[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Networking
Hi all, I've got a problem with Xen Network Configuration. I want to create a Bridge between domU interfaces and a Dummy Interface in dom0 and then route all traffic towards my wlan0 interface connected to Internet. Xen seems to configure all in this way but my domU is isolated from the rest of the network. This is my domU Network configuration: vif=['type=ioemu,bridge=xenbr0'] This is my xend-config.sxp: (network-script 'network-bridge-dummy0 netdev=dummy0 bridge=xenbr0') (vif-script vif-bridge) This is my resultant dom0 ifconfig: dummy0 Link encap:Ethernet HWaddr EE:0D:86:B6:85:55 inet addr:10.0.0.1 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::ec0d:86ff:feb6:8555/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2428 (2.3 Kb) eth0 Link encap:Ethernet HWaddr 00:1B:FC:CF:EE:82 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:23 Base address:0x4000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:58 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5678 (5.5 Kb) TX bytes:5678 (5.5 Kb) pdummy0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:2338 (2.2 Kb) vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2428 (2.3 Kb) TX bytes:0 (0.0 b) vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:48 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) wlan0 Link encap:Ethernet HWaddr 00:1B:11:09:A6:17 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21b:11ff:fe09:a617/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:188552 errors:0 dropped:26 overruns:26 frame:26 TX packets:150566 errors:0 dropped:20 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:129629523 (123.6 Mb) TX bytes:32095042 (30.6 Mb) xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1700 (1.6 Kb) TX bytes:168 (168.0 b) xenbr2000 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:258 (258.0 b) This domU ifconfig: eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.0.0.2 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:2027 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1108 errors:0 dropped:0 overruns:0 frame:0 TX packets:1108 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:105062 (102.5 KB) TX bytes:105062 (102.5 KB) This is my dom0 bridge configuration: bridge name bridge id STP enabled interfaces xenbr0 8000.feffffffffff no vif0.0 pdummy0 vif1.0 xenbr2000 8000.000000000000 no xenbr2000 is a bridge created by xend on start because it misread wlan0 configuration. Could Anyone help me to resolve this situation? If I ping from dom0 to 10.0.0.2 I see (tcpdump) packets on all the bridge interfaces, If I ping from domU to 10.0.0.1 I can't see any packet on the bridge. TIA, d4lamar _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |