[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Re: eth1 changed to __tmp78668633 in recent kernels
Am Donnerstag, den 15.05.2008, 13:06 +0200 schrieb henry ritzlmayr: > Hi list, > > kernel-xen-2.6.18-53.1.14.el5 and > kernel-xen-2.6.18-53.1.19.el5 > do not detect/initialize/whatever my eth1 network card any more. > > With > kernel-xen-2.6.18-53.1.13.el5 > everything is working as expected. > > With the two recent kernels I only get an Interface named __tmp786686833 > which is not added to xenbr... > > lspci -v to the adapter in question says > > 02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet > Controller (Copper) (rev 06) > Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter > Flags: bus master, fast devsel, latency 0, IRQ 17 > Memory at febe0000 (32-bit, non-prefetchable) [size=128K] > Memory at febc0000 (32-bit, non-prefetchable) [size=128K] > I/O ports at ec00 [size=32] > Expansion ROM at feba0000 [disabled] [size=128K] > Capabilities: [c8] Power Management version 2 > Capabilities: [d0] Message Signalled Interrupts: 64bit+ > Queue=0/0 Enable- > Capabilities: [e0] Express Endpoint IRQ 0 > > ip link says > > 2: __tmp786686833: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000 > link/ether 00:1b:21:0e:a9:3b brd ff:ff:ff:ff:ff:ff > > In modprobe.conf I have > alias eth1 e1000 > for the adapter in question. The module itself is loaded. > > > > Any Ideas how to fix this? > > cheers > Henry Sorry for the noise - this should have gone into the CentOS List. cheers Henry _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |