[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] xen-3.1 IPMI sensor (fwd)




Hallo *!


I have a board SE7501HG2.

- On 2.6.18 ipmitool works succefull.
  On Xen-3.1 (2.6.18) ipmitool say:

# ipmitool sensor
WARNING: Unknown SDR repository version 0x00
SDR record id 0x0000: invalid length 0

  (see thread [ipmitool-devel] Unknown SDR version)

- On page [4] as written:
 ipmitool -> BMC ---> i2c/smbus
                  '-> SDR

- On Thread [9] was written:
  Workaround: disable buggy IPMI/BMC on NetXtreme II
  The problem is: i have not NetXtreme, but "Intel(R) PRO/1000"

Is it always still the cause for this problem?


- a previous tests result: ipmi must be running on node 254.
  But this is connect to gntdev:

  # cat /proc/devices | egrep "ipmi|254"
  251 ipmidev
  254 gntdev

- gntdev seen match to CONFIG_XEN_GRANT_DEV


What can i do?



 Xen version 3.1.0 (root@xxxxxxxxxxxxxxx) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) Fri Nov 30 13:20:15 CET 2007

# ipmitool -V
ipmitool version 1.8.8

# lsmod | grep ipmi
ipmi_si                33740  0
ipmi_devintf            7816  0
ipmi_msghandler        31680  2 ipmi_si,ipmi_devintf

# ls /proc/bus
input  pci  usb

# lspci | grep  SMB
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)


[4] http://it-dep-fio-ds.web.cern.ch/it-dep-fio-ds/Presentations/2004/ipmi_serve
r_management.ppt PP Intelligent Platform Management Interface

[9] http://lists.xensource.com/archives/html/xen-users/2006-11/msg00465.html
   [Xen-users] Re: Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
   - workaround: dis. IPMI on networkadapter



regards Heiko
LauNOC



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.