Re: [Xen-users] domU does not see the pci nic - pci passthrough

[Mark Williamson <mark.williamson@xxxxxxxxxxxx>]

Hi Marco,

Everything you've shown looks OK as far as it goes...  Weird that the guest 
isn't working for you.

What does lspci in the guest give?

What distro are you runing in the dom0 and domU?  Where have your Xen-enabled 
kernels come from?  Self compiled, or distro packages?  Does your domU 
definitely have an installed driver for the device?

Cheers,
Mark

On Monday 03 December 2007, Marco Strullato wrote:
> Hi all!
> I want to assign a physical network card  (e100) to a domU:
> I think  Dom0 is ok but domU does not recognize the pci nic.
>
> into DomU I don't know wath should I see: I have nothing in dmesg nor in
> messages...
>
> Into Dom0 I have
>
> this modules.conf:
> options pciback hide=(0000:03: 08.0)
> install e100 /sbin/modprobe pciback; /sbin/modprobe --ignore-install e100
>
> This is dmesg:
> pciback 0000:03:08.0: seizing device
> ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 21
> ACPI: PCI interrupt for device 0000:03:08.0 disabled
> tg3.c:v3.65-rh (November 20, 2006)
> ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 22
> eth0: Tigon3 [partno(BCM95703A30U_HYB) rev 1100 PHY(5703)]
> (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:10:18:24:d2:a6
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
> TSOcap[1]
> eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
>
> this is the lspci line:
> 03:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet
> Controller (rev 02)
>
> this is the content of the dir /lrwxrwxrwx 1 root root    0 Dec  3 16:07
> 0000:03:08.0 -> ../../../../devices/pci0000:00/0000:00:1e.0/0000:03:08.0
> --w------- 1 root root 4096 Dec  3 16:07 bind
> lrwxrwxrwx 1 root root    0 Dec  3 16:07 module ->
> ../../../../module/pciback
> --w------- 1 root root 4096 Dec  3 16:07 new_id
> --w------- 1 root root 4096 Dec  3 16:07 new_slot
> -rw------- 1 root root 4096 Dec  3 16:07 permissive
> -rw------- 1 root root 4096 Dec  3 16:07 quirks
> --w------- 1 root root 4096 Dec  3 16:07 remove_slot
> -r-------- 1 root root 4096 Dec  3 16:07 slots
> --w------- 1 root root 4096 Dec  3 16:07 unbindsys/bus/pci/drivers/pciback/
>
> This is the domU confguration file:
> name = "VMTEST"
> memory = "256"
> disk = [ 'phy:/dev/VolGroup00/VMTEST,xvda,w', ]
> vif = [ 'mac=00:16:3e:21:33:b2, bridge=xenbr0', ]
> uuid = "a1532b7c-5aa4-3eb5-a150-930402abd72f"
> bootloader="/usr/bin/pygrub"
> vcpus=2
> on_reboot   = 'restart'
> on_crash    = 'restart'
> pci = ['03.08.0']



-- 
Dave: Just a question. What use is a unicyle with no seat?  And no pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users