Re: [Xen-users] eth2 instead of eth0.

["PCextreme B.V. - Wido den Hollander" <wido@xxxxxxxxxxxx>]

I think you udev rules are wrong.

Check /etc/udev/rules.d and something about persistent-net rules.

Did you swap your NIC recently? udev creates a unique ethX device for
each MAC address.

-  
Met vriendelijke groet,

Wido den Hollander
Hoofd Systeembeheer / CSO
Telefoon Support Nederland: 0900 9633 (45 cpm)
Telefoon Support BelgiÃ: 0900 70312 (45 cpm)
Telefoon Direct: (+31) (0)20 50 60 104
Fax: +31 (0)20 50 60 111
E-mail: support@xxxxxxxxxxxx
Website: http://www.pcextreme.nl
Kennisbank: http://support.pcextreme.nl/
Netwerkstatus: http://nmc.pcextreme.nl


On Tue, 2009-03-17 at 10:56 +0100, Mauro wrote:
> My network card is recognized as eth2 on my debian lenny system.
> In xen-config.sxp I've changed the line (network-script
> network-bridge) in (network-script 'network-bridge netdev=eth2'), then
> I reboot the system.
> Now ifconfig says :
> eth2      Link encap:Ethernet  HWaddr 00:22:64:f5:65:ca
>           inet addr:192.168.4.190  Bcast:192.168.5.255  Mask:255.255.254.0
>           inet6 addr: fe80::222:64ff:fef5:65ca/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:32575 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:645 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:2370788 (2.2 MiB)  TX bytes:98233 (95.9 KiB)
> 
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           inet6 addr: ::1/128 Scope:Host
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:8 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:560 (560.0 B)  TX bytes:560 (560.0 B)
> 
> peth2     Link encap:Ethernet  HWaddr 00:22:64:f5:65:ca
>           inet6 addr: fe80::222:64ff:fef5:65ca/64 Scope:Link
>           UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
>           RX packets:58788 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:647 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:11586733 (11.0 MiB)  TX bytes:101373 (98.9 KiB)
>           Interrupt:16 Memory:f8000000-f8012100
> 
> I don't have any vif interfaces.
> Where I do wrong?
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users