[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Re: 64bit guest on top of 64bit hypervisor+dom0 does not boot with virsh while it does with xm command


  • To: Xen-users@xxxxxxxxxxxxxxxxxxx
  • From: 서지혜 <bonayaing@xxxxxxxxx>
  • Date: Fri, 27 Nov 2009 09:34:18 +0900
  • Cc:
  • Delivery-date: Thu, 26 Nov 2009 16:35:12 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=LRV37EvMqacGpK7f7qtP4hdu8fx1KmiKFkIlRCcvxPt/H5hMUpOcCZ9Nv0iFI0V9fk cQeDUG9ytJybUll14ygY0psq6y4AaBbq9xKHL6cFULAgkbaKE8DUXVlMIiarJ2a7y6kr JRvhyyrlHpdvQ6hxy+HGh1HMus8yal44Kd7bI=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I installed xen on top of Cent OS 5.3 64bit OS with gitco rpm sources.
Everything works fine except that I can't run 64bit pv guest with virsh command.
With xm commands I can load the same guest.
32bit pv guest, 32 bit and 64bit hvm works fine with both virsh and xm command.
Has anyon have any idea?
any help will be largely appreciated.
 
*This is dumpxml for 64bit configuration
 
<domain type='xen' id='8'>
  <name>VSP-test1-053b1653</name>
  <uuid>6631f11e-a824-5a10-d2ad-c5d63ce4faeb</uuid>
  <memory>24640512</memory>
  <currentMemory>524288</currentMemory>
  <vcpu>8</vcpu>
  <bootloader>/usr/bin/pygrub</bootloader>
  <os>
    <type>linux</type>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <devices>
    <disk type='file' device='disk'>
      <driver name='tap' type='aio'/>
      <source file='/IMAGEDATA/test1/private/test1-img-080191bb'/>
      <target dev='xvda' bus='xen'/>
    </disk>
    <disk type='file' device='disk'>
      <driver name='tap' type='aio'/>
      <source file='/METADATA/userspace_32_used_62251125869219855.img'/>
      <target dev='xvdb' bus='xen'/>
    </disk>
    <interface type='bridge'>
      <mac address='00:16:3e:34:1e:b0'/>
      <source bridge='eth0'/>
      <ip address='121.166.195.152'/>
      <script path='vif-bridge'/>
      <target dev='vif8.0'/>
    </interface>
    <interface type='bridge'>
      <mac address='00:16:3e:2d:bb:b6'/>
      <source bridge='eth1'/>
      <ip address='121.166.195.153'/>
      <script path='vif-bridge'/>
      <target dev='vif8.1'/>
    </interface>
    <interface type='bridge'>
      <mac address='00:16:3e:6f:07:f0'/>
      <source bridge='eth2'/>
      <ip address='121.166.195.154'/>
      <script path='vif-bridge'/>
      <target dev='vif8.2'/>
    </interface>
    <console type='pty' tty='/dev/pts/0'>
      <source path='/dev/pts/0'/>
      <target port='0'/>
    </console>
  </devices>
</domain>
*This is boot up message for guest
 
 
Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 console=xvc0)
Linux version 2.6.18-128.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 11:12:42 EST 2009
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 00000005e0700000 (usable)
No mptable found.
Built 1 zonelists.  Total pages: 6162176
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=xvc0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2659.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Software IO TLB disabled
Memory: 27500k/24648704k available (2447k kernel code, 496060k reserved, 1366k data, 180k init)
Calibrating delay using timer specific routine.. 6651.51 BogoMIPS (lpj=13303032)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 3F1B7A0 could not acquire Mutex [2] [20060707]
No dock devices found.
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 3F1B7A0 could not acquire Mutex [2] [20060707]
Initializing CPU#1
migration_cost=976
Brought up 2 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1258957208.210:1): initialized

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.