|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Problem booting xen domU Guest
I´m trying to compile the new 2.6.28 vanilla kernel as domU guest. The kernel seems to work fine when I try to boot with it by its own. But when I try to boot this kernel as domU, he cant seem to find any devices. I cant seem to figure out where´s the problem. Any hints would be much appreciated. ###################################### [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28 (root@debian) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #8 SMP Thu Jan 1 02:23:26 CET 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Cyrix CyrixInstead [ 0.000000] NSC Geode by NSC [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] ACPI in unprivileged domain disabled [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000000a11000 (usable) [ 0.000000] Xen: 0000000000a11000 - 0000000000a54000 (reserved) [ 0.000000] Xen: 0000000000a54000 - 0000000010000000 (usable) [ 0.000000] DMI not present or invalid. [ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x1000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] RAMDISK: 007df000 - 00a11000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 256MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 10000000 [ 0.000000] low ram: 00000000 - 10000000 [ 0.000000] bootmap 00002000 - 00004000 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0010000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000200000 - 00007de780] TEXT DATA BSS ==> [0000200000 - 00007de780] [ 0.000000] #4 [00007df000 - 0000a11000] RAMDISK ==> [00007df000 - 0000a11000] [ 0.000000] #5 [0000a54000 - 0000a5c000] INIT_PG_TABLE ==> [0000a54000 - 0000a5c000] [ 0.000000] #6 [0000007000 - 000007f000] PGTABLE ==> [0000007000 - 000007f000] [ 0.000000] #7 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00010000 [ 0.000000] HighMem 0x00010000 -> 0x00010000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x00000a11 [ 0.000000] 0: 0x00000a54 -> 0x00010000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:f0000000) [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64861 [ 0.000000] Kernel command line: root=/dev/hda1 ro [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 2700.000 MHz processor. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [hvc0] enabled [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.004000] Memory: 250256k/262144k available (3560k kernel code, 11104k reserved, 1554k data, 344k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xf5618000 - 0xf57ff000 (1948 kB) [ 0.004000] pkmap : 0xf5200000 - 0xf5400000 (2048 kB) [ 0.004000] vmalloc : 0xd0800000 - 0xf51fe000 ( 585 MB) [ 0.004000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.004000] .init : 0xc0707000 - 0xc075d000 ( 344 kB) [ 0.004000] .data : 0xc057a06e - 0xc06feb54 (1554 kB) [ 0.004000] .text : 0xc0200000 - 0xc057a06e (3560 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] installing Xen timer for CPU 0 [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5400.00 BogoMIPS (lpj=10800000) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys devices [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] SMP alternatives: switching to UP code [ 0.058306] Freeing SMP alternatives: 18k freed [ 0.058381] cpu 0 spinlock event irq 1 [ 0.059521] Brought up 1 CPUs [ 0.059806] net_namespace: 776 bytes [ 0.059817] Booting paravirtualized kernel on Xen [ 0.059823] Xen version: 3.3.0 (preserve-AD) [ 0.059983] xor: automatically using best checksumming function: pIII_sse [ 0.076005] pIII_sse : 1873.000 MB/sec [ 0.076013] xor: using function: pIII_sse (1873.000 MB/sec) [ 0.076099] Grant table initialized [ 0.076149] NET: Registered protocol family 16 [ 0.077295] PCI: Fatal: No config space access function found [ 0.080163] ACPI: Interpreter disabled. [ 0.080538] xen_balloon: Initialising balloon driver. [ 0.082084] SCSI subsystem initialized [ 0.082270] usbcore: registered new interface driver usbfs [ 0.082352] usbcore: registered new interface driver hub [ 0.082415] usbcore: registered new device driver usb [ 0.082658] PCI: System does not support PCI [ 0.082665] PCI: System does not support PCI [ 0.082813] pnp: PnP ACPI: disabled [ 0.083336] NET: Registered protocol family 2 [ 0.083510] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.083768] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083809] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.083851] TCP: Hash tables configured (established 8192 bind 8192) [ 0.083860] TCP reno registered [ 0.083959] NET: Registered protocol family 1 [ 0.084128] checking if image is initramfs... it is [ 0.088186] Freeing initrd memory: 2248k freed [ 0.088430] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.088850] audit: initializing netlink socket (disabled) [ 0.088869] type=2000 audit(1230765978.923:1): initialized [ 0.089075] VFS: Disk quotas dquot_6.5.1 [ 0.089114] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.089314] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 0.089704] JFS: nTxBlock = 2065, nTxLock = 16524 [ 0.090447] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 0.090704] SGI XFS Quota Management subsystem [ 0.090721] msgmni has been set to 516 [ 0.090966] alg: No test for stdrng (krng) [ [ 0.248006] raid6: int32x2 1144 MB/s [ 0.316046] raid6: int32x4 1064 MB/s [ 0.384067] raid6: int32x8 714 MB/s [ 0.452013] raid6: mmxx1 2027 MB/s [ 0.520016] raid6: mmxx2 3445 MB/s [ 0.588037] raid6: sse1x1 1958 MB/s [ 0.656025] raid6: sse1x2 3245 MB/s [ 0.724015] raid6: sse2x1 3319 MB/s [ 0.792019] raid6: sse2x2 4205 MB/s [ 0.792027] raid6: using algorithm sse2x2 (4205 MB/s) [ 0.792035] md: raid6 personality registered for level 6 [ 0.792043] md: raid5 personality registered for level 5 [ 0.792050] md: raid4 personality registered for level 4 [ 0.792087] device-mapper: uevent: version 1.0.3 [ 0.792203] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 0.792215] cpuidle: using governor ladder [ 0.792223] No iBFT detected. [ 0.792668] TCP cubic registered [ 0.792675] NET: Registered protocol family 17 [ 0.792806] RPC: Registered udp transport module. [ 0.792813] RPC: Registered tcp transport module. [ 0.792837] IO APIC resources could be not be allocated. [ 0.792844] Using IPI No-Shortcut mode [ 0.793001] registered taskstats version 1 [ 0.892023] XENBUS: Device with no driver: device/console/0 [ 0.892057] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.892303] Freeing unused kernel memory: 344k freed [ 0.912479] Fusion MPT base driver 3.04.07 [ 0.912493] Copyright (c) 1999-2008 LSI Corporation [ 0.920669] Fusion MPT SPI Host driver 3.04.07 /bin/cat: /sys/block/sda/dev: No such file or directory Waiting 1 seconds for /sys/block/sda/dev to show up /bin/cat: /sys/block/sda/dev: No such file or directory Waiting 2 seconds for /sys/block/sda/dev to show up /bin/cat: /sys/block/sda/dev: No such file or directory Waiting 4 seconds for /sys/block/sda/dev to show up /bin/cat: /sys/block/sda/dev: No such file or directory ...... ###################################### _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |