[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Problem with start winxp on xen-3.3.0 using stubdom



According to xm li command’s output, your domain winxp-dm didn’t be created.

So I think you might trace the winxp-dm’s creating message, use the method I mentioned in previous mail (redirect the output message to xterm window)

 

Best regards

Wan Shuang


From: Niu Yan [mailto:vivian.niu@xxxxxxxxx]
Sent: 2008
1030 14:15
To: Wan, Shuang
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Problem with start winxp on xen-3.3.0 using stubdom

 

I have try with disk = [ 'file:/home/images/winxp.img,hda,w' ]  and set boot='c' ,  the result is the   same.

 

 

2008/10/30 Wan, Shuang <shuang.wan@xxxxxxxxx>

Hi NiuYan,

 

disk = [ 'phy:/dev/cdrom1,hdc:cdrom,r', 'file:/home/images/winxp.img,hda,w' ]

Enable the hdc:cdrom configuration option in disk section is a known issue to stubdom(tested changeset 18569), you can try to remove it.

And also there a another place you can catch many of useful log message, you can edit the /usr/lib/xen/bin/stubdom-dm, change the lines as bellow:

#(while true ; do sleep 60 ; done) | /bin/sh -c "$creation" &

xterm -geometry +0+0 -e /bin/sh -c "$creation ; echo ; echo press ENTER to shut down ; read" &

it will popup a xterm window,  you can see many of messages from that.

 

 

Best regards

Wan Shuang

 


From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Niu Yan
Sent: 2008
1030 10:50
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Problem with start winxp on xen-3.3.0 using stubdom

 

There is some messages talking about start windows using stubdom on  xen-devel@xxxxxxxxxxxxxxxxxxx, but i think it may be more proper to send it here.

---------------------------

I have start winxp on xen-3.2.0 normally, but I want to use stubdom , so I try it with xen-3.3.0, I followed the steps in stubdom/README, including:

 

$ mkdir -p /exports/usr/share/xen/qemu

$ ln -s /usr/share/xen/qemu/keymaps /exports/usr/share/xen/qemu

$ mkdir -p /exports/var/lib

$ ln -s /var/lib/xen /exports/var/lib

$ /usr/sbin/fs-backend &

 

$ xm create winxp

 

except name the configuration file with 'winxp' and 'winxp-dm'. They are as follows:

 

$ cat /etc/xen/winxp

kernel = "/usr/lib/xen/boot/hvmloader"

builder='hvm'

memory = 1280

name = "winxp"

vif = [ 'type=ioemu, bridge=xenbr0' ]

device_model = '/usr/lib/xen/bin/stubdom-dm'

boot="dc"

sdl=0

opengl=0

vnc=0

vncpasswd=''

stdvga=0

 

 

$ cat /etc/xen/winxp-dm

kernel = "/usr/lib/xen/boot/ioemu-stubdom.gz"

vif = [ '', 'type=ioemu, bridge=xenbr0' ]

disk = [ 'phy:/dev/cdrom1,hdc:cdrom,r', 'file:/home/images/winxp.img,hda,w' ]

 

 

But the sdl window closed quickly after two blink. 

$  xm list

Name                                        ID   Mem VCPUs      State   Time(s)

Domain-0                                   0  1280     4     r-----     86.6

winxp                                          7  1280     1     ------      0.0

 

$ xm dmesg

(XEN) AMD SVM: ASIDs disabled.

(XEN) CPU1: AMD K8 machine check reporting enabled.

(XEN) CPU1: AMD Dual-Core AMD Opteron(tm) Processor 2212 stepping 02

(XEN) Booting processor 2/2 eip 8c000

(XEN) AMD SVM: ASIDs disabled.

(XEN) CPU2: AMD K8 machine check reporting enabled.

(XEN) CPU2: AMD Dual-Core AMD Opteron(tm) Processor 2212 stepping 02

(XEN) Booting processor 3/3 eip 8c000

(XEN) AMD SVM: ASIDs disabled.

(XEN) CPU3: AMD K8 machine check reporting enabled.

(XEN) CPU3: AMD Dual-Core AMD Opteron(tm) Processor 2212 stepping 02

(XEN) Total of 4 processors activated.

(XEN) ENABLING IO-APIC IRQs

(XEN)  -> Using new ACK method

(XEN) checking TSC synchronization across 4 CPUs: passed.

(XEN) Platform timer is 25.000MHz HPET

(XEN) Brought up 4 CPUs

(XEN) I/O virtualisation disabled

(XEN) *** LOADING DOMAIN 0 ***

(XEN)  Xen  kernel: 32-bit, PAE, lsb

(XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc045257c

(XEN) PHYSICAL MEMORY ARRANGEMENT:

(XEN)  Dom0 alloc.:   000000003e000000->000000003f000000 (323584 pages to be allocated)

(XEN) VIRTUAL MEMORY ARRANGEMENT:

(XEN)  Loaded kernel: c0100000->c045257c

(XEN)  Init. ramdisk: c0453000->c0ba2c00

(XEN)  Phys-Mach map: c0ba3000->c0ce3000

(XEN)  Start info:    c0ce3000->c0ce3474

(XEN)  Page tables:   c0ce4000->c0cf1000

(XEN)  Boot stack:    c0cf1000->c0cf2000

(XEN)  TOTAL:         c0000000->c1000000

(XEN)  ENTRY ADDRESS: c0100000

(XEN) Dom0 has maximum 4 VCPUs

(XEN) Scrubbing Free RAM: ..........................done.

(XEN) Xen trace buffers: disabled

(XEN) Std. Loglevel: Errors and warnings

(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)

(XEN) Xen is relinquishing VGA console.

(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)

(XEN) Freed 100kB init memory.

(XEN) mtrr: type mismatch for f0000000,2000000 old: write-back new: write-combining

 

$ cat /var/log/xen/qemu-dm-winxp.log

Using config file "/etc/xen/winxp-dm".

Started domain winxp-dm

 

$ cat /var/log/xen/xend-debug.log

qemu: the number of cpus is 1

Xend started at Wed Oct 29 21:07:04 2008.

 

$ cat /var/log/xen/xend.log

[2008-10-29 21:07:07 3422] DEBUG (XendDomainInfo:1443) XendDomainInfo.handleShutdownWatch

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vif.

[2008-10-29 21:07:07 3422] DEBUG (DevController:160) Waiting for 0.

[2008-10-29 21:07:07 3422] DEBUG (DevController:645) hotplugStatusCallback /local/domain/0/backend/vif/9/0/hotplug-status.

[2008-10-29 21:07:07 3422] DEBUG (DevController:659) hotplugStatusCallback 1.

[2008-10-29 21:07:07 3422] DEBUG (DevController:160) Waiting for 1.

[2008-10-29 21:07:07 3422] DEBUG (DevController:645) hotplugStatusCallback /local/domain/0/backend/vif/9/1/hotplug-status.

[2008-10-29 21:07:07 3422] DEBUG (DevController:659) hotplugStatusCallback 1.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vscsi.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vbd.

[2008-10-29 21:07:07 3422] DEBUG (DevController:160) Waiting for 5632.

[2008-10-29 21:07:07 3422] DEBUG (DevController:645) hotplugStatusCallback /local/domain/0/backend/vbd/9/5632/hotplug-status.

[2008-10-29 21:07:07 3422] DEBUG (DevController:645) hotplugStatusCallback /local/domain/0/backend/vbd/9/5632/hotplug-status.

[2008-10-29 21:07:07 3422] DEBUG (DevController:659) hotplugStatusCallback 1.

[2008-10-29 21:07:07 3422] DEBUG (DevController:160) Waiting for 768.

[2008-10-29 21:07:07 3422] DEBUG (DevController:645) hotplugStatusCallback /local/domain/0/backend/vbd/9/768/hotplug-status.

[2008-10-29 21:07:07 3422] DEBUG (DevController:659) hotplugStatusCallback 1.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices irq.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vkbd.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vfb.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices console.

[2008-10-29 21:07:07 3422] DEBUG (DevController:160) Waiting for 0.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices pci.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices ioports.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices tap.

[2008-10-29 21:07:07 3422] DEBUG (DevController:155) Waiting for devices vtpm.

[2008-10-29 21:07:07 3422] WARNING (XendDomainInfo:1617) Domain has crashed: name=winxp-dm id=9.

[2008-10-29 21:07:08 3422] ERROR (XendDomainInfo:1755) VM winxp-dm restarting too fast (1.624753 seconds since the last restart).  Refusing to restart to avoid loops.

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:2389) XendDomainInfo.destroy: domid=9

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:2406) XendDomainInfo.destroyDomain(9)

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1939) Destroying device model

[2008-10-29 21:07:08 3422] WARNING (image:472) domain winxp-dm: device model failure: no longer running; see /var/log/xen/qemu-dm-

 

$ cat winxp-dm.log

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1946) Releasing devices

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vif/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vif/1

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vif, device = vif/1

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vbd/5632

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/5632

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vbd/768

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vbd, device = vbd/768

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vkbd/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vkbd, device = vkbd/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing vfb/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = vfb, device = vfb/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1952) Removing console/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:888) XendDomainInfo.destroyDevice: deviceClass = console, device = console/0

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1944) No device model

[2008-10-29 21:07:08 3422] DEBUG (XendDomainInfo:1946) Releasing devices

 

----------

vivian

 




--
Best regards,
钮艳

北京北京大学微处理器研发中心

Tel
010-58876266-665

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.