[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Error: Device 0 (vif) could not be connected. Could not find bridge....
[Please cc me for the reply since I am not on the list] Hi all, I am new to Xen and I ran into some problem when trying to xm create a FC6 domU with Xen 3.1. My dom0 is a FC5 running the 2.6.18-xen kernel. This might just be a stupid configuration issue that I am not aware of so please bear with me. Here is what my cfg file looks like: kernel = "/boot/vmlinuz-2.6.18-xen" memory = 256 name = "fedora.fc6" disk = ['file:/home/ljohnson/stuff/xen/fc6/fedora.fc6.img,sda1,w', 'file:/home/ljohnson/stuff/xen/fc6/fedora.swap,sda2,w'] root = "/dev/sda1 ro" vif = [ '' ] I was able to start the domain without the virtual nic. However, with the vif in the cfg file, I got the following error when creating the domain: Error: Device 0 (vif) could not be connected. Could not find bridge, and none was specified I have already turned off iptables on my machine and dom0's network seems to work fine. I have also used "vif = [ '', "bridge=xenbr0' ] but the same error still shows up. If I set the mac address myself by "vif = [ 'mac=00:16:3e:00:00:11, bridge=xenbr0' ]", xm create hangs and attempt to switch to the domU's console with "xm consle fedora.fc6" also hangs. Any suggestion on where to look ? The output from brctl show: bridge name bridge id STP enabled interfaces xenbr0 8000.feffffffffff no vif0.0 peth0 The output from ifconfig: eth0 Link encap:Ethernet HWaddr 00:12:3F:FC:47:AF inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::212:3fff:fefc:47af/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 RX packets:2090 errors:0 dropped:0 overruns:0 frame:0 TX packets:2301 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1467230 (1.3 MiB) TX bytes:377124 (368.2 KiB) eth1 Link encap:Ethernet HWaddr 00:13:CE:67:E4:31 inet6 addr: fe80::213:ceff:fe67:e431/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:220 errors:0 dropped:34 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:263858 (257.6 KiB) TX bytes:588 (588.0 b) Interrupt:18 Base address:0xc000 Memory:dfbff000-dfbfffff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:686 errors:0 dropped:0 overruns:0 frame:0 TX packets:686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:107785 (105.2 KiB) TX bytes:107785 (105.2 KiB) peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:2088 errors:0 dropped:0 overruns:0 frame:0 TX packets:2304 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1476466 (1.4 MiB) TX bytes:388212 (379.1 KiB) Interrupt:16 vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:2301 errors:0 dropped:0 overruns:0 frame:0 TX packets:2091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:377124 (368.2 KiB) TX bytes:1467300 (1.3 MiB) xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:41 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3276 (3.1 KiB) TX bytes:0 (0.0 b) Regards, Levin Want to change your life? Find the perfect job with Lycos Jobs. Career Advice. Job Resources & Recommendations. Post your resume & find a job match! _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |