[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] IPv6 not working on with CentOS dom0
Hi,I'm having IPv6 problems with my CentOS 5.2 dom0 while the same NetBSD/i386 5.0 domU running on Debian 5.0 dom0 works as expected. CentOS is running gitco's Xen 3.3.1 packages and Debian is running self-compiled Xen 3.3.1. My dom0 kernels: # uname -srm Linux 2.6.18-92.1.22.el5xen x86_64 # uname -srm Linux 2.6.18.8-xen x86_64 My domU configuration file: name = 'p140' memory = 512 kernel = '/var/tmp/netbsd-XEN3PAE_DOMU.gz' disk = [ 'phy:/dev/iscsi/p140,sda,w' ] vif = [ 'mac=00:16:3e:01:40:01, bridge=vlan2000' ] My vlan2000 interface: # brctl show | grep vlan2000 vlan2000 8000.0015c5fc2806 no eth1.2000 # ifconfig eth1.2000 eth1.2000 Link encap:Ethernet HWaddr 00:15:C5:FC:28:06 inet6 addr: fe80::215:c5ff:fefc:2806/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1674 errors:0 dropped:0 overruns:0 frame:0 TX packets:75 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:170201 (166.2 KiB) TX bytes:14533 (14.1 KiB) # ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:15:C5:FC:28:06 inet addr:0.0.0.1 Bcast:0.0.0.1 Mask:255.255.255.255 inet6 addr: fe80::215:c5ff:fefc:2806/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4080 errors:0 dropped:0 overruns:0 frame:0 TX packets:3635 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:544726 (531.9 KiB) TX bytes:724917 (707.9 KiB) Interrupt:21 domU on CentOS dom0 ------------------- # sysctl -w net.inet6.ip6.accept_rtadv=1 net.inet6.ip6.accept_rtadv: 0 -> 1 # rtsol xennet0 (wait for a moment) # ifconfig xennet0 xennet0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500 capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx> enabled=0 address: 00:16:3e:01:40:01 inet6 fe80::216:3eff:fe01:4001%xennet0 prefixlen 64 scopeid 0x1 domU on Debian dom0 ------------------- # sysctl -w net.inet6.ip6.accept_rtadv=1 net.inet6.ip6.accept_rtadv: 0 -> 1 # rtsol xennet0 (wait for a moment) # ifconfig xennet0 xennet0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500 capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx> enabled=0 address: 00:16:3e:01:40:01 inet6 fe80::216:3eff:fe01:4001%xennet0 prefixlen 64 scopeid 0x1 inet6 2001:xxxx:xxxx:xxxx:216:3eff:fe01:4001 prefixlen 64 So, there's no IPv6 traffic when the domU is running on CentOS dom0. Any ideas? Martti _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |