus_probe_backend_init bus registered ok > [ 0.053373] xenbus_probe_devices backend > [ 0.056061] xenbus_probe_devices failed xenbus_directory > [ 0.056061] backend_probe_and_watch devices probed ok > [ 0.056061] backend_probe_and_watch watch add ok ok > [ 0.056061] backend_probe_and_watch all done > [ 0.056210] xenbus_probe_frontend_init bus registered ok > [ 0.056225] xenbus_probe_devices device > [ 0.057053] xenbus_probe_devices 1/3 vbd > [ 0.057065] xenbus_probe_device_type type vbd > [ 0.057089] xenbus_probe_device_type 1/2 769 > [ 0.057170] xenbus_probe_device_type 2/2 770 > [ 0.057198] xenbus_probe_device_type done > [ 0.057198] xenbus_probe_devices 2/3 vif > [ 0.057198] xenbus_probe_device_type type vif > [ 0.058039] xenbus_probe_device_type 1/1 0 > [ 0.058165] xenbus_probe_device_type done > [ 0.058179] xenbus_probe_devices 3/3 console > [ 0.058192] xenbus_probe_device_type type console > [ 0.058216] xenbus_probe_device_type 1/1 0 > [ 0.058216] xenbus_probe_device_type done > [ 0.058216] xenbus_probe_devices done > [ 0.058216] frontend_probe_and_watch devices probed ok > [ 0.059078] frontend_probe_and_watch watch add ok ok > [ 0.059094] frontend_probe_and_watch all done > [ 0.059107] xen_balloon: Initialising balloon driver with page order 0. > [ 0.060521] SCSI subsystem initialized > [ 0.061439] usbcore: registered new interface driver usbfs > [ 0.062225] usbcore: registered new interface driver hub > [ 0.062430] usbcore: registered new device driver usb > [ 0.063421] PCI: System does not support PCI > [ 0.063438] PCI: System does not support PCI > [ 0.063820] NetLabel: Initializing > [ 0.063835] NetLabel: domain hash size = 128 > [ 0.063847] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.063888] NetLabel: unlabeled traffic allowed by default > [ 0.063904] Xen: Initializing Xen DMA ops > [ 0.067946] pnp: PnP ACPI: disabled > [ 0.070471] NET: Registered protocol family 2 > [ 0.070599] IP route cache hash table entries: 2048 (order: 1, 8192 > bytes) > [ 0.070946] TCP established hash table entries: 8192 (order: 4, 65536 > bytes) > [ 0.071176] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > [ 0.071228] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.071244] TCP reno registered > [ 0.071368] NET: Registered protocol family 1 > [ 0.071490] Trying to unpack rootfs image as initramfs... > [ 0.088897] Freeing initrd memory: 5740k freed So initrd execution starts.. Is this the same initrd image you use for dom0? > [ 0.094181] platform rtc_cmos: registered platform RTC device (no PNP > device found) > [ 0.095796] microcode: no support for this CPU vendor > [ 0.095815] Scanning for low memory corruption every 60 seconds > [ 0.096950] audit: initializing netlink socket (disabled) > [ 0.096989] type=2000 audit(1264719476.727:1): initialized > [ 0.108357] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 0.117510] VFS: Disk quotas dquot_6.5.2 > [ 0.117738] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 0.119501] msgmni has been set to 491 > [ 0.120390] cryptomgr_test used greatest stack depth: 7004 bytes left > [ 0.121145] alg: No test for stdrng (krng) > [ 0.121506] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 252) > [ 0.121526] io scheduler noop registered > [ 0.121537] io scheduler anticipatory registered > [ 0.121550] io scheduler deadline registered > [ 0.121746] io scheduler cfq registered (default) > [ 0.122281] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 0.123202] Event-channel device installed. > [ 0.133447] blktap_device_init: blktap device major 254 > [ 0.133492] blktap_ring_init: blktap ring major: 251 > [ 0.135696] registering netback > [ 0.149775] Non-volatile memory driver v1.3 > [ 0.149797] Linux agpgart interface v0.103 > [ 0.150408] [drm] Initialized drm 1.1.0 20060810 > [ 0.150431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.158263] brd: module loaded > [ 0.161468] loop: module loaded > [ 0.187520] input: Macintosh mouse button emulation as > /class/input/input0 > [ 0.188548] Initialising Xen virtual ethernet driver. > [ 0.196070] blkfront: xvda1: barriers enabled > [ 0.200499] blkfront: xvda2: barriers enabled So you xvda1 and xvda2 disks are found.. > [ 0.201720] console [netcon0] enabled > [ 0.201734] netconsole: network logging started You have netconsole enabled? > [ 0.202551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 0.202738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > [ 0.202904] uhci_hcd: USB Universal Host Controller Interface driver > [ 0.203404] usbcore: registered new interface driver usblp > [ 0.203423] Initializing USB Mass Storage driver... > [ 0.203577] usbcore: registered new interface driver usb-storage > [ 0.203595] USB Mass Storage support registered. > [ 0.203748] usbcore: registered new interface driver libusual > [ 0.204385] PNP: No PS/2 controller found. Probing ports directly. > [ 0.205010] i8042.c: No controller found. > [ 0.205758] mice: PS/2 mouse device common for all mice > [ 0.206913] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 > [ 0.207735] cpuidle: using governor ladder > [ 0.207749] cpuidle: using governor menu > [ 0.267566] usbcore: registered new interface driver hiddev > [ 0.267721] usbcore: registered new interface driver usbhid > [ 0.267737] usbhid: v2.6:USB HID core driver > [ 0.267927] Advanced Linux Sound Architecture Driver Version 1.0.20. > [ 0.273795] modprobe used greatest stack depth: 6732 bytes left > [ 0.274311] ALSA device list: > [ 0.274325] No soundcards found. > [ 0.274371] Netfilter messages via NETLINK v0.30. > [ 0.274414] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) > [ 0.274919] ctnetlink v0.93: registering with nfnetlink. > [ 0.275778] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 0.275831] TCP cubic registered > [ 0.275843] Initializing XFRM netlink socket > [ 0.276931] NET: Registered protocol family 10 > [ 0.278378] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 0.278469] IPv6 over IPv4 tunneling driver > [ 0.279573] NET: Registered protocol family 17 > [ 0.279973] RPC: Registered udp transport module. > [ 0.279991] RPC: Registered tcp transport module. > [ 0.280077] Using IPI No-Shortcut mode > [ 0.280593] registered taskstats version 1 > [ 0.280628] XENBUS: Device with no driver: device/console/0 > [ 0.280664] Magic number: 1:252:3141 > [ 0.280801] Freeing unused kernel memory: 388k freed > [ 0.283323] Write protecting the kernel text: 3816k > [ 0.284369] Write protecting the kernel read-only data: 1768k > I wonder why it doesn't mount/switch the root here.. Do you have xenconsoled running in dom0? Do consoles of other guests work OK? > Is this: > [ 0.280628] XENBUS: Device with no driver: device/console/0 > > my Problem? > Nope, that shouldn't be a problem. -- Pasi _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |