[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Problems with >4GB memory with 64-bit Xen kernel



On May 27, 2008, at 1:46 PM, Ross S. W. Walker wrote:

Matthew Ragan wrote:

I've been running the 64-bit version of the Xen 3.1.4 hypervisor with
a NetBSD (recent -current) dom0 for a number of weeks now, and haven't
had any real problems with it.  Previously, the system that I am
running this on (Dell Dimension E510, Pentium D 940) has been running
fine with 1GB of memory in the system.  Because I want to use this
system to house a number of database VMs that may chew memory, I put
8GB in the system today, and now the system refuses to boot unless I
specify 'mem=4G', which somewhat defeats the purpose of having 8GB in
the box.

I know other people have more than 4GB in their running systems, and
NetBSD boots fine and finds all 8G when I boot it without using Xen,
so I'm not sure what the issue is.  I've tried this with a number of
different 3.1.0 and 3.2.x kernels, and all have similar problems.
Setting 'mem=' to other values above 4GB results in the same errors,
except for the ending value in the last (usable) line.

Boot shows:

(XEN) Command line: (hd0,3,a)/xen.gz dom0_mem=256m
(XEN)  0000000000000000 - 0000000000000000 (usable)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000010000 - 00000000dfe88000 (usable)
(XEN)  00000000dfe88c00 - 00000000dfe8ac00 (ACPI NVS)
(XEN)  00000000dfe8ac00 - 00000000dfe8cc00 (ACPI data)
(XEN)  00000000dfe8cc00 - 00000000e0000000 (reserved)
(XEN)  00000000f0000000 - 00000000f4000000 (reserved)
(XEN)  00000000fec00000 - 00000000fed00400 (reserved)
(XEN)  00000000fed20000 - 00000000feda0000 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000200000000 (usable)
(XEN) System RAM: 7678MB (7862432kB)
(XEN) Xen heap: 13MB (14032kB)
(XEN) Domain heap initialised: DMA width 32 bits
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Early fatal page fault at e008:ffff8300001129d4
(cr2=ffffffffffffffff, ec=0002)
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
(XEN) Unknown interrupt

You need to make sure the dom0 kernel is compiled PAE.

-Ross

The dom0 kernel is 64-bit, and the Xen kernel doesn't even get to the point of starting the dom0.

 -- Matt

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.