Re: [Xen-users] Error while compiling Xen

[Tej <bewith.tej@xxxxxxxxx>]

On Tue, Aug 11, 2009 at 5:50 PM, CB, Anantha Padmanabhan<cbananth@xxxxxx> wrote:
> Hi
> I tried the below command
>
> [root@Rhel52-Xen src]# hg clone 
> http://xenbits.xensource.com/linux-2.6.18-xen.hg
> abort: error: Connection timed out

I guess hg works with system wide proxy.
Just open a terminal
perform these two operation now (replace appropriate ip and port number)
1. export http_proxy=http://ip:port
2. hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg

HTH
>
> Still the same error persists.
> Should I change proxy settings for mercurial? From what I know hgrc file can 
> be used to change mercurial settings.
> But I am not able to locate hgrc file on my system at all. Is there any 
> workaround?
>
> Thanks & Regards
> Ananth
>
>
> -----Original Message-----
> From: Tej [mailto:bewith.tej@xxxxxxxxx]
> Sent: Tuesday, August 11, 2009 5:13 PM
> To: CB, Anantha Padmanabhan
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx; cbananth@xxxxxxxxx; Subba Rao, Sandeep M 
> (STSD)
> Subject: Re: [Xen-users] Error while compiling Xen
>
> On Tue, Aug 11, 2009 at 5:07 PM, CB, Anantha Padmanabhan<cbananth@xxxxxx> 
> wrote:
>> Hi,
>> I have set the proxy for the system. Infact I am able to access internet 
>> from the system.
>> I have made the necessary network connection settings in mozilla firefox.
>
> Firefox and Terminal does have different proxy setting.
>
> Run  following on a terminal and see what happens.
> hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg
>
>
>
>> Still I find the below error.
>>
>> select-repository: Searching `.:..' for linux-2.6.18-xen.hg
>> select-repository: Ignoring `.'
>> Unable to determine path to Linux source tree.
>> Falling back to linux-2.6.18-xen Mercurial repository.
>> Cloning http://xenbits.xensource.com/linux-2.6.18-xen.hg to 
>> linux-2.6.18-xen.hg.
>> abort: error: Connection timed out
>> make[2]: *** [linux-2.6.18-xen.hg/.valid-src] Error 255
>> make[2]: Leaving directory `/usr/src/xen-3.3.1'
>> make[1]: *** [linux-2.6-xen-install] Error 2
>> make[1]: Leaving directory `/usr/src/xen-3.3.1'
>> make: *** [install-kernels] Error 1
>>
>> Regards
>> Ananth
>>
>> -----Original Message-----
>> From: Tej [mailto:bewith.tej@xxxxxxxxx]
>> Sent: Tuesday, August 11, 2009 4:58 PM
>> To: CB, Anantha Padmanabhan
>> Cc: xen-users@xxxxxxxxxxxxxxxxxxx; cbananth@xxxxxxxxx; Subba Rao, Sandeep M 
>> (STSD)
>> Subject: Re: [Xen-users] Error while compiling Xen
>>
>> On Tue, Aug 11, 2009 at 4:15 PM, CB, Anantha Padmanabhan<cbananth@xxxxxx> 
>> wrote:
>>> Hi,
>>> I am facing the below error while compiling Xen 3.3.1 on an RHEL host.
>>>
>>> make[3]: Entering directory `/usr/src/xen-3.3.1'
>>> set -e ; \
>>>         if [ ! -e linux-2.6.18-xen.hg/.hg ] ; then \
>>>             __repo=$(sh buildconfigs/select-repository linux-2.6.18-xen.hg
>>> .:..) ; \
>>>             if [ -d ${__repo} ] ; then \
>>>                 echo "Linking ${__repo} to linux-2.6.18-xen.hg." ; \
>>>                 ln -s ${__repo} linux-2.6.18-xen.hg ; \
>>>             else \
>>>                 echo "Cloning ${__repo} to linux-2.6.18-xen.hg." ; \
>>>                 hg clone ${__repo#file://} linux-2.6.18-xen.hg ; \
>>>             fi ; \
>>>         else \
>>>             __parent=$(hg -R linux-2.6.18-xen.hg path default) ; \
>>>             echo "Pulling changes from ${__parent} into
>>> linux-2.6.18-xen.hg." ; \
>>>             hg -R linux-2.6.18-xen.hg pull ${__parent} ; \
>>>         fi
>>> select-repository: Searching `.:..' for linux-2.6.18-xen.hg
>>> select-repository: Ignoring `.'
>>> Unable to determine path to Linux source tree.
>>> Falling back to linux-2.6.18-xen Mercurial repository.
>>> Cloning http://xenbits.xensource.com/linux-2.6.18-xen.hg to
>>> linux-2.6.18-xen.hg.
>>> abort: error: Connection timed out
>>> make[3]: *** [linux-2.6.18-xen.hg/.valid-src] Error 255
>>> make[3]: Leaving directory `/usr/src/xen-3.3.1'
>>> make[2]: *** [linux-2.6-xen-install] Error 2
>>> make[2]: Leaving directory `/usr/src/xen-3.3.1'
>>> make[1]: *** [install-kernels] Error 1
>>> make[1]: Leaving directory `/usr/src/xen-3.3.1'
>>> make: *** [world] Error 2
>>
>> perform following step manually at one ditectory up from Xen source code.
>> hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg
>>
>> If same problem then,
>> mostly i think machine is behind proxy server if yes export proxy
>> server address first.
>>
>>>
>>> Please guide.
>>>
>>> Thank you
>>>
>>> Warm Regards
>>> Ananth
>>>
>>> _______________________________________________
>>> Xen-users mailing list
>>> Xen-users@xxxxxxxxxxxxxxxxxxx
>>> http://lists.xensource.com/xen-users
>>>
>>
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users