[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Error: pci: 0000:02:06.0 must be co-assigned to the same guest with 0000:02:05.0
Hi Velten, you could try to put the isdn card in a different pci-slot.You get around the "co-assigned" message with assigning the pci devices xen wants into one domU, however this might not be always possible ( eg. motherboard devices) However, i am testing xen3.3.1 on opensuse11 at the moment and it looks like the pv pci-passtrough is seriously broken.pv pci-passtrough worked wonderful in opensuse10.3 which xen 3.1. Trying the same ( with same domU config file) in xen3.3.1 just gives you the "co-assigned" and even worse, if you assign all pci devices xen wants in the domu, the domU starts, but it looks like the domU does not get the interrupt from the device. I believe the VT-d passtrough code messed up the pv passtrough, hope this gets fixed soon. Regards Frank next step... :) i got pcihiding on, with modprobe an manual hiding, but now # xm create auto/fli4l Using config file "/etc/xen/auto/fli4l". Error: pci: 0000:02:06.0 must be co-assigned to the same guest with 0000:02:05.0 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:06.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) i need the Ethernet controller in Fli4l-domain and the ISDN Controller in an asterisk domain.... how can i fix this ? _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |