|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Problem with VT-d on Mainboard Intel DQ45CB
Hello Todd, thank you for your comments. I did not have time yet to follow your suggestions (I certainly will). > To get to the point where you can be helpful, you will need to get the > latest xen-unstable. > > hg clone http://xenbits.xensource.com/xen-unstable.hg > hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg > cd xen-unstable > make world However, yesterday I was able to make some progress with respect to the Intel board DQ45CB that solves most of my problems. It seems that most problems were caused by the board and not Xen! I think it is important to share my new experience as early as possible in order to prevent others for suffering in vain or doing unneccessary error analysis. Some days ago Intel put a new firmware for the board onto their WEB-site CBQ4510H.86A.0061.BI.ZIP I upgraded my board from CBQ4510H.86A.0059 with that new BIOS and the following problems seem to have vanished: Summary: ======== Update to BIOS CBQ4510H.86A.0061.BI.ZIP solved the following issues: - Whenever I boot my Xen 2.6.18.8 (Xen 3.3) with kernel parameter iommu=1 the boot process freezes. SOLVED (details below) and related to that - VT-d broken. No PCI backend hiding with HVM guest possible SOLVED (details below) - When I insert a PCIe x16 Graphics card (ATI Radeon HD 2400 Pro) the BIOS menu display somehow becomes slow. The experience is like if you use a 300 Baut serial line connection. SOLVED (details below) - PCIe x16 graphics with Xen kernel broken SOLVED (details below) I will also post the above short note on xen-devel Regards, Franz ############################## Details: My current setup: Xen Source: http://bits.xensource.com/oss-xen/release/3.3.0/xen-3.3.0.tar.gz Xen Kernel: hg clone http://xenbits.xensource.com/linux-2.6.18-xen.hg Details for the solved issues: ====================== - Whenever I boot my Xen 2.6.18.8 (Xen 3.3) with kernel parameter iommu=1 the boot process freezes. (SOLVED) After the BIOS update the Xen kernel boots without problems even if I use the iommu=1 #---------------------------- - VT-d broken. No PCI backend hiding with HVM guest possible (SOLVED) PCI backend hideing and VT-d seem to work now! The functionality 'pciback' is compiled fixed into my kernel (not a module). I use the following grub config title Xen 3.3.0 / kernel 2.6.18.8-xen with IOMMU=1 and backhide 1G NIC root (hd0,0) kernel /xen-3.3.0.gz console=vga noreboot max_loop=128 dom0_mem=1024M iommu=1 module /vmlinuz-2.6.18.8-xen root=/dev/mapper/RootVG-root ro pciback.hide=(03:00.0) module /initrd-2.6.18.8-xen.img The messages/dmesg show kernel: Bootdata ok (command line is root=/dev/mapper/RootVG-root ro pciback.hide=(03:00.0)) ... kernel: pciback 0000:03:00.0: seizing device The xm dmesg shows: (XEN) Xen version 3.3.0 (root@xxxxxxxxx) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Tue Oct 21 16:22:47 CEST 2008 (XEN) Latest ChangeSet: unavailable (XEN) Command line: console=vga noreboot max_loop=128 dom0_mem=1024M iommu=1 (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) EDID info not retrieved because of reasons unknown (XEN) Disc information: (XEN) Found 2 MBR signatures (XEN) Found 2 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 0000000000096400 (usable) (XEN) 0000000000096400 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bfade000 (usable) (XEN) 00000000bfade000 - 00000000bfb21000 (ACPI NVS) (XEN) 00000000bfb21000 - 00000000bfc3f000 (reserved) (XEN) 00000000bfc3f000 - 00000000bfc42000 (ACPI NVS) (XEN) 00000000bfc42000 - 00000000bfd42000 (reserved) (XEN) 00000000bfd42000 - 00000000bfd43000 (ACPI NVS) (XEN) 00000000bfd43000 - 00000000bfd48000 (reserved) (XEN) 00000000bfd48000 - 00000000bfd50000 (ACPI data) (XEN) 00000000bfd50000 - 00000000bfd6b000 (ACPI NVS) (XEN) 00000000bfd6b000 - 00000000bfd8a000 (reserved) (XEN) 00000000bfd8a000 - 00000000bfd90000 (ACPI NVS) (XEN) 00000000bfd90000 - 00000000bff00000 (usable) (XEN) 00000000fed1c000 - 00000000fed20000 (reserved) (XEN) 00000000ff000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 000000023c000000 (usable) (XEN) System RAM: 8123MB (8318864kB) (XEN) ACPI: RSDP 000F03C0, 0024 (r2 INTEL) (XEN) ACPI: XSDT BFD4EE18, 005C (r1 INTEL DQ45CB 3D MSFT 10013) (XEN) ACPI: FACP BFD4DD98, 00F4 (r4 INTEL A M I 6222004 MSFT 10013) (XEN) ACPI: DSDT BFD48018, 4E9A (r1 INTEL DQ45CB 3D INTL 20051117) (XEN) ACPI: FACS BFD56F40, 0040 (XEN) ACPI: APIC BFD4DF18, 006C (r2 INTEL DQ45CB 3D MSFT 10013) (XEN) ACPI: MCFG BFD58E18, 003C (r1 INTEL DQ45CB 3D MSFT 97) (XEN) ACPI: ASF! BFD57D18, 00A0 (r32 INTEL DQ45CB 3D TFSM F4240) (XEN) ACPI: SPCR BFD58D18, 0050 (r1 INTEL DQ45CB 3D AMI. 3) (XEN) ACPI: TCPA BFD58C98, 0032 (r2 INTEL DQ45CB 3D MSFT 1000013) (XEN) ACPI: DMAR BFD42F18, 00D8 (r1 INTEL DQ45CB 3D INTL 1) (XEN) Xen heap: 14MB (14496kB) (XEN) Domain heap initialised (XEN) Processor #0 7:7 APIC version 20 (XEN) Processor #1 7:7 APIC version 20 (XEN) Processor #2 7:7 APIC version 20 (XEN) Processor #3 7:7 APIC version 20 (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Intel VT-d has been enabled (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2833.076 MHz processor. (XEN) HVM: VMX enabled (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 (XEN) Booting processor 1/1 eip 8c000 (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 (XEN) Booting processor 2/2 eip 8c000 (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 (XEN) Booting processor 3/3 eip 8c000 (XEN) CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 3.579MHz ACPI PM Timer (XEN) Brought up 4 CPUs (XEN) I/O virtualisation enabled (XEN) I/O virtualisation for PV guests disabled (XEN) mtrr: your CPUs had inconsistent fixed MTRR settings (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805c050c (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000230000000->0000000232000000 (253952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff805c050c (XEN) Init. ramdisk: ffffffff805c1000->ffffffff81506800 (XEN) Phys-Mach map: ffffffff81507000->ffffffff81707000 (XEN) Start info: ffffffff81707000->ffffffff817074a4 (XEN) Page tables: ffffffff81708000->ffffffff81717000 (XEN) Boot stack: ffffffff81717000->ffffffff81718000 (XEN) TOTAL: ffffffff80000000->ffffffff81800000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: .....................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: Errors and warnings (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 108kB init memory. (XEN) mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining In the config of the HVM WinXP guest I use: pci=[ '03:00.0' ] In the running guest I see a new (native) 1Gbit NIC. I did not do any performance test yet. However the VT-d/PCI backend hide mechanism seems to work :-) #---------------------------- - When I insert a PCIe x16 Graphics card (ATI Radeon HD 2400 Pro) the BIOS menu display somehow becomes slow. The experience is like if you use a 300 Baut serial line connection. (SOLVED) Details see next paragraph - PCIe x16 graphics with Xen kernel broken SOLVED After the BIOS update I tested two PCIe x16 graphics adapters: - ATI Radeon HD 2400 Pro - MSI NX 8400GS (Nvidia 8400GS) Both cards run now without problems on a non-Xen standard Debian etch 2.6.18.6 kernel. Especially, the BIOS menus are no longer slowed down. 3D runs perfectly with the propriatary drivers ATI: ati-driver-installer-8-5-x86.x86_64.run NVIDIA: NVIDIA-Linux-x86_64-177.80-pkg2.run Caveat: after testing the Nvida Card/Driver you need to remove some links that point to NVIDIA drivers before you test again the ATI card/driver. Search /usr/lib for files like with '*177.80*' in them. With the xen-kernel 2.6.18.8 booted (details about version above) I was able to configure the ATI card for X11 by using the ATI driver ati-driver-installer-8-5-x86.x86_64.run. However, 3D s broken due to a problem with symbols Oct 27 10:09:09 susi kernel: fglrx: Unknown symbol xen_invlpg_mask With the xen-kernel 2.6.18.8 booted (details about version above) I was not able to compile the NVIDIA driver NVIDIA-Linux-x86_64-177.80-pkg2.run The build script from NVIDIA expclicitly states that it won't not run on a XEN-kernel #----------------------- Details about BIOS update I download the archive CBQ4510H.86A.0061.BI.ZIP from the Intel page I had quite some hard time to install the update via the DOS-Utility IFLASH.EXE on a host without FD-drive and only linux installed on the HDs. After frantically searching for some old Win boot media I came up with a good old Win98SE2 boot CD. It has the nice feature to recognize USB sticks as FD disk drive B: Then I proceeded as follows. (Shame on me that I do not know how to do it better with purely Linux and freeDos basis Is anybody out there who can educate me?) Unpack the zip archive. This yields CB0061.BIO CB0061.ITK IFLASH.EXE Copy these files to a USB stick with FAT FS Reboot the host and enter BIOS Set Advanced/Drives Disk mode from RAID to IDE This allows for a proper Win98SE2 boot from CD Boot a Win98SE2 CD. It will recognize the USB stick as drive b: b: iflash /PF CB0061.BIO When prompted - remove CD - remove USB stick type return an wait until BIOS flash has finished It takes about 3-5 minutes _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |