[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Ethernet bonding in fedora


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Fasiha Ashraf <feehapk@xxxxxxxxxxx>
  • Date: Fri, 15 May 2009 11:49:24 +0530 (IST)
  • Delivery-date: Thu, 14 May 2009 23:27:31 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.in; h=Message-ID:X-YMail-OSG:Received:X-Mailer:Date:From:Subject:To:MIME-Version:Content-Type; b=MEoZthRxmBet9Md0vXdyElaZbXHnsmC0IpB1lw4KAglATd23lrCroCSaG7aB/fH0ju3UzxIPu42wCocJXeweImQx78WswToVSYwJZrqBEv0FDJCCAItad3a9JaU3mspmMEIlEDthfn7Ip5uvJ3uomR8+ksnlYl92O/ft8FhnAy4=;
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I have combined the bandwidth of eth0 and eth1 in a virtual interface bond0, Fedora8 system. Now I am able to connect through this interface.

The probe is I am unable to check its settings with combined(doubled) Bandwidth using command
ethtool bond0
 but It shows the setting for each ethernet individually like this

 ethtool peth0
Settings for peth0:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes

ethtool eth1
Settings for eth1:
        Supported ports: [ TP ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Link detected: yes

Please tell me some way to check the settings of bond0.

Regards,

Fasiha Ashraf


Bollywood news, movie reviews, film trailers and more! Click here.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.