[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Initial networking not working
Apparao, Padmashree K wrote: Can you tell us what the vifnum is set to in the config file for the guest VM vifnum is not set in the VM config file. I guess that means it is using the default of 0. Should it be set to 1 or do that matter. Please let me know if other information would be helpful. Here is the VM config file: # Automatically generated xen config file name = "xenby2" memory = "1024" disk = [ 'tap:aio:/usr/scratch/xenby/xendisk2,xvda,w', ] vif = [ 'mac=00:16:3e:71:78:65, bridge=xenbr1', ] vnc=1 vncunused=1 uuid = "c6e09f72-1009-75a4-a26c-8ad48b626aa5" bootloader="/usr/bin/pygrub" vcpus=2 on_reboot = 'restart' on_crash = 'restart' Thanks, Cam Thanks - Padma -----Original Message----- From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Cam Macdonell Sent: Tuesday, April 03, 2007 1:25 PM To: xen-users@xxxxxxxxxxxxxxxxxxx Subject: [Xen-users] Initial networking not working Hi,I am trying to install FC6 under Xen on a cluster node whose ethernet card uses interface eth1. I modified the xend-config to use eth1(network-script 'network-bridge netdev=eth1')The installer boots and starts running. But the installer still cannot connect to the http server that has the FC6 installation on it. So there seems to be no networking within the Xen VM.Here is the output from brctl: bridge name bridge id STP enabled interfaces xenbr1 8000.feffffffffff no vif1.0 peth1 vif0.1 I realize this is a complete noob question, but any help is appreciated. Thanks, Cam _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |