[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] RE: domU on v3.2 is not booting



thanks for the reply Jon. 
But that kernel option didn't work for me.
filesystem seems to be corrupted, so I ran fsck.ext3 disk1.
After that the below mentioned EXT3 boot error is disappeared.
Still the domU kernel 2.6.18.8 is getting hanged.

Then I installed the kernel in v3.1 using make install-kernels.
this kernel(2.6.8) is booting well.
So I feel I have missed to copy some kernel related stuffs to disk1.
I have copied all lib modules of 2.6.18.8 to disk1. Anything else I need
to copy to disk image?

thanks
Masroor.

Date: Wed, 27 Feb 2008 10:27:30 -0900
From: jonr@xxxxxxxxxx
Subject: Re: [Xen-users] domU on v3.2 is not booting
To: xen-users@xxxxxxxxxxxxxxxxxxx
Message-ID: <20080227102730.6n0032b34g4o0gcg@xxxxxxxxxxxxxx>
Content-Type: text/plain;       charset=ISO-8859-1;     DelSp="Yes";
        format="flowed"

Quoting Masroor Vettuparambil <Masroor.Vettuparambil@xxxxxxxxxxxx>:

> hi all,
>
> I installed v3.2 from source and now dom0 is booting well. But when I 
> tried to start domU it shows the following error message and seems 
> hanging.
>
> EXT3-fs: mounted filesystem with ordered data mode.
> EXT3-fs warning: mounting unchecked fs, running e2fsck is recommended
> EXT3 FS on hda1, internal journal
> device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
> dm-devel@xxxxxxxxxx
> EXT3-fs error (device hda1): ext3_free_blocks_sb: bit already cleared 
> for block Aborting journal on device hda1.
> EXT3-fs error (device hda1) in ext3_reserve_inode_write: Journal has 
> aborted EXT3-fs error (device hda1) in ext3_truncate: Journal has 
> aborted EXT3-fs error (device hda1) in ext3_reserve_inode_write: 
> Journal has aborted EXT3-fs error (device hda1) in ext3_orphan_del: 
> Journal has aborted EXT3-fs error (device hda1) in 
> ext3_reserve_inode_write: Journal has aborted EXT3-fs error (device 
> hda1) in ext3_delete_inode: Journal has aborted ext3_abort called.
> EXT3-fs error (device hda1): ext3_journal_start_sb: Detected aborted 
> journal Remounting filesystem read-only
> audit(1204110895.260:2): audit_pid=0 old=0 by auid=4294967295
> audit(1204110895.270:3): audit_backlog_limit=256 old=64 by
> auid=4294967295
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
>
> the configuration file is,
>
> kernel = "/boot/vmlinuz-2.6.18.8-xen"
> ramdisk = "/boot/initrd-2.6.18.8-xen"
> memory = 256
> name = "VM1"
> vif = [ 'mac=00:16:3e:00:00:11, bridge=eth2' ] disk = [ 
> 'file:/home/xen/images/disk1,hda1,w' ] root = "/dev/hda1"
> extra = "3"
>
> the file image disk1 was worked with the kernel 2.6.18 that is coming 
> with v3.1.
>
> Any idea?
>
> regards
> Masroor
>
Substitute your 'extra' line with this one:

extra = 'xencons=tty0'

Hope that helps,

Jon




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.