--- On Fri, 12/26/08, David Koski <david@xxxxxxxxxxxxxxxx> wrote:
From: David Koski <david@xxxxxxxxxxxxxxxx>
Subject: Re: [Xen-users] Installing domU from ISO image file
To: xen-users@xxxxxxxxxxxxxxxxxxx, bderzhavets@xxxxxxxxx
Date: Friday, December 26, 2008, 2:12 PM
# uname -a
Linux northgate 2.6.24-22-xen #1 SMP Mon Nov 24 21:30:37 UTC 2008 i686
GNU/Linux
# xm info
host : northgate
release : 2.6.24-22-xen
version : #1 SMP Mon Nov 24 21:30:37 UTC 2008
machine : i686
nr_cpus : 1
nr_nodes : 1
cores_per_socket : 1
threads_per_core : 1
cpu_mhz :
3061
hw_caps :
bfebfbff:20000000:00000000:00000180:0000651d:00000000:00000001:00000000
virt_caps :
total_memory : 503
free_memory : 30
node_to_cpu : node0:0
node_to_memory : node0:30
xen_major : 3
xen_minor : 3
xen_extra : .0
xen_caps : xen-3.0-x86_32p
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xf5800000
xen_changeset : unavailable
cc_compiler : gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)
cc_compile_by : buildd
cc_compile_domain : buildd
cc_compile_date : Wed Oct 29 23:37:58 UTC 2008
xend_config_format : 4
# brctl show
bridge name bridge id STP enabled interfaces
eth1 8000.005004700f55 no peth1
# losetup
-a
(no output)
# egrep -v "(^$|^\#)" /etc/xen/cos52.cfg
name = "cos52"
memory = 512
Please,run before starting install :-
#losetup /dev/loop0 /etc/xen/iso/COS52.iso
Verify loop device is present:-
# losetup -a
/dev/loop0: [080b]:1046765 (/etc/xen/iso/COS52.iso)
Cat and paste into profile :-
disk = ['phy:/dev/loop0,hdc:cdrom,r','phy:/dev/vg00/elastix,xvda,w']
vif = [ 'bridge=eth1' ]
# disk = ['file:/etc/xen/iso/COS52.iso,ioemu:hdc:cdrom,r',
# 'phy:/dev/vg00/elastix,xvda1,w' ]
Two errors i guess :-
1. "ioemu" for paravirtual guest is incorrect
2. xvda not xvda1
# vif = [ '' ]
Bridge not specified
vfb = ["type=vnc,vncunused=1"]
bootloader = "/usr/bin/pygrub"
kernel = '/images/xen/vmlinuz'
ramdisk = '/images/xen/initrd.img'
vcpus = 1
Of course the above is without
mounting to loop. I have tried mounting to loop
with the same results.
Thank you,
David
On Friday 26 December 2008 10:59, Boris Derzhavets wrote:
> Please, submit outputs :-
>
> # uname -a
>
> # xm info
>
> # brctl show
>
> #losetup -a
>
> and profile cos52.cfg
>
> It should work, if everything is tuned well.
>
> --- On Fri, 12/26/08, David Koski <david@xxxxxxxxxxxxxxxx> wrote:
> From: David Koski <david@xxxxxxxxxxxxxxxx>
> Subject: Re: [Xen-users] Installing domU from ISO image file
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Friday, December 26, 2008, 1:23 PM
>
> I am running 2.6.24-22-xen kernel. It has been a while since I installed
> this and I have tried so many things that I can't remember how I
installed
> it but
> I do have backports in my
sources.list:
>
> deb http://ftp.osuosl.org/pub/ubuntu/ hardy-backports main restricted
> universe multiverse
>
> Anyhow, I did try booting 2.6.24-22 and 3.2 xen but I got:
>
> # xm create cos52.cfg -c
> Using config file "/etc/xen/cos52.cfg".
> Error: (38, 'Function not implemented')
>
> Thank you,
> David
>
> On Friday 26 December 2008 00:36, Boris Derzhavets wrote:
> > I've got it working on Hardy (native 3.2) Dom0 :-
> >
> > http://lxer.com/module/newswire/view/110642/index.html
> >
> > Intrepid Xen 3.3 Hypervisor may be back ported to Hardy Dom0 :-
> >
> > http://lxer.com/module/newswire/view/112045/index.html
> >
> > and i believe http://lxer.com/module/newswire/view/110642/index.html
> > may be reproduced at Xen 3.3 Hardy Dom0 (2.6.24-22-xen)
> >
> > In case
of Xen 3.3 complete port to Ubuntu Hardy , in general, it
should
> > (?) work as well, but instead of native vmlinuz-2.6.24-22-xen your
>
> system
>
> > is driven by vmlinuz-2.6.18.8-xen. View changes in profile.
> >
> > --- On Fri, 12/26/08, David Koski <david@xxxxxxxxxxxxxxxx>
wrote:
> > From: David Koski <david@xxxxxxxxxxxxxxxx>
> > Subject: [Xen-users] Installing domU from ISO image file
> > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > Date: Friday, December 26, 2008, 12:38 AM
> >
> > I am trying to install CentOS from an ISO image file but the
installer
>
> does
>
> > not see a CD-ROM drive. The VNC viewer works but the CentOS
installer
> > indicates "Unable to find any devices of the type needed for
this
> > installation type." Then it prompts with "[Select
driver]
[Use
>
> a
>
> > driver
> > disk] [Back]". I have tried several variations of the
>
> "disk"
>
> > paramater, all
> > with the same results. I also used losetup to attach the imate to
> > /dev/loop0 and tried the commented out "disk" parameters
with
>
> the same
>
> > results.
> >
> > xen is 3.3
> > OS is Ubuntu 8.04
> >
> > 1 name = "cos52"
> > 2 memory = 128
> > 3
> > 4
> > I've commented out this entries (B.D.)
> > ************************************************************
> > # disk = [ 'file:/etc/xen/iso/COS52.iso,ioemu:hdc:cdrom,r',
> > 'phy:/dev/vg00/elastix,xvda1,w' ]
> > #disk = [
>
> 'phy:loop0,hdc,r','phy:/dev/vg00/elastix,xvda1,w' ]
>
> >
*************************************************************
> > disk = [
>
>
'phy:/dev/loop0,hdc:cdrom,r','phy:/dev/vg00/elastix,xvda1,w' ]
>
> > 6
> > 7
> > 8 vif = [ '' ]
> > 9 vfb =
> >
["type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=kalamoja"]
> > 10
> > 11 bootloader = "/usr/bin/pygrub"
> > 12 kernel = '/images/xen/vmlinuz'
> > 13 ramdisk = '/images/xen/initrd.img'
> > 14
> > 15 vcpus = 1
> > 16
> > 17
> > 18
> >
> > Any suggestions?
> >
> > Regards,
> > David Koski
> > dkoski@xxxxxxxxxxx
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> >
http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
|
